uniCenta oPOS Hardware Installation Guide Jack Gerrard September 2009 This Hard

uniCenta oPOS Hardware Installation Guide Jack Gerrard September 2009 This Hardware Installation Guide deals with the setup and configuration of uniCenta oPOS after installation. It is a “How to” of key points for Security, Stock and Receipts to enable a quick customization to suit the users operation. Contents General Hardware Configuration ....................................................................................................................... 3 Configuration panel ........................................................................................................................................... 3 Touch screen ...................................................................................................................................................... 4 Barcode scanner ................................................................................................................................................ 4 Receipt printer and cash drawer........................................................................................................................ 5 Printer ................................................................................................................................................................ 5 javapos ............................................................................................................................................................... 6 Epson, Tmu220, Star, Ithaca, Surepos ............................................................................................................... 7 Screen ................................................................................................................................................................ 7 Customer Display ............................................................................................................................................... 7 Window .............................................................................................................................................................. 7 javapos ............................................................................................................................................................... 7 Epson, Ld200, Surepos ....................................................................................................................................... 8 Screen ................................................................................................................................................................ 8 Scale ................................................................................................................................................................... 8 Data collector ..................................................................................................................................................... 8 Report printer .................................................................................................................................................... 8 General Hardware Configuration This guide provides an easy way to understand how to configure hardware in Configuration panel To set up any hardware in UniCenta configure the parameters of the hardware connected to the terminal. All of these options are stored in local and each machine stores its own system configuration. UniCenta oPOS configuration e Configuration understand how to configure hardware in uniCenta o a oPOS you need to go to System -> Configuration. In the section rdware connected to the terminal. All of these options are stored in local and each figuration. oPOS version 2.30 and higher. the section Cash register you ns are stored in local and each The properties related to the register cash panel are: Name is the name of the POS terminal to identify operations from other POS terminals Skin provides a list of available themes which change the look and feel of uniCenta oPOS Screen sets if the application should be in a full screen or just in Window mode Tickets working mode of uniCenta oPOS. Standard (default mode) - allows multiple transactions (receipts) across a network of POS terminals and which can be opened or closed in any order by an POS terminal. Simple - allows only one transaction (receipt) at a time and only one POS terminal. If a new receipt is required the current transaction must be closed. Also, if this mode is used on a network of POS terminals transactions (receipts) cannot be shared. Restaurant allows receipts to be assigned to tables. Transactions are started by selecting a table from a graphical table plan before entry in the Sales panel. It shows a panel with the plants of the restaurant with all the tables and receipts opened. It also includes a module to manage reservations Customer Display output device of current transaction (receipt) such as: last ordered item, prices and total amount Printer the main receipt printer Printer2 an additional printer that could print i.e. an order to a kitchen printer or a bar printer Printer3 as Printer2 Scale receive data from weighing scales Scanner sets a barcode scanner to read product barcodes, customer and user identification cards Reports Printer the system printer used to print uniCenta oPOS management reports Touch screen Touch screens simulate a mouse. When a user touches the screen the system receives a mouse click event at the point the user touches. There is nothing to configure in uniCenta oPOS for Touch screens. The most common screen size for POS terminals is 15” which usually have a minimum 1024x768pixels resolution. However, uniCenta oPOS is capable of running on 10.4” screens successfully with an 800x600pixels resolution such as the Partner Tech PT-6200. Most popular touch screen systems today are developed by ELO TouchSystems and are very well supported in Windows and Linux. To test just press the touch screen and see how the mouse moves and clicks. Barcode scanner Barcode scanners simulate a keyboard. When a barcode scanner reads a barcode, it treats the barcode just as a keyboard would do. There is nothing to configure in uniCenta oPOS. Most popular barcode readers are provided by Metrologic, like Metrologic 9520 Voyager. To test the barcode scanner just open a text editor and scan a barcode. The value from the barcode should be displayed in the text editor. Receipt printer and cash dra uniCenta oPOS supports several receipt printers connected to the same terminal and you can configure up to 3 receipt printers in the configuration panel. Cash drawers printer command. The supported printer modes are: Printer This mode is for receipt printers and standard printers installed as a driver provided by the manufacturer of the printer. When you select this mode a drop-d Printer selection. In the drop down list if you select (Default) every time uniCenta oPOS wants to print a receipt or a document, a dialog will appear where you can printer to use. The check box sets the paper type. paper type "standard" is used. The r paper size commonly used in standard printers. Some advanced configuration can b of the chosen paper size; open the file paper.receipt.x paper.receipt.y paper.receipt.width paper.receipt.height paper.receipt.mediasizename The property mediasizename stands for the paper size name to use and can be one of the followings: Postcard, Statement, Letter, Executive, Legal A0, A1, A2, A3, A4, A5, A6, A7, A8, A9, A10 B0, B1, B2, B3, B4, B5, B6, B7, B8, B9, B10 ISOB0, ISOB1, ISOB2, ISOB3, ISOB4, EnvISOB0, EnvISOB1, EnvISOB2, EnvISOB3, EnvISOB4, EnvISOB5, EnvISOB6, EnvISOB7, EnvISOB8, EnvISOB9, EnvISOB10 C0, C1, C2, C3, C4, C5, C6 EnvPersonal, EnvMonarch, Monarch, Env9, Env10, Env11, Env15, c8x10 EnvDL, DL, EnvC0, EnvC1, EnvC2, EnvC3, EnvC4, EnvC5, EnvC6 en a text editor and scan a barcode. The value from the barcode should be sh drawer ceipt printers connected to the same terminal and you can configure up to 3 n panel. Cash drawers can be connected to the receipt printer and open with a d standard printers installed as a printer in the operating system using the system er of the printer. down list to select the printer and a check box to select the paper type will appear. Default) the default system printer will be selected and if you select print a receipt or a document, a dialog will appear where you can If the check box is ticked the receipt paper type will be used. I receipt paper type is for receipt type printers and the ard printers. be done to adjust the paper size used in your printer. file unicentaopos.properties file and look for the following name s for the paper size name to use and can be one of the followings: tter, Executive, Legal A6, A7, A8, A9, A10 B6, B7, B8, B9, B10 OB3, ISOB4, ISOB5, ISOB6, ISOB7, ISOB8, ISOB9, ISOB10 vISOB2, EnvISOB3, EnvISOB4, EnvISOB5, EnvISOB6, vISOB9, EnvISOB10 C6 , Monarch, Env9, Env10, Env11, Env15, c8x10 , EnvC2, EnvC3, EnvC4, EnvC5, EnvC6 he barcode should be u can configure up to 3 t printer and open with a ting system using the system ect the paper type will appear. nd if you select (Show dialog), here you can then select the be used. If un-ticked the standard paper type is for A4 To configure the parameters wing settings: e followings: OB8, ISOB9, ISOB10 EnvISOB6, 5, c8x10 The the properties x, y, width and h 1/72nds of an inch. Drawable area The default properties values for receipt printers are for paper.receipt.x=10 paper.receipt.y=287 paper.receipt.width=190 paper.receipt.height=546 paper.receipt.mediasizename=A4 If you have an Epson receipt printer modify the default values by the following: paper.receipt.x=10 paper.receipt.y=10 paper.receipt.width=190 paper.receipt.height=546 paper.receipt.mediasizename=A4 For standard printers the default properties values are defined for the paper.standard.x=72 paper.standard.y=72 paper.standard.width=451 paper.standard.height=698 paper.standard.mediasizename=A4 If you have another receipt printer or you want to set another paper size for your printer you wi these values. javapos This mode is for receipt printer and cash drawers with a javapos driver installed. javapos drivers are provided by the manufacturer of the receipt printer and the cash drawer and you have to install it following th instructions. When you select this mode two text boxes appear. The first box is for the javapos printer name defined when installed the driver and the second box is for the cash drawer name. Javapos name selection. height stands for the drawable area of the paper used. The units are defined in ceipt printers are for Star Micronics receipt printers and are the following: 6 name=A4 r modify the default values by the following: 6 name=A4 roperties values are defined for the A4 paper size and are the following: 1 98 ename=A4 or you want to set another paper size for your printer you wi cash drawers with a javapos driver installed. javapos drivers are provided by the r and the cash drawer and you have to install it following th t boxes appear. The first box is for the javapos printer name defined when box is for the cash drawer name. . The units are defined in and are the following: are the following: r you will need to modify drivers are provided by the ing the manufacturer r name defined when Epson, Tmu220, Star, I These modes are for different dialects of ESC/POS receipt printers connected to the machine using a serial port, a parallel port or any other kind of device port (like uploads/S4/ hardware-installation-guide.pdf

• Détails
• Publié le Oct 26, 2021
• Catégorie Law / Droit
• Langue French
• Taille du fichier 0.1969MB