alloy guide alloys for high performance corrosion corrosion Heat Heat wear wear

alloy guide alloys for high performance corrosion corrosion Heat Heat wear wear high performance alloys MetalTek 1. food & beverage 2. Military 4. hydro 5. petrochemical 6. pulp & paper 7. energy 8. aerospace 9. turbine engine 10. mining 11. naval 12. steel mills 13. pump & valve widest alloy selection for every industry and application 1. 2. 3. 4. 5. 6. 8. 7. 9. 13. 10. 11. 12. 3. nuclear metaltek capabilities We offer world-class products for demanding applications from multiple international facilities, a range of capabilities found nowhere else, and the technical horsepower to back it all up. Casting processes: Centrifugal casting: – Horizontal to 50” (1,270 mm) diameter, 240” (6,100 mm) length. – Vertical to 180” (4,572 mm) diameter. – Up to 34,000 lbs. (15,450 kg) cast weight. Static Sand casting: – To 144” (3,660 mm) cube. – Up to 30,000 lbs. (13,640 kg) cast weight. Investment casting: – To 40” x 40” x 30” (1,016 mm x 1,016 mm x 762 mm) envelope. – Up to 600 lbs. (273 kg) cast weight. Static HPLT casting: – To 96” (2,438 mm) cube. – To 14,500 lbs. (6,590 kg) cast weight. Continuous casting: – Bar to 9” (220 mm), rectangle to 4.5” x 20” (114 mm x 508 mm). – Up to 144” (3,660 mm) length. Other capabilities: Complete rough and finish machining. Large fabrication facilities. Argon Oxygen Decarburization refining. Heat treatment. Net-shaping and near net-shaping. In-house pattern making. Patternless molding. Rapid prototyping. Fully certified non-destructive testing. Solidification modeling. Vacuum casting. Certifications include: ISO 9001 AS 9100 Nadcap ASME Material Organization ASME 10CRF50AppB/10CFR21 Multiple Mil-specs Many others including numerous customer-specific approvals. What really sets us apart: Technical expertise – Over 50 engineers and metallurgists. Knowledge sharing – Casting seminars conducted at the customer site. Performance and cost improvement – Thousands of conversions from forgings or multi-piece fabrications to single piece castings. Alloy options – Master melt foundry routinely pouring more than 400 alloys. Market expertise – Large sales engineering staff understands your market. Value-added technologies – Unique capabilities save customers money. capabilities SIMILAR SPECIFICATIONS NOMINAL CAST ASTM MILITARY/ AMS OTHER Cu METALTEK GRADE Al Fe Ni Sn pb zn mn UNS ALUMINUM BRONZE GEAR BRONZE MTEK 65 C90700 C90700 B427, B505 QQ-C-390B SAE 65 (f) 88.8 11 MTEK 65+Ni C91600 C91600 B427 MIL-C-15345-23 88 1.5 10.5 MTEK 87-11-0-1 C92500 C92501 B505 QQ-C-390B 87 1 11 1 AGMA CL A C90800 C90800 B427, B505 87.8 12 AGMA CL B C91700 C91700 B427 86.5 1.5 12 MTEK 102-N C92900 C92900 B427, B505 83.5 2.8 9 2 BEARING BRONZE MTEK 85-5-5-5 C83600 C83600 B271, B62, B584 MIL-C-15345-1 SAE 40 (f) 85 5 5 5 MTEK 83-7-7-3 C93200 C93200 B271, B505, B584 MIL-C-15345-12 SAE 660 (f) 83 7 7 3 MTEK 80-10-10 C93700 C93700 B271, B22, B584 QQ-C-390B SAE 64 (f) 80 10 10 MTEK 78-7-15 HI LEAD C93800 C93800 B271, B66, B584 QQ-C-390B SAE 67 (f) 78 7 15 MTEK 79-6-15 HI LEAD C93900 C93900 B66 QQ-C-390B 79 6 15 MTEK 76-6-18 HI LEAD C94100 C94100 B66 QQ-C-390B 76 6 18 BEARIUM® B-4 70 4 26 BEARIUM® B-8 70 8 22 BEARIUM® B-10 70 10 20 BEARIUM® B-11 70 1.5 10 18 NAVY M C92200 C92200 B271, B61, B584 MIL-C-15345-9 SAE 622 (f) 88 6 1.5 4.5 NAVY G C90300 C90300 B271, B584 MIL-C-15345-8 SAE 620 (f) 88 8 4 NAVY G 1% LEAD C92300 C92300 B271, B584 MIL-C-15345-10 SAE 621 (f) 87 8 1 4 NICKEL - SILVER MTEK 12% Ni 410 C97300 C97300 B271, B584 MIL-C-15345-7 56 12 2 10 20 MTEK 20% Ni 412 C97600 C97600 B271, B584 MIL-C-17112 64 20 4 4 8 MANGANESE BRONZE LOW TENSILE C86500 C86500 B271, B584, B148 MIL-C-15345-4 SAE 43 (f) 58 1 1 39 1 MED. TENSILE C86200 C86200 B271, B584, B148 MIL-C-15345-5 SAE 430A (f) 63 4 3 27 3 HIGH TENSILE C86300 C86300 B271, B584, B148 MIL-C-15345-6 SAE 430B (f) 63 6 3 25 3 LEADED MANGANESE C86400 C86401 B271, B505, B148 QQ-C-390B 59 1 1 38 0.50 HIGH CONDUCTIVITY COPPER C81100 C81100 99.7 MIN COPPER SILVER (g) C11600 C11600 99.9 MIN CHROME ZIRC COPPER (g) C18100 C18100 98.45 MIN CHROME COPPER C81500 C81500 MIL-C-19310 BAL COPPER NI SI C81540 C81540 BAL 2-3 SPECIAL ALLOYS IN ADDITION TO THE ALLOYS LISTED, WE PRODUCE MTEK 125 C95200 C95200 B271, B505, B148 MIL-B-16833CL1 88 9 3 MTEK 150 C95220 C95220 BAL 10 3.5 2.5 MAX MTEK 175 C95400 C95400 B271, B505, B148 QQ-C-390B AMS 4870 (c) 85 11 4 MTEK 175-B C95410 C95410 B271, B505, B148 AMS 4871 (c) 85 11 4 MTEK 175-C C95400HT C95400HT B271, B505, B148 MIL-C-15345-13 85 11 4 MTEK 175 LOW IRON C95300 C95300 B271, B505, B148 QQ-C-390B 89 10 1 MTEK 230 C95500 C95500 B271, B505, B148 QQ-C-390B 81 11 4 4 MTEK 230-B C95500HT C95500HT B271, B505, B148 MIL-C-15345-14 AMS 4880 (d) 81 11 4 4 MTEK 230-N C95800 C95800 B271, B505, B148 MIL-B-24480 MIL-C-15345-28 ABS-4 81 9 4 5 1 MTEK 275 C95900 C95900 B271, B505, B148 BAL 13 4.5 MTEK 325 BAL 14 5 1 MTEK 375 BAL 14.5 5.5 (1) Produced under license of ARMCO Advance Materials Corp. (2) Produced under license of Avesta Jernverk AB. (3) Produced under license of Langley Alloys. (4) Produced under license of ESCO Corp. (a) AMS specifying sand casting. (b) AMS specifying investment casting. (c) AMS specifying centrifugal casting. (d) AMS specifying centrifugal and continuous casting. (e) Low carbon version available. (f) Cross reference only, spec discontinued. (g) Typical properties by forging. Trademarks: CENTRI-VAC is a MetalTek International trademark for vacuum melted centrifugal cast products. Nitronic, 14-4PH, 15-5PH, 17-4PH trademarks of ARMCO Advanced Materials. 20Cb-3, Greek Ascoloy trademarks of Carpenter Technology. Hastelloy, C-22, HR120, 230 trademarks of Haynes® International. IN, Incoloy, Inconel, Monel, Waspoloy trademarks of Special Metals. Ferralium trademark of Langley Alloys. MAR-M trademark of Martin Marietta. RENE and GTD 222 are trademarks of MetalTek - Black, PMS 423C & PMS 129C CHEMISTRY other TENSILE, ksi TENSILE, [MPa] yield, ksi yield, [MPa] elongation % 3000 KG min. 3000 KG typical 500 KG typical P 0.2 35 [240] 18 [125] 10 102 P 0.2 45 [310] 25 [170] 10 106 40 [275] 24 [165] 10 P 0.2 50 [345] 28 [195] 12 95 P 0.2 50 [345] 28 [195] 12 106 P 0.2 45 [310] 25 [170] 8 80 30 [205] 14 [95] 20 70 30 [205] 14 [95] 15 70 30 [205] 12 [80] 15 70 26 [180] 14 [95] 12 60 25 [170] 16 [110] 5 60 25 [170] 16 [110] 5 60 21.5 [150] 11 [75] 16 40 24 [165] 14 [95] 12 50 25.5 [175] 14.75 [100] 10 55 30 [210] 16 [110] 8 60 34 [235] 16 [110] 24 65 40 [275] 18 [125] 20 80 36 [250] 16 [110] 18 75 34 [235] 17.5 [120] 25 70 40 [275] 17 [115] 10 90 65 [450] 25 [170] 20 149 90 [620] 45 [310] 18 192 110 [760] 60 [415] 12 229 60 [400] 20 [140] 15 Ag .085 MIN. 34 [235] 30 [205] 20 79 Cr 0.60-0.80; Zr 0.10-0.15 60 [415] 50 [345] 25 Cr 0.4-1.5 45 [310] 35 [240] 12 89 Cr 0.10-0.60; Si 0.40-0.80 + Zr 80 [550] 65 [450] 15 192 CUSTOM ALLOYS TO MEET YOUR SPECIFICATIONS. SPECIAL DIE ALLOYS NORMALLY SPECIFIED FOR HARDNESS non-ferrous alloys 65 [450] 25 [170] 20 110 143 70 [485] 28 [195] 20 150 163 75 [515] 30 [205] 12 150 183 90 [620] 50 [345] 5 217 90 [620] 45 [310] 6 175 192 65 [450] 25 [170] 20 110 167 90 [620] 40 [275] 6 190 212 110 [760] 60 [415] 5 200 229 85 [585] 35 [240] 15 175 75 [515] 50 [345] 1 248 255 302 321 PLUS PROPRIETARY ELEMENTS 341 352 MECHANICAL PROPERTIES Minimum unless noted General Electric. 2545MO trademark of Avesto Jernverk AB, Escoloy 45D trademark of ESCO Corp. AL6XN trademark of Allegany Ludlum. Bearium, MTEK, CENTRI-VAC trademark of MetalTek International. Disclaimer: The data and information here are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. MetalTek International , its companies or businesses, makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special or consequential damages therefrom. This material is subject to revision without prior notice. SPECIAL ALLOYS IN ADDITION TO THE ALLOYS LISTED, WE PRODUCE CAST ASTM MILITARY/ AMS WROUGHT UNS WROUGHT GRADE C Cr METALTEK GRADE Ni Mn UNS MTEK CA6NM J91540 CA6NM, E3N A487, A757, A743 0.06 11.5-14.0 3.5-4.5 1.00 MTEK CA20NW J91631 5354 (b) S41800 Greek Ascoloy® 0.15-0.20 12-14 1.8-2.2 1.00 MTEK M-152 0.10-0.17 11.0-12.75 2-3 0.50-0.90 MTEK 535 0.06-0.11 9.8-11.2 0.20-0.80 0.60-1.15 MTEK 115 0.08-0.18 10.0-12.5 1.50 MAX 0.50-1.25 MTEK H46 H46 0.10-0.16 10-12 0.3-1.1 0.3-1.0 MTEK 410 J91150 CA15 A743, A487, A217 5351 (a) S41000 410 0.15 11.5-14.0 1.00 MAX 1.00 MTEK uploads/Geographie/ alloy-guide.pdf

Tags
Administrationanneal treated metaltek trademark trademarks
Documents similaires
  • 24
  • 0
  • 0
Afficher les détails des licences
Licence et utilisation
Gratuit pour un usage personnel Attribution requise
Partager