- 1 - Bendix ® ACom ® Diagnostics Diagnostic Software 6.5 User Guide - 2 - Cont

- 1 - Bendix ® ACom ® Diagnostics Diagnostic Software 6.5 User Guide - 2 - Contents General Information ..................................................................................................................................... 3 RP1210 Adapters ......................................................................................................................................... 4 PC Hardware Requirements ........................................................................................................................ 5 Technical Assistance .................................................................................................................................... 5 Installing Bendix ® ACom ® Diagnostics .......................................................................................................... 6 Using ACom Diagnostics ............................................................................................................................. 7 ACom Diagnostic Windows 6.5 screen ECU Status Screen ....................................................................... 10 Diagnostic Trouble Code Screen ............................................................................................................... 11 Wheel Speed Sensor Screen ..................................................................................................................... 12 Configuration Screen ................................................................................................................................. 13 Pressures Screen ...................................................................................................................................... 16 Bendix ® Trailer Roll Stability Program ® (TRSP) Sensors ............................................................................. 17 Sensor Calibration ..................................................................................................................................... 18 Component Test Screen ............................................................................................................................ 19 Installation Test .......................................................................................................................................... 22 Adaptive Cruise w/ Braking (ACB) Using ACom Diagnostics ..................................................................... 35 ACB Data Log ........................................................................................................................................... 39 Known Issues with ACom Diagnostics 6.5 ................................................................................................. 40 - 3 - General Information Bendix ® ACom ® diagnostics will provide the technician with the capability to configure and troubleshoot Bendix components. This application is designed to support the following Bendix ® brand products: • Bendix ® EC-60 ™ electronic controller • Bendix ® Wingman ® active cruise with braking • Bendix ™ VORAD ® VS400 radar system • Bendix ™ SmarTire ® Tire Pressure Monitoring System (TPMS) • Bendix ® TABS-6 ™ trailer ABS module • Bendix ® TABS-6 ™ ADV trailer ABS module • Bendix ® TABS-6 ™ ADV MC trailer ABS module • Bendix ® TABS-6 ™ ADV MV trailer ABS module • Bendix ® EC-30 ™ electronic controller • Bendix ® EC-17 ™ electronic controller • Bendix ® EC-30T ™ electronic controller • Bendix ® MC-30 ™ electronic controller • Bendix ® A-18 ™ electronic controller • Bendix ® Gen 4 (U1x) electronic controller • Bendix ® Gen 5 (U12 and U16) electronic controller IMPORTANT – PLEASE READ This guide, as well as the software described in it, is furnished under license and may only be used or copied in accordance with the terms of the license. Please contact the Bendix Tech Team for a copy of such license. The information provided in this manual is for informational purposes only and is subject to change without notice and should not be construed as a guarantee by Bendix Commercial Vehicle Systems LLC (“Bendix”). Bendix assumes no responsibility or liability for any errors or inaccuracies that may appear in this publication nor within the software itself. User is using the software “as-is”, “where-is” with no warranty implied or otherwise. At no time shall Bendix be liable to user for any direct, special, indirect, consequential, liquidated, punitive, or progressive damages relative to the use of the software hereunder. - 4 - RP1210 adapters The Bendix ® ACom ® Diagnostic software relies on RP1210 compliant hardware adapters for communication. A list of the recommended adapters is shown below. NOTE: ACom Diagnostics will remain in the demo mode unless there is at least one RP1210 driver installed on the computer. What follows is a list of supported hardware adapters for the software. Before using this software, verify that the driver (.dll) for the adapter to be used for communications is already loaded on the computer and is the latest version available from the adapter manufacturer. • NAVCom/NAVLink • Volvo 88890020 • Nexiq USB-Link • Nexiq Bluetooth USB-Link • Nexiq PLC adapter • Noregon DLA+ • Noregon DLA+PLC • Cummins Inline 5 • Cummins Inline 6 • Dearborn DPA4+ • Dearborn DPA5 • Dearborn PLC TestCon (may be available in a kit with DPA4+) NOTE: Adapters that interface using serial or parallel ports to the laptop are no longer supported. - 5 - PC hardware requirements Bendix ® ACom ® diagnostic software is designed to run on Windows ® 2000, XP, Vista and Windows 7 operating systems. Below are the minimum requirements for running the application. • 1 Gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor • 1 GB RAM • 1 GB free disk space • Internet Browser Microsoft Internet Explorer 6+ or equivalent • Adobe ® Acrobat ® (latest version recommended) • USB Communication port • VGA standard graphics adapter with a resolution of 800 x 600 (minimum), 1024 x 768 recommended • Windows-compatible keyboard and mouse NOTE: Windows ® 95 and 98 operating systems are not supported. The content displayed on an ACom Diagnostics screen depends on: the ECU selected on the Start page; and also on the features enabled on the ECU. Certain features/options of ACom Diagnostics may not be visible, since they do not apply to the ECU being inspected. For extended details on the features of a particular ACom Diagnostics screen, select the Help button located on that screen. Technical Assistance For any questions regarding setup or operation of ACom diagnostics please contact Bendix at 1-800-AIR-BRAKE (1-800-247-2725). See the Bendix website, www.bendix.com for periodic software updates. Licensing Information: BENDIX ® ACom ® diagnostic software requires an end user license agreement, including user consent, prior to installing the software on the user’s computer. - 6 - Installing Bendix ® ACom ® Diagnostics When installing Bendix ® ACom ® Diagnostics it is recommended that all other programs be closed. ACom Diagnostics will be installed using a setup wizard, during which the technician will need to acknowledge various questions for the installation to continue. Figure 1 The Bendix ACom Diagnostics software is installed to the default location of C:\Bendix\ACom Diagnostics. During installation of ACom Diagnostics 6.5, several applications will be installed and several installation windows will appear. If there are any older versions of the ACom Diagnostics on the computer during the set-up typically older versions will be un-installed. ACom Diagnostics 5.11 will also be installed along with the ACom Diagnostics 6.5. After a period of time, a pop-up box will be displayed indicating that the installation was successful. Figure 2 Next the Setup wizard will report that setup is complete and allow the technician to launch the ACom ® Diagnostics tool. - 7 - Using Bendix ® ACom ® Diagnostics An icon will be placed on the desktop. Double-click the icon, or select the ACom Diagnostics application from the Bendix install directory or Program group, to launch the program. A starter screen will appear. The starter screen has various features: 1. The desired communication adapter can be selected by clicking the icon depicting a computer and tractor/trailer. (See the arrow shown on Figure 4.) Select this icon to open the driver selection screen for RP1210 adapters. Check the box next to the adapter you will use, then press the green checkbox to confirm. Figure 3 2. The entry screen also allows the technician to select the ECU, if the technician knows which ECU they are diagnosing. See Figure 4. Select from the list on the starter screen and press the Start with ECU button. Figure 4 - 8 - 3. Alternatively the program will detect the ECU. The screen will indicate which Bendix ECU was found and the technician can select Launch to start Bendix ® ACom ® Diagnostics. Figure 5 4. Any ECU selection can be displayed in the DEMO mode by pressing the Start in Demo mode button. The Demo mode allows the technician to investigate the program’s features without communicating with an actual ECU. Figure 6 - 9 - The following ECU controllers are supported by diagnostic software on the Bendix ® ACom ® Diagnostics 6.5 CD: • Bendix ® EC-60 ™ electronic controller • Bendix ® Wingman ® active cruise with braking • Bendix ™ VORAD ® VS400 radar system • Bendix ™ SmarTire ® Tire Pressure Monitoring System (TPMS) • Bendix ® TABS-6 ™ ADV trailer ABS module • Bendix ® TABS-6 ™ ADV MC trailer ABS module • Bendix ® TABS-6 ™ ADV MV trailer ABS module • Bendix ® EC-30 ™ electronic controller • Bendix ® EC-17 ™ electronic controller • Bendix ® EC-30T ™ electronic controller • Bendix ® MC-30 ™ electronic controller • Bendix ® A-18 ™ electronic controller • Bendix ® Gen 4 (U1x) electronic controller • Bendix ® Gen 5 (U12 and U16) electronic controller Additionally, Bendix ACom diagnostic software 5.9 is included on the ACom 6.5 CD and will support the following: • Bendix ® EC-30 ™ electronic controller • Bendix ® EC-17 ™ electronic controller • Bendix ® EC-30T ™ electronic controller • Bendix ® MC-30 ™ electronic controller • Bendix ® TABS-6 ™ trailer ABS module • Bendix ® A-18 ™ electronic controller • Bendix ® Gen 4 (U1x) electronic controller • Bendix ® Gen 5 (U12 and U16) electronic controller If you have any questions about the operation of ACom Diagnostics 5.9, open the ACom Diagnostics 5.9 User Guide PDF available on the Bendix web site (www.bendix.com). - 10 - Bendix ® ACom ® Diagnostics 6.5 Windows ECU Status Screen Refer to the Service Data sheet for the system being diagnosed for all cautions and warnings; certain system changes (e.g. sensor position changes) require approval from Bendix Engineering. Bendix ® ACom ® Diagnostics software opens, by default, to the Electronic Control Unit (ECU) status screen. This screen provides the technician with a snap-shot of the ECU. uploads/Sante/ acom-65-user-guide 1 .pdf

Documents similaires

- 1 - Bendix ® ACom ® Diagnostics Diagnostic Software 6.5 User Guide - 2 - Cont 0 0

PRODUCT OVERVIEW 0 1 PRODUCT OVERVIEW 4 JPRO® PROFESSIONAL DIAGNOSTIC SOFTWARE 0 0

• Détails
• Publié le Aoû 30, 2022
• Catégorie Health / Santé
• Langue French
• Taille du fichier 3.0733MB