Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

stages ISOFIX child restraint ECE R44.04: A,C,D ECE R44.04: ISOFIX ECE R44.04:

stages ISOFIX child restraint ECE R44.04: A,C,D ECE R44.04: ISOFIX ECE R44.04: Group 0+/1 /2 (0–25kg) 2 GB Welcome to Joie™ Congratulations on becoming part of the Joie family! We are so excited to be part of your journey with your little one. While traveling with the Joie stages™ isofix you are using a high quality, fully certified safety Group 0+/1/2 child restraint. Please carefully read this manual and fol- low each step to ensure a comfortable ride and best protection for your child. To use this Joie stages™ isofix with a 3-point adult seat belt and the ISOFIX connections according to the ECE R44.04 Regulation, the child should weight 0-25kg (approximately 0-7 years old). This stages™ isofix can be installed using a 3 point retractable adult seat belt approved to ECE R16 or similar standard systems provided. Base These instructions show the use of the stages™ isofix seat and the base. This base can also be used with other certain Joie infant child restraints. Please read all the instructions in this manual before installing and using the product. ! IMPORTANT: KEEP FOR FUTURE REFERENCE. PLEASE READ CAREFULLY. Please keep the instruction manual in the storage compartment at the bottom of the base as right figure. 1 2 3 4 5 10 6 8 9 12 11 13 14 18 16 15 17 19 Parts List 1 Head Support 2 Seat Pad 3 Buckle 4 Adjustment Webbing 5 Child Restraint Latched Indicator 6 Load Leg Adjustment Button 7 Load Leg 8 Load Leg Adjustment Button 9 Child Restraint Release Button 10 Recline Adjustment Button 11 ISOFIX Releasing Button 12 Crotch Strap 13 Shoulder Strap 14 Infant Insert 15 Rebound Bar 16 ISOFIX Connector 17 ISOFIX Guides 18 Head Support Adjustment Lever 19 Side Impact Shield Please make sure there are no missing parts. Please contact the retailer if anything is missing. 7 1 2 WARNING ! NO child restraint can guarantee full protection from injury in an accident. However﹐ proper use of this child restraint will reduce the risk of serious injury or death to your child. ! Make sure that the straps holding the restraint to the vehicle should be tight and any straps restraining the child should be adjusted to the child's body. Check to make sure that the straps are not twisted. ! DO NOT install or use this child restraint without following the instructions and warnings in this manual or you may put your child at serious risk of injury or death. ! NEVER use ropes or any other substitutes in place of seat belts in case of injuries from restraint. ! DO NOT make any modifications to this child restraint or use it along with component parts from other manufacturers. ! DO NOT use this child restraint if it is damaged or has missing parts. ! DO NOT use forward facing mode before the child’s weight exceeds 9kg. Keep your child rearward facing as long as possible as rearward facing is the safest position. WARNING ! DO NOT have your child in swaddled clothes when using this child restraint in baby or toddler mode, because this may prevent your child from being properly and securely fastened by the shoulder harnesses and the harnesses between thighs. ! When using this child restraint in baby or toddler or Junior mode, the harness must be used correctly, and make sure the lap belt is not above the child’s pelvis portion. ! DO NOT leave this child restraint unsecured in your vehicle because an unsecured child restraint can be thrown around and may injure occupants in a sharp turn﹐ sudden stop﹐ or collision. Remove it if not in regular use. ! NEVER leave your child unattended with this child restraint. ! Don’t use it on front seat with active airbag when installed in rearfacing mode. ! NEVER use a second-hand child restraint or a child restraint whose history you do not know because they may have structural damage that endangers your child’s safety. 3 4 WARNING ! Please keep this child restraint away from sunlight﹐ otherwise it may be too hot for the child’s skin. ! DO NOT use this child restraint as a regular chair as it tends to fall down and could injure the child. ! DO NOT use this child restraint without the soft goods. ! The soft goods should not be replaced with any besides the ones recommended by the manufacturer﹐ because the soft goods constitute an integral part of the child restraint performance. ! DO NOT put anything other than the recommended soft goods in this child restraint. ! DO NOT put unsecured items in the vehicle because they can be thrown around and may injure occupants in a sharp turn﹐ sudden stop﹐ or collision. ! Do not place other items on top of the child restraint if it is in the car boot to prevent damage. ! Do not allow the car restraint harness or buckles to become trapped or caught in the vehicle seat or door. ! DO NOT continue to use this child restraint after it has suffered any crash. Replace immediately as there may be invisible structural damage from the crash. WARNING ! Remove this child restraint from the vehicle seat when it is not in use for a long period of time. ! To avoid suffocation, remove plastic bag and packaging materials before using this product. The plastic bag and packaging materials should then be kept away from babies and children. ! Consult the retailer for issues concerning mainte- nance﹐ repair and part replacement. ! Do not place any objects in the load leg area in front of your base. ! Frequently check the ISOFIX guides for dirt and clean them if necessary. Reliability can be effected by ingress of dirt, dust, food particles etc. ! DO NOT use any load bearing contact points other than those described in the instructions and marked on the child restraint. ! Correct Installation is only permitted by use of the ISOFIX connectors. ! Must use the rebound bar. 5 6 Emergency In case of emergency or accidents, it is most important to have your child taken care of with first aid and medical treatment immediately. Product Information 1. This Joie child restraint with base is classified for “Semi-Universal” use and is suitable for fixing into the seat positions of the following cars. This child restraint can be installed using a 3 point retractable adult seat belt approved to UN ECE R16 or similar standard (Using a 3 point retractable adult seat belt and ISOFIX at the same time while using the child restraint in Group 2 mode). 2. Seat positions in other cars may also be suitable to accept the child restraint. If in doubt, consult either the child restraint manufacturer or the retailer. 3. Please refer to our vehicle fitting list (on-product as well as online at our website). This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to UN ECE regulation 44, 04 series of amendments for general use in vehicles fitted with ISOFIX anchorages systems. It will fit vehicles with positions approved as ISOFIX positions (Please refer to our vehicle fitting list either), depending on the category of the child restraint and of the fixture. If in doubt, consult either the child restraint manufacturer or vehicle manufacturer. The ISOFIX size class for which this device is intended is A ,C, D. Suitable for Child weighing under 25kg Mass Group Group 0+/1 /2 Materials Plastics, metal, fabrics Patent No. Patents pending Concerns on Installation 1 2 4 3 5 7 6 1 2 4 3 5 7 6 1 2 3 A I R B A G 3 1 see images 1 - 3 Check provided car fitting list for approved seats for child seat attachment. 2 7 8 Installation Mode Installation Reference Age Recline Position <4 years 1 year to 4 years Position Position 1 -7 Approx Approx 1 -7 Baby mode Toddler mode 0-18kg Child's Weight Position 1 -7 ECE R44.04 15-25kg Junior Mode Approx 3-7 years Reference Images 1 1 2 9-18kg Choose the Installation Mode Detach the snaps on the head support to remove the head portion of the insert. We recommend using the full infant insert while the baby is 0-6 months or until they outgrow the insert. The infant insert increases side impact protection. Remove the head support portion of the infant insert when the child’s head no longer ﬁts comfortably. Remove the body portion of the infant insert when the infant’s shoulders no longer ﬁt comfortably. Remove the infant insert cushion by detaching the snaps to allow more space when the infant does not ﬁt comfortably. The cushion can be used separately without being attached to the insert to bolster the infant's back for more comfort. 1 2 Use Infant Insert 9 10 Installing the Base for use with the stages™ isofix seat Installation of ISOFIX Base System see images 4 - 13 4 1 Unfold the load leg from storage compartment. uploads/Voyage/joie-stages-isofix-manual-gb-20170512-pdf.pdf