Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Nbt retrofit general guide under construction coding necessary to get nbt started

NBT Retro ?t General Guide Under Construction -Coding Necessary to get NBT started Connect E-Sys Go to Expert Mode Coding Read Vehicle Order Save Edit This will take you to FA editor Right click on FA and select Calculate FP Expand FAList on left to SALAPA-element In the bottom add and change NH to NS Click apply Calculate FP again Save Go to Expert Mode VCM Load the saved FA ?le in the bottom section ?le tab Right-click FA and Calculate FP Go to VCM Master tab write FA FP The you need to VO code NBT and Kombi as following Expert Mode Coding Read FA VO Activate FA VO Read SVT VCM Left-Click on HUNBT Detect CAF for SWE Select the latest CAFD displayed OK Right-Click on HUNBT the ECU itself not the underlying CAFD CODE Repeat the last step but for the BKOMBI this time If you have a basic cluster Shawnsheridan http www bimmerfest com forums showpost php p postcount HUNBT KOMBICIC kombilow HUNBT BASISKOMBIMMI LIST aktiv -Find Donor VIN Shawnsheridan http f bimmerpost com forums showpost php p postcount You can go to Comfort Mode FSC Check FSC Status and at the top of the Log report it will show the Head Unit VIN C- Fix USB in Armrest TokenMaster http www bimmerfest com forums showpost php p postcount What I did was modify the armrest side plug I looked at it and noticed that the tabs was symmetrical so with minor modi ?cations it works and looked OEM now First modi ?cation clip o ? the locking tab like so White plug without the locking tab Since the cable is actually short instead of rotating it I removed the other part where USB devices cables plug into This is also symmetrical so I rotated that degrees This is the part CHSD and the USB port connected for testing This works with original Apple Lightning cable My el-cheapo cables still don't although they do work perfectly on a higher powered USB plug like the Apple charger and my laptop ports and even my old HU ENTRY BMW Apps work charging work - again on o ?cial Apple lightning cable only I suspect this is due to older ?rmware on this NBT unit C- Touch Control Jalami https f bimmerpost com forums showpost php p postcount HUNBT HMI ZBETOUCHINTERACTIVEMAP set to aktiv HUNBT HMI ZBETOUCHSPELLER set to aktiv HUNBT HMI ZBETOUCHBROWSER set to aktiv HUNBT SYSTEM EINSTELLUNGEN ZBETOUCH set to aktiv -Touch Controller ZBE Pins Shawnsheridan http f bimmerpost com forums showpost php p postcount ZBE Pins - V Pin NBT -GND Pin NBT -CAN -H Pin NBT -CAN -L Pin NBT -Rewire For KCan GotoMoto http f bimmerpost com forums showpost php p postcount C- ConnectedDrive Vithy http www bimmerfest com forums showpost php p postcount If it's Factory the following FDL coding should work If not try this On your VO add the following codes AK NS NR and Remove AA NF and NK Make