Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Bizhub c3850 intallation guide

INSTALLATION MANUAL Applied Machines Be sure to correctly follow the procedures in order as explained in this Installation Manual If you do not follow the procedure in order the image trouble may occur I Outline of installation procedures PF-P DK-P WT-P FS -P Machine KP- AU- MK-P FK- MK- Varies depending on the model and applicable marketing area When installing the machine and associated options as a system follow the order shown on the upper Note ? For the detailed installation procedures for each option follow the instructions given in the corresponding installation manual and perform the procedures correctly Optional devices must be installed after completing the main unit installation ? Once the Power Switch is turned ON do not turn OFF it until the installation work has been completed Caution ? Lifting the machine in an awkward position or transporting it in a poorly balanced position could result in personal injury When transporting the machine assign an adequate number of persons to the job and ensure that each person can take a good position of not being excessively loaded mass approx kg - lb E- A GN- - C - - - - II Installation space unit mm inch bizhub C PF-P DK-P - - - - - - III Pre-installation check items Select a level and stable place for installing the machine Be sure to use a power source of the voltage and frequency indicated in the product speci ?cations Ensure that the current carrying capacity of the power outlet is at least equal to the current listed in the product speci ?cations Power the machine directly from a dedicated power outlet Do not use an extension cord Do not plug or unplug the power cord with wet or dirty hands otherwise you may get an electric shock Avoid a hot and humid environment or a place exposed to direct sunlight Avoid a dusty location or a place near volatile and ammable substances Avoid a poorly ventilated place IV Notes on using touch panel Be sure to instruct users on the following points ? This machine uses a capacitive touch panel When you touch the touch panel use your ?nger or the stylus pen for the capacitive touch panel If you touch the panel using your nail or a pen tip instead of using your ?nger or the stylus pen the touch panel does not respond normally ? Pressing the touch panel hard may cause damage ? Do not strongly press the panel or press it using the sharp tip of mechanical pencils ? The key is a ?nger tapping quick light touch using a ?nger operation E- CV Accessory parts No Name Q ? ty Safety Information Guide Quick start guide Installation manual User ? s guide CD CD-ROM Paper size label Label Legal restrictions on copying Label Super G label Panel sheet Power cord instruction Power cord Modular cable Cord clamp Cover A set set set set Cover B Screw A Screw B Note This manual