Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Gs3 installation guide HANDMADE IN FLORENCE GS Installation Guide Version C CEnglish GS Table of Contents Installation Guide Unpackage GS Espresso Machine Fill with water Initial Fill a Drain Box Alignment Connect to power supply Turn on main power Turn o

HANDMADE IN FLORENCE GS Installation Guide Version C CEnglish GS Table of Contents Installation Guide Unpackage GS Espresso Machine Fill with water Initial Fill a Drain Box Alignment Connect to power supply Turn on main power Turn on espresso machine Remove group cover Remove air from group head bleeding the group Monitor co ?ee boiler pressure Adjust the expansion valve Monitor steam boiler pressure Brew espresso Verify working boiler pressures Connect to main water supply Congratulations on your purchase of the La Marzocco GS espresso machine For the latest up to date information on the GS please visit our GS website http www lamarzocco com gs html www lamarzocco com Version CInstallation Guide English Unpackage espresso machine and set on a level surface Ensure all accessories are included with shipment Check for any visable damage to espresso machine Water Reservoir Drain Box Fill Cover Finger Grips Remove Open the ?ll cover and ?ll the reservoir with ?ltered water Slide the reservoir back into position and replace the drain box Make sure the drain box is inserted fully The water reservoir must make contact with the level indicators on the rear side Failure to make contact will result in the display message ??Re ?ll Tank ? The message ??Re ?ll Tank ? will be displayed anytime the reservoir does not have contact with the level indicators NOTE The GS is con ?gured to work with the water reservoir To connect the GS to the mains water supply and the waste drain system please refer to the section Version La Marzocco S r l Firenze Italia CEnglish GS Installation Guide Alignment Holes Alignment Pins a IMPORTANT NOTE The drain box must be installed correctly for the machine to function properly The drain box has two alignment pins that mate with two alignment holes on the base of the GS When installing the drain box ensure that the alignment pins are inserted into the alignment holes It may be necessary to push slightly on the front of the drain box to achieve proper alignment www lamarzocco com Version CEnglish Installation Guide Connect the power cord to a power supply capable of supplying VAC and amps for the V version or VAC and Amps for the V version Turn on power by pressing the main power switch The main power switch may be found on the left rear of the machine Version La Marzocco S r l Firenze Italia CEnglish GS Installation Guide Turn the Espresso machine on by pressing the on o ? key key The espresso machine will begin to ?ll both the steam boiler and the co ?ee boiler simultanously The machine will stop ?lling when the water reservoir is low When the message ??Re ?ll Tank ? is displayed re ?ll the water reservoir See Step to ?ll water reservoir Now it is necessary to remove all of the air in the co ?ee boiler and saturate the group This is commonly referred to as bleeding the group To do