Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Etabs guide How to Model and Analyze Structures Using ETABS Prepared by Yamen Ammar Dannan C Page Steps for ETABS Prepared by Yamen Dannan For more questions yamen dannan hotmail com C Page Install ETABS Open ETABS MAIN STEPS New Model Press File - New Mo

How to Model and Analyze Structures Using ETABS Prepared by Yamen Ammar Dannan C Page Steps for ETABS Prepared by Yamen Dannan For more questions yamen dannan hotmail com C Page Install ETABS Open ETABS MAIN STEPS New Model Press File - New Model Choose the following settings Design the Grid Only according to building plan of beams Spacing method It is better to ?ll the uniform grid spacing and then modify it with the custom grid De ?ne story data similar stories heights It is advised to ?ll in the simple story data and then modify it using the Custom story Press Ok The project is ready to start De ?ne Materials ??Steel and Concrete ? from De ?ne - Material Properties Use default numbers only change Strength of concrete Fc ? if needed Note psi is the Concrete and A fy is the Structural steel and A Gr is the Rebar Steel Prepared by Yamen Dannan For more questions yamen dannan hotmail com C Page De ?ne your Beams Columns De ?ne - Section property- Frame Sections Press Add new Property ? Choose section shape Name the section Choose material psi De ?ne Dimensions Press ??Modify Show Rebar ? button - If it ? s a column you can choose the reinforcement and choose ??to be checked ? or leave it as default and choose Choose section type Beam or Column FOR BEAMS Special Purpose Set Modi ?ers as shown FOR COLUMNS Special Purpose Set Modi ?ers as shown Repeat steps for as many beams columns as required De ?ne your Slabs De ?ne - Section property- Slab Sections - Add new Property Modeling type Shell - Thin Type - Slab and choose required thickness FOR SLABS Special Purpose Set Modi ?ers as shown Prepared by Yamen Dannan For more questions yamen dannan hotmail com C Page De ?ne your Walls De ?ne - Section property- Wall Sections - Add new Property Modeling type Shell - Thin Choose thickness FOR SHEAR WALLS Special Purpose Set Modi ?ers as shown Make sure you select the correct type of adding depending on modeling choice Realistic View To get a visible view of the building components while drawing go to View - Set display options - check Object ?ll Extrusion Start drawing columns Draw - Draw Beam Column Brace - Quick Draw Columns then select the previously de ?ned Column from the Property Drop list And start placing them on the ??Master story ? Or by dragging the cursor over all the nodes which have columns to be placed on them Prepared by Yamen Dannan For more questions yamen dannan hotmail com C Page Draw the beams Draw - Draw Beam Column Brace - Draw Beams Columns Braces then select the previously de ?ned beam sections from the Property Drop list Start drawing the beams extending from corner to corner depending on required design IMPORTANT NOTE after you ? re done drawing Columns and Beams It is essential to release the