Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

AMPLIFIER APPLICATION GUIDE AMP 100 AMP 102 AMP 110 AMP 210 AMP 310 Amplifier G

AMPLIFIER APPLICATION GUIDE AMP 100 AMP 102 AMP 110 AMP 210 AMP 310 Amplifier Guide AudioSource AMP series amplifiers are designed for home and commercial audio distribution systems where high quality sound, flexibility, and reliability are essential. The AMP series offers exceptional value and many features that will make their installation and use easy and convenient. The AudioSource AMP series consists of 5 amplifier models ranging from 50 watts per channel to 150 watts. The amplifiers share some common features with intelligent industrial design, superior engineering and value as key components to the AMP series success story. AMP Series Products….. Value Priced Engineering Excellence! All models incorporate the following features: 1. Bridgeable Outputs 2. Dual Stereo Inputs 3. Priority Input Switching (Automatic) 4. Heavy Duty Aluminum Faceplates 5. Stereo Line Outputs 6. Separate Volume and Balance Controls 7. 5-Way Binding Posts 8. A and B Speaker Selector Switches 9. Auto On (By-passable) Amplifier Technology The AMP 110, AMP 210, and AMP 310 incorporate very precise circuit topology to ensure the best audio reproduction. Dual Differential Error amplifiers ensure linearity and low noise operation. Triple Darlington output stages ensure the amplifier can drive complex speaker loads without adding distortion. In addition, toroidal power transformers are used with large filter capacitors to create stunning audio dynamics. Careful Engineering When discussing AMP series products with your contractors it’s important to note that the entire AMP series went through rigorous testing procedures in Portland, Oregon by AudioSource’s engineering staff. Years of audio engineering experience have been applied to these amplifiers to ensure years of use. AMP100 AMP102 AMP110 AMP210 AMP310 Number of Channels 2 2 2 2 2 Load Impedance 8ohm 4ohm 8ohm 4ohm 8ohm 4ohm 8ohm 4ohm 8ohm 4ohm Rated Output Power 50 60 50 75 75 110 90 125 150 225 Frequency Response 20-20kHz 20-50kHz 20-50kHz 20-50kHz 20-50kHz Signal to Noise Ratio 100dB 100dB 100dB 100dB 100dB Input Sensitivity 1.5Vrms 350mV- 2.8Vrms 350mV- 2.8Vrms 350mV- 2.8Vrms 350mV- 2.8Vrms THD at Rated Power <.2% <.1% <.1% <.1% <.1% Dimensions 2.9"H x 16.5"W x 9.25"D 3.8"H x 16.5"W x 8.25"D 3.8"H x 16.5"W x 13.75"D 3.8"H x 16.5"W x 13.75"D 5.5"H x 16.5"W x 13.75"D Weight 12 lbs 14.7 lbs 23.1 lbs 24 lbs 33.1 lbs AMP 100 Applications: Ideal for use as a remote amplifier Use with Whole House Distributed Audio Systems Second Zone Amplifier Amplify MP3 Players Rear Channel Amplifier for Dolby 6.1 and 7.1 Systems Perfect for Computers and Video Games Key Features: Affordable! 2 Independent channels rated at 50 watts into 8 ohms 60 watts per channel into 4 ohms Independent level and balance control Dual Auto-Switching Inputs Auto Signal Sensing Power On A/B Speaker selector Bridgeable Specifications Power: 50 watts RMS @ 8 ohms 60 watts @ 4 ohms Less than 0.2% THD into 8 ohms Input Sensitivity 1.5 Vrms S/N Ratio: 100 dB A-weighted Frequency response: 20Hz to 20kHz AMP 102 Applications: Ideal for use as a Remote Amplifier Use with Whole House Distributed Audio Systems Second Zone Amplifier Amplify MP3 Players Rear Channel Amplifier for Dolby 6.1 and 7.1 Systems Perfect for Computers and Video Games Ideal for In-Wall and In-Ceiling Speaker Systems Key Features: Even More Affordable Power! 2 Independent channels rated at 50 watts into 8 ohms 75 watts per channel into 4 ohms Independent level and balance control Dual Auto-Switching Inputs Auto Signal Sensing Power On A/B Speaker selector Front Panel diagnostic LEDs Bridgeable 12VDC “Trigger On” Rack-mount ready Specifications Power: 50 watts RMS @ 8 ohms 75 watts @ 4 ohms Less than 0.1% THD into 8 ohms Input Sensitivity: 350mV to 2.8Vrms S/N Ratio: 100 dB A-weighted Frequency response: 20Hz to 50kHz AMP 110 Applications: Ideal for use as a Remote Amplifier Use with Whole House Distributed Audio Systems Second Zone Amplifier Amplify MP3 Players Rear Channel Amplifier for Dolby 6.1 and 7.1 Systems Perfect for Computers and Video Games Ideal for In-Wall and In-Ceiling Speaker Systems Key Features: 2 Independent channels rated at 75 watts into 8 ohms Line 1/ Line 2 Priority input switching Line 2 Auxiliary output Front panel diagnostic LEDs Signal sensing “Power On” Bridgeable 12VDC “Trigger On” Speaker A/B Switching Triple-Darlington Power Amplifier Stages Dual-differential error amplifiers Rack-mount ready Specifications Power: 75 watts RMS @ 8 ohms 110 watts @ 4 ohms 225 watts @ 8 ohms bridged Less than 0.1% THD into 8 ohms Input Sensitivity 350mV to 2.8Vrms S/N Ratio: 100 dB A-weighted Frequency response: 20Hz to 50kHz AMP 210 Applications: • Ideal for use as a remote amplifier • Single or Dual Zone Amplifier • Amplify MP3 Players • Rear Channel Amplifier for Dolby 6.1 and 7.1 Systems • Excellent Stand-Alone Stereo Amplifier Key Features: • Incredible Value! • 2 Independent channels rated at 90 watts into 8 ohms • Line 1/ Line 2 Priority input switching • Line 2 Auxiliary output • Front panel diagnostic LEDs • Front panel balance and volume trim controls • Independent rear left/right master level controls • Signal sensing “Power On” • Bridgeable • 12VDC “Trigger On” • Speaker A/B switching • High level inputs • Triple-Darlington Power Amplifier Stages • Dual-differential error amplifiers • Rack-mount ready Specifications • Power: 90 watts RMS @ 8 ohms • 125 watts @ 4 ohms • 250 watts @ 8 ohms bridged • Less than 0.1% THD into 8 ohms • Input Sensitivity 350mV to 2.8Vrms • S/N Ratio: 100 dB A-weighted • Frequency response: 20Hz to 50kHz AMP 310 Applications: • Ideal for use as a remote amplifier • Single or Dual Zone Amplifier • Amplify MP3 Players (With Authority!) • Rear Channel Amplifier for Dolby 6.1 and 7.1 Systems • Excellent Stand-Alone Stereo Amplifier Key Features: • Massive Flexible Power! • 2 Independent channels rated at 150 watts into 8 ohms • Line 1/ Line 2 Priority input switching • Line 2 Auxiliary output • Front panel diagnostic LEDs • Front panel balance and volume trim controls • Independent rear left/right master level controls • Signal sensing “Power On” • Bridgeable • 12VDC “Trigger On” • Speaker A/B switching • High level inputs • Triple-Darlington Power Amplifier Stages • Dual-differential error amplifiers • Rack-mount ready Specifications • Power: 150 watts RMS @ 8 ohms • 225 watts @ 4 ohms • 450 watts @ 8 ohms bridged • Less than 0.1% THD into 8 ohms • Input Sensitivity 350mV to 2.8Vrms • S/N Ratio: 100 dB A-weighted • Frequency response: 20Hz to 50kHz What products go with the AudioSource AMP Series? Any Program Source or Speaker You Want to Attain Peak Performance With! The most exciting feature of the AMP series is the flexibility these products have to connect into any audio system: new or already installed, large or small, high-tech or traditional. This versatility comes from the expansive feature set built into all the AudioSource AMP products. Connect to other AudioSource products, such as the EQ 200, or powered subwoofers PSW 110 and PSW 112. Or connect to any receiver, MP3 player, TV, PC, Satellite Radio, Tape Deck, Phono... or any other source. 1. Use the High Level (Speaker Level) inputs on the AMP210/AMP310 to upgrade a zone that has speakers installed already 2. Save energy costs with the Auto-on or 12V Trigger-On feature 3. Add the ultimate gaming experience to a room using the auto-override feature of the AMP series by plugging in the audio out jack of any gaming console to the Line 1 inputs. 4. Add an MP3 player to a distributed audio system that automatically interrupts the regular program material just by pushing “Play” 5. A powered subwoofer connects to the AMP by plugging the Line 2 output of the amplifier, or amplified speaker outputs to the subwoofer. These are all easily planned upgrades that will keep your customers coming back for future upgrades and more audio excitement. AMP Series… Let’s Look at Some More Applications The timer available on the AMP 210/310 provides maximum flexibility, no matter what the job The timer available on the AMP 210/310 provides maximum flexibility, no matter what the job Line 1 IN: Use as a secondary input. Will override Line 2 IN when signal present Adjustable delay between Line 1 IN shut off and Line 2 IN turn on (3 to15 seconds) AMP Features Provide Endless Connection Options Line 2 IN: Always use as primary input Using the speaker level inputs on the subwoofer it will operate for either Line 1 IN or Line 2 IN sources. Applications at a Glance… 1) Easily add excellent TV sound 2) Plan future upgrades with amplifier Zone B output Line 2 IN (Primary Input) Line 2 OUT (Auxiliary Output) Amplifier AMP 100 AMP 102 AMP 110 AMP 210 AMP 310 In-Wall Speakers* AC5W AC6W AC8W AC515W AE5S AE6S AE8S AE515 *or use any pair of 4-8 Ohm speakers Powered Subwoofer PSW 110 PSW 112 Source: Cable Box Digital Antenna Surround Receiver or TV Audio Outputs Audio Line OUT from TV The TV sound package provides excellent audio reproduction where television uploads/s3/ amplifier-application-guide-amp-100-amp-102-amp-110-amp-210-amp-310.pdf