HUBBELL® Power Systems CHANCE – CENTRALIA, MISSOURI FEBRUARY 2010 2101 Insulate

HUBBELL® Power Systems CHANCE – CENTRALIA, MISSOURI FEBRUARY 2010 2101 Insulated Hand Tools W arranty - Material Hubbell P ower System s, Inc. warrants all products sold by it to be merchantable (as such term is defined in the Uniform Commercial Code) and to be free from defects in material and workmanship. Buyer m ust notify the Company promptly of any claim under this warranty . The Buyer's exclusive remedy for breach of this warranty shall be the repair or replacement, F .O .B. factory , at the Company's option, of any product defective under the warranty which is returned to the Company within one year from the date of shipment. NO O THER W ARRANTY , W HETHER EXPRESS OR ARISING BY OPERA TION OF LA W , COURSE OF DEALING, USA GE OF TRADE OR O THER W ISE IMPLIED , SHALL EXIST IN CONNECTION W ITH THE COMP ANY'S PRODUCTS OR ANY SALE OR USE THEREOF . The Com pany shall in no event be liable for any loss of profits or any consequential or special damages incurred by Buyer. The Company's warranty shall run only to the first Buyer of a product from the Com pany , from the Company's distributor, or from an original equipment manufacturer reselling the Company's product, and is non-assignable and non-transferable and shall be of no force and effect if asserted by any person other than such first Buyer. This warranty applies only to the use of the product as intended by Seller and does not cover any misapplication or misuse of said product. W arranty - Application Hubbell P ower System s, Inc. does not warrant the accuracy of and results from product or system performance recommendations resulting from any engineering analysis or study . This applies regardless of whether a charge is made for the recommendation, or if it is provided free of charge. Responsibility for selection of the proper product or application rests solely with the purchaser. In the event of errors or inaccuracies determined to be caused by Hubbell P ower Systems, Inc., its liability will be lim ited to the re-performance of any such analysis or study . 0.05 to 1.0 1.1 to 15.0 15.1 to 36.0 36.1 to 46.0 46.1 to 72.5 72.6 to 121 138 to 145 161 to 169 230 to 242 345 to 362 500 to 550 765 to 800 (ft.-in.) (m) Nominal Voltage in Kilovolts Phase-to-Phase Phase-to-ground exposure Distance Phase-to-phase exposure (ft.-in.) (m) * 2-1 2-4 2-7 3-0 3-2 3-7 4-0 5-3 8-6 11-3 14-11 * 0.64 0.72 0.77 0.90 0.95 1.09 1.22 1.59 2.59 3.42 4.53 * 2-2 2-7 2-10 3-6 4-3 4-11 5-8 7-6 12-6 18-1 26-0 * 0.66 0.77 0.85 1.05 1.29 1.50 1.71 2.27 3.80 5.50 7.91 Live-Line Work Minimum Approach Distances • Distances agree with OSHA guidelines in Table R-6 of the Federal Register, published 1/31/94. These distances take into consideration the highest switching surge an employee will be exposed to on any system with air as the insulating medium and the maximum voltages shown. • The clear live-line tool dis- tance shall equal or exceed the values for the indicated voltage ranges. *Avoid contact. Section 2100 ©Copyright 2009 Hubbell Incorporated • 210 North Allen Street • Centralia, MO 65240 USA www.hubbellpowersystems.com E-mail: hpsliterature@hps.hubbell.com NO TE: Because Hubbell has a policy of continuous product im provem ent, we reserve the right to change design and specifications without notice. Printed in USA RGS 2M 12/09 NOTICE: For latest revision of our Catalog and Literature, please visit our web site: www.hubbellpowersystems.com WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK CHANCE – CENTRALIA, MISSOURI FEBRUARY 2010 HUBBELL® Power Systems 2102 To convert any Grip-All stick to use all Universal Tool Accessories, Single-Piece Style The most versatile tool in a lineworker’s hands, the Grip-All stick puts an easy-to-control “finger” on an insulated pole. Although primarily designed for installing hot-line and grounding clamps, it serves both overhead and underground circuits with various end fittings. Commonly called a “shotgun,” the operating mechanism in- corporates a sliding hand grip that opens the hook to grasp a clamp eyescrew and retract it into the tool head. A thumb latch then must be depressed to release the locked hand grip so it can open the hook. While the tool head is of Lexan® for close-quarter operations, the worker must maintain recommended working distance solely on the Epoxiglas® pole section of the handle as the hook and its actuator are metal parts. Easy to care for, Grip-All sticks do not require field stripping to clean. All insulated parts including the operating rod are outside the main pole, readily accessible to wipe dry. CAUTION: Do not clean the plastic head with solvent. Grip-All Clampsticks New for the 21st Century with black head and *stainless steel components For storage bags, see Catalog Section 2500. †For metal universal fitting on handle end of any Single-Piece or Hinged Grip-All, add suffix “A” to the Catalog Number. Head Repair Kit, also available as Cat. No. C4031420, includes head, roll pin, epoxy bond kit and instructions. Overall Length 11⁄4" x 4' 9" 11⁄4" x 6' 8" 11⁄4" x 8' 7" 11⁄4" x 10' 7" 11⁄4" x 12' 7" †Catalog No. C4030291 C4030292 C4030293 C4030294 C4030295 Weight 53⁄4 lb./2.6 kg. 61⁄2 lb./2.9 kg. 71⁄4 lb./3.3 kg. 8 lb./3.6 kg. 83⁄4 lb./3.9 kg. Hinged Style Ideal for troubleshooters with limited tool-storage space in their cars, this folding version operates with the same features as the one-piece style. Extended 11⁄4" x 6' 9" 11⁄4" x 8' 8" 11⁄4" x 10' 8" 11⁄4" x 12' 8" 11⁄4" x 14' 8" 11⁄4" x 16' 8" †Catalog No. C4030296 C4030297 C4030298 C4030299 C4030342 C4030343 Weight 8 lb./3.6 kg. 9 lb./4.1 kg. 10 lb./4.5 kg. 101⁄2 lb./4.7 kg. 11 lb./5.0 kg. 111⁄2 lb./5.2 kg. Folded 3'4" 4'4" 5'4" 6'4" 7'4" 8'4" For storage bags, see Catalog Section 2500. 069598 Jaw Spring PSP4033460P Jaw (*S/S) 058804P Pin PSP4033458P Safety Stop (*S/S) PSP4033462P Lockbar (*S/S) 069599P Latch Spring Molly Jack 058719P Nut P4033152P Compression Spring P4032312P End Cap (11⁄4" dia.) 068270P Groove Pin PSP4033461P Latch (*S/S) P4032044P Plastic Handle 058735P Drive Rivet P0010760P Roll Pin PSP4033482P Black Plastic Head M1867 Notch in tool head aligns the clamp while the operator places it. To accept grounding clamps with long eyescrews, all Grip-All clamp- sticks feature 63⁄4 inches of head travel. For smooth operation, investment-casting stainless steel components include Jaw, Jaw Holder, Safety Stop, Lockbar and Latch illustrated below.* Replacement Parts for Single-Piece and Hinged Grip-All Clampsticks PSP4033459P Jaw Holder (*S/S) 058718P Pin 058717P Screw the M1867 Adapter secures in the clampstick hook and head housing. HUBBELL® Power Systems CHANCE – CENTRALIA, MISSOURI FEBRUARY 2010 2103 Retracted Length 5'61⁄2" 8'61⁄2" Extended Tool can lock at each length: 5'101⁄2", 7'11⁄4", 8'33⁄4" 8'101⁄2", 10'81⁄4", 12'6", 14'33⁄4" Retracted Length 5'23⁄4" 8'23⁄4" Extended Tool can lock at each length: 5'63⁄4", 6'91⁄2", 8' 8'63⁄4", 10'41⁄2", 12'21⁄4", 14' Grip-All Clampsticks, Telescoping New for the 21st Century with black head Telescoping Style Our Telescoping Grip-All Stick can replace several conventional clamp- sticks. With fewer sticks, it still permits linemen to serve their many safe- working distances and positioning needs. This can reduce the number of clampsticks required on a line truck, saving limited storage space. Engineered interface between sections ensures that tool retracts with full control. Close fit also helps keep out dirt and moisture. Top section is of foam-center Epoxiglas® insulated pole. Basic clampstick functions of this telescoping style are identical to the fixed-length style. All controls can be manipulated while wearing gloves. Easy to disassemble, the Telescoping Grip-All Stick must be kept clean and dry inside and out for maximum personnel protection. For storage bags, see Catalog Section 2500. Weight 6 lb./2.7 kg. 8 lb./3.6 kg. Catalog No. C4031035 C4031036 Factory-installed universal fitting on end opposite the clampstick head. Available in two sizes, each readily locks at variable working lengths. The design features a rotating coupler and an engineered positive-lock button with safety stop to keep the sections from parting or the hook releasing while in use. The mechanism locks the sec- tions into a solid and rattle-free tool. Grip-All Clampstick Assist Ring Assist Ring provides a suspension midpoint for any Grip- All clampstick. Particularly helpful on longer sticks, the assembly permits a support line to attach at the smaller ring. To help maintain safe-working clearances for hotline procedures, an insulated Strain Link Stick* of proper size should be used in the handline. Assist Ring halves assemble simply by threaded fasteners. Keyhole shape for operating rod permits clampstick to function as usual. Catalog No. Description Weight E4032543P Grip-All Assist Ring 11/2 lb./0.68 kg. *For Strain Link Sticks, see Catalog Section 2250. Telescoping Style with Universal Fitting on Handle Weight 6 lb./2.7 kg. 8 lb./3.6 kg. Catalog No. C4033060 C4033061 For storage bags, see Catalog Section 2500. For SAFETYSHIELD™ Hot Stick Barrier to fit tools on this page, see page 2129. CHANCE – uploads/s3/ guide-hvgb.pdf

Tags
Administrationuniversal chance catalog stick weight
Documents similaires
  • 21
  • 0
  • 0
Afficher les détails des licences
Licence et utilisation
Gratuit pour un usage personnel Attribution requise
Partager