Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Appendix installation instructions rcws

APPENDIX INSTALLATION INSTRUCTIONS ?? RCWS FOAMSEALR OC -D Smooth top surface of foundation wall to have minimal variation Unroll FoamSealR sill plate gasket on top surface of foundation wall or fasten to bottom of sill plate on tilt-up wall sections with ridged side toward roughest surface Overlap all end and perpendicular joints Pierce FoamSealR sill plate gasket at anchor bolt locations Set and anchor sill plate to foundation wall FOAMULAR ESR- FOAMULAR insulation boards measuring ft by ft m by m or ft by ft m by m should be installed horizontally or vertically with long joints and end joints in contact with one another When installed directly on framing members the insulation boards measuring ft by ft m by m must be installed horizontally and framing members are spaced a maximum of -inches on center a For wood framing the insulation boards are attached using -inch- diameter-head mm galvanized nails -inch-crown mm galvanized staples d ring-shank nails with -inch mm plastic washers or equivalent fasteners long enough to penetrate framing a minimum of -inch mm or through the sheathing whichever is less b For steel framing the insulation boards are attached using No Type S drywall screws with -inch mm plastic washers long enough to penetrate the framing a minimum of -inch mm Fasteners must not be over-driven Fasteners must be spaced a minimum of -inches on center around the perimeter and -inches on center in the ?eld JOINTSEALR OC -C Remove release liner backing material and center the adhesive tape over the joint to be sealed Continue to remove the liner and press the tape ?rmly in place over the joint Lap intersections or joined tapes a minimum of -inches Using a J-Roller or laminate roller roll the tape ?rmly in place to ensure intimate contact between tape and substrate and to eliminate trapping air between the tape and substrate To obtain best adhesion JointSealR Foam Joint Tape should be installed when outdoor temperatures are C