Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Bibliographie 193 Bibliographie [1] Hohenemser K., Prager W., The problem of fa

Bibliographie 193 Bibliographie [1] Hohenemser K., Prager W., The problem of fatigue strength under complex stresses. Metallwirt-schaft, June 1933, Bd. XII, Heft 24, pp. 342-343. [2] Gough H.J., Pollard H.V, The strength of metals under combined alternating stresses. Proceedings of the Institution of Mechanical Engineers, London, November 1935, Vol. 131, N° 3, pp.1-103. [3] Gough H.J., Pollard H.V., Clenshaw W.J., Some experiments on the resistance of metals to fatigue under combined stresses. Aeronautical Research Council, Report and Memoranda N° 2522, London : HMSO, 1951, 141 p. [4] Lee S.B., Evaluation of Theories on Multiaxial Fatigue with Discriminating Specimens. Ph.D. Thesis, Stanford University, 1980, 174 p. [5] Lee S.B., A criterion for fully reversed out-of phase torsion and bending. ASTM STP 853, K.J. Miller and M.W. Brown Eds., Philadelphia : American Society for Testing and Materials, 1985, pp. 553-568. [6] Lee S.B., Biaxial and multiaxial fatigue. London : Mechanical Engineering Publication, 1989, pp. 621. [7] You B.R. and Lee S.B., A critical review on multiaxial fatigue assessments of metals. Int. J. Fatigue, 1996, Vol. 18, N° 4, pp. 235-244. [8] Davies V.C., Discussion of "The strength of metals under combined alternating stresses" by Gough H.J. and Pollard H.V. Proceedings of the Institution of Mechanical Engineers, 1935, Vol. 131, N° 3. [9] Nishihara T., Kawamoto M., The strength of metals under combined alternating bending and torsion. Memoirs of the College of Engineering, Kyoto Imperial University, 1941, Vol. 10, N° 6, pp.177-201. [10] Nishihara T., Kawamoto M., The strength of metals under combined alternating bending and torsion with phase difference. Memoirs of College of Engineering, Kyoto Imperial University, 1945, Vol. 11, N° 5, pp. 85-112. [11] Weber B., Kenmeugne B., Clement J.C., Robert J.L., Improvements of multiaxial fatigue criteria for a strong reduction of calculation duration. Computational Materials Science 1999, à paraître. [12] Stulen F.B., Cummings H.N., A failure criterion for Multiaxial Fatigue Stresses. Proceedings of American Society for Testing and Materials. Philadelphia, 1954, Vol. 54, pp. 822-835. [13] Findley W.N., Fatigue of metals under combinations of stresses. Transactions of the American Society of Mechanical Engineers, 1957, Vol. 79, pp. 1337-1348. Bibliographie 194 [14] Yokobori T., Yoshimurat T., A criterion for fatigue fracture under multiaxial alternating stress state. Institute for Strength and Fracture of Materials, Tohoku University, Sendaï, Japan, 1966, Report of Research. [15] McDiarmid D.L., A general criterion of fatigue failure under multiaxial stress. Proceedings of Second International Conference on Pressure Vessel Technology, American Society of Mechanical Engineers, San Antonio, Texas, U.S.A, 1973, Vol. II- 61, pp. 851-862. [16] McDiarmid D.L., A new analysis of fatigue under combined bending and twisting. The Aeronautical Journal of the Royal Aeronautical Society, 1974, Vol. 78, N° 763, pp. 325- 329. [17] Dang Van K., Sur la résistance à la fatigue des métaux. Sciences et techniques de l’Armement, 1973, N° 47, 3ème fascicule, pp. 641-722. [18] Dang Van K., Le Douaron A. and Lieurade H.P., Multiaxial fatigue limit : a new approach. Advances in Fracture Research, 6th Int. Conf. Fracture, New Dehli, 1984, pp. 1879-1885. [19] Matake T., An explanation on fatigue limit under combined stress. Bulletin of the Japan Society of Mechanical Engineers, 1977, Vol. 20, N° 141, pp. 257-263. [20] Matake T., Fatigue strength of notched specimen under combined stress. Bulletin of the Japan Society of Mechanical Engineers. 1980, Vol. 23, N° 179, pp. 623-629. [21] Flavenot J.F., Skalli N., L’épaisseur de couche critique ou une nouvelle approche du calcul en fatigue des structures soumises à des sollicitations multiaxiales. Senlis : CETIM, Septembre 1982, Rapport 12G254. [22] Flavenot J.F., Skalli N., L’épaisseur de couche critique ou une nouvelle approche du calcul en fatigue des structures soumises à des sollicitations multiaxiales. Commission de Fatigue des Métaux, Amorçage des Fissures sous Sollicitations Complexes, Paris, 1984, pp. 87-97. [23] Dang Van K., Griveau B., Message O., On a new multiaxial fatigue criterion : theory and application. Biaxial and Multiaxial Fatigue. EGF 3 (Edited by M.W. Brown and K.J. Miller), London : Mechanical Engineering Publications, 1989, pp. 479-496. [24] Froustey C., Fatigue multiaxiale en endurance de l’acier 30NCD16. Thèse de l’ENSAM, Talence, Septembre 1987, 131 p. [25] Munday E.G., Mitchell L.D., The maximum-distorsion-energy ellipse as a biaxial fatigue criterion in view of gradient effects. Experimental Mechanics, 1989, Vol. 29, pp. 12-15. [26] Galtier A., Séguret J., Critères multiaxiaux en fatigue: exploitation en bureau d’étude. Proposition d’un nouveau critère, Revue Française de Mécanique, 1990, N° 4, pp. 291-299. [27] Galtier A., Contribution à l’étude de l’endommagement des aciers sous sollicitations uni ou multi-axiales. Thèse de l’ENSAM, Talence, Mai 1993, 342 p. [28] Deperrois A., Sur le calcul des limites d’endurance des aciers. Thèse de l’Ecole Polytechnique, Palaiseau, Juin 1991, 259 p. Bibliographie 195 [29] Robert J.L., Contribution à l'étude de la fatigue multiaxiale sous sollicitations périodiques ou aléatoires. Thèse de l'Institut National des Sciences Appliquées (INSA) de Lyon, N°ordre 92 ISAL 0004, Janvier 1992, 229 p. [30] Sines G., Failure of materials under combined repeated stresses with superimposed static stress. November 1955, Washington : NACA Technical Note 3495, 69 p. [31] Sines G., Behavior of metals under complex static and alternating stresses. Metal Fatigue - New-York : Mac Graw-Hill, Book Company, 1959, pp. 145-169. [32] Sines G., Ohgi G., Fatigue criteria under combined stresses or strains. Journal of Engineering Materials and Technology, 1981, Vol.103, pp. 82-90. [33] Crossland B., Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel. Institution of Mechanical Engineers, International Conference on Fatigue on Metals, London, 1956, pp. 138-149. [34] Crossland B., The effect of pressure on the fatigue of metals. In Mechanical Behaviour of Materials under Pressure, Pugh H.LI.D. (ed), Amsterdam : Elsevier, 1970, pp. 299- 354. [35] Marin J., Interpretation of fatigue strengths for combined stresses. Proceedings of the International Conference on Fatigue of Metals, Institution of Mechanical Engineers, London, 1956, pp. 184-194. [36] Deitman H., Issler L., Strength calculation under multiaxial out-of-phase fatigue loading. Proceedings of the Sixth Congress on Materials Testing, Budapest, 1974. [37] Grübisic V., Simbürger A., Fatigue under combined out-of-phase multiaxial stresses. Proceedings of the International Conference on Fatigue Testing and Design, Society of Environmental Engineers, London, April 1976, Vol. 2, pp. 27.1-27.28. [38] Simbürger A., Festigkeitsverhalten zäher werkstoffe bei einer mehrachsigen phasenverschobenen schwingbeanspruchung mit körperfesten und veränderlichen hauptspannungsrichtungen. L.B.F., Darmstadt, Bericht, 1975, Nr.FB-121, 247 p. [39] Smith J.O., The effect of range of stress on fatigue strength of metals. University of Illinois, Engineering Experiment Station, February 1942, Bulletin 334, Vol. 39, N° 26 [40] Papadopoulos I.V. - Fatigue polycyclique des métaux: une nouvelle approche. Thèse de l'Ecole Nationale des Ponts et Chaussées, 18 décembre 1987, 443 p. [41] Robert J.L., Fogue M., Bahuaud J., Fatigue life prediction under periodical or random multiaxial stress states. Automation in Fatigue and Fracture : Testing and Analysis. ASTM STP 1231, C. Amzallag Ed., Philadelphia : American Society for Testing and Materials, 1994, pp. 369-387. [42] Pisarenko G.S., Lebedv A.A., in Russian (Deformation and strength of materials under multiaxial stress state). Kiev: Naukova Dumka, 1976, 415 p. [43] Altenbach H., Zolochevski A., A unified model of low cycle fatigue damage. Fourth International Conference on Biaxial / Multiaxial Fatigue, Paris, May 31-June 3, 1994, Vol. 2, pp. 117-128. Bibliographie 196 [44] Kakuno H., Kawada Y., A new criterion of fatigue strength of a round bar subjected to combined static and repeated bending and torsion. Fatigue of Engineering Materials and Structures, 1979, Vol. 2, pp. 229-236. [45] Hashin Z., Fatigue failure criteria for combined cyclic stress. Int. J. Fracture, 1981, Vol. 17, N° 2, pp. 101-109. [46] Yuan-Sheng Cheng, Physical interpretation of Hashin’s criterion of fatigue failure under multiaxial stress. Engng. Fracture Mechanics, 1986, Vol. 24, N° 2, pp. 165-167. [47] Fogue M., Critère de fatigue à longue durée de vie pour des états multiaxiaux de contraintes sinusoïdales en phase et hors phase. Thèse de l'Institut National des Sciences Appliquées (INSA) de Lyon, N°ordre 87 ISAL 0030, Juillet 1987, 189 p. [48] Fogue M., Bahuaud J., Fatigue multiaxiale à durée de vie illimitée. 7ème Congrès Français de Mécanique, Bordeaux, 1985, pp. 30-31. [49] Froustey C., Lasserre S., Dubar L., Essais de fatigue multiaxiaux et par blocs, validation d'un critère pour les matériaux métalliques. MAT-TEC 92, Grenoble, 1992, pp. 79-85. [50] Papadopoulos I.V., Fatigue limit of metals under multiaxial stress conditions - The microscopic approach. Technical Note N°I.93-101, (ISPRA) : Commission of the European Communities, Joint Research Centre, 1993, ISEI/IE 2495/93, 46 p. [51] Papadopoulos I.V., Exploring the high cycle fatigue behaviour of metals from the mesoscopic scale. Journal of the Mechanical Behaviour of Materials, 1996, Vol. 6, N° 2, pp. 93-118. [52] Papadopoulos I.V., Davoli P., Gorla C., Filippini M. and Bernasconi A., A comparative study of multiaxial high-cycle fatigue criteria for metals. Int. J. Fatigue, 1996, Vol. 19, pp. 219-235. [53] Palin-Luc T., Fatigue multiaxiale d’une fonte GS sous sollicitations combinées d’amplitude variable. Thèse de l’ENSAM, Talence, Novembre 1996, 261 p. [54] Palin-Luc T., Lasserre S., High cycle multiaxial fatigue energetic criterion taking into account the volumic distribution of stresses. Proceeding of 5th International Conference on Biaxial/Multiaxial Fatigue & Fracture, uploads/Litterature/ m-bibliographie.pdf