Single and Twin PCB Relays Plug-In Relays High Current Solutions Latching Solut

Single and Twin PCB Relays Plug-In Relays High Current Solutions Latching Solutions Altern. Power Systems Relay Type Power K (V23133-A / 076-A) Mini K (V23072-A / C) DMR (V23084-C) PK2 THT / THR (V23201-C / R) Micro K THT / THR (V23086-C1 / R1 / C2 / R2) Micro K SMD (V23086-M1 / M2) Nano Relay THT / THR (V23138-C1 / R1 and C2 / R2) Mini ISO Maxi ISO Micro ISO Micro Low Noise (V23145) Mini / Maxi Shrouded Relays SPR (V23135) HCR 75 (V23232) HCR 150 (V23132) BDS-A (V23130-C) Micro Latching (V23145-L) Mini Latching (V23141-L) PK2 Latching (V23201-L) Micro K Latching (V23086-L) Kilovac LEV100 Features • Limiting continuous current 40 A • Wide voltage range •  High current version Power K-S (V23071) available • Limiting continuous current 20 A • 24 V versions with special contact gap •  Various contact arrangements and materials • Also available for 42 V applications • Limiting continuous current 30 A •  Easiest PCB routing among all PCB relays •  Wave (THT) and reflow (THR / pin-in- paste) solderable versions •  60% volume reduced Power K at increased performance •  PCB area requirements minimized by 50% to only 293 mm2 • Limiting continuous current 40 A • Latching version available •  Wave (THT) and reflow (THR / pin-in- paste) solderable versions • Single and twin versions • Small power relay • Limiting continuous current 30 A • Minimal weight • Low noise operation • Single and twin versions •  Small relays for surface mounted technology • Limiting continuous current 30 A • Minimal weight • Low noise operation •  Relay designed for convection and infrared reflow soldering •  Wave (THT) and reflow (THR / pin-in- paste) solderable versions • Single and twin versions •  Smallest automotive PCB relays in their classes (PCB area 81 mm2 / 157 mm2) •  First automotive relays using overmold- ing technology • Limiting continuous current 30 A • Very easy routing of PCB-layout • Power-saving high impedance coil • Low noise operation • Limiting continuous current 40 A at 85 °C •  Pin assignment similar to ISO 7588 part 1 • Plug-in or PCB terminals • Also available for 42 V applications •  Customized versions on request: 24 V versions with 0.8 mm contact gap, inte- grated components (e.g. resistor, diode), customized marking / color, special covers (e.g. notches, release features, brackets), various contact arrange- ments and materials • Limiting continuous current 70 A • Pin assignment similar to ISO 7588 part 1 • Plug-in or PCB terminals •  Customized versions on request: 24 V versions with 0.8 mm contact gap, integrated components (e.g. resistor, diode), customized marking / color, special covers (e.g. notches, release features, brackets) • Limiting continuous current 25 A at 85 °C •  High current version with limiting con- tinuous current 30 A at 85 °C •  Pin assignment according to ISO 7588 part 3 •  Customized versions on request: 24 V versions with 0.6 mm contact gap, integrated components (e.g. diode), customer marking, special covers (e.g. notches, release features, brackets) • Noise level below 50 dB(A) • Limiting continuous current 20 A •  Pin assignment according to ISO 7588 part 3 • Plug-in terminals •  Customized versions on request: special marking, special covers (e.g. notches, release features, brackets) •  Limiting continuous current 40 A (Mini) at 85 °C / 70 A (Maxi) •  Pin assignment according to ISO 7588 part 1 • Bracket •  Customized versions on request: integrated components (e.g. diode), customized marking •  Full, symmetric star-point disconnection of an electric power steering motor • Limiting continuous current 90 A •  Disconnection of high over-currents up to 200 A in 12 V and up to 60 A in 36 V power nets •  Contact arrangement fulfills 42 V power net requirements •  Resistant against high ambient tempera- ture up to 125 °C • Optimized dimensions •  Limiting continuous current 75 A •  Dustproof and sealed versions •  Limiting continuous current 150 A at 85 °C •  Current switching ability up to 300 A •  Suitable for voltage levels up to 42 V •  Heat moisture and vibration resistant •  Minimal contact resistance •  Dustproof and sealed versions •  Limiting continuous current 190 A at 85 °C •  Electrically settable and resettable ON / OFF bistable device •  Suitable for voltage levels up to 42 V •  High peak current carrying capability up to 1500 A •  Magnetically latched Micro ISO plug-in relay •  Two coils with set and reset function •  Pin assignment according to ISO 7588 part 3 •  Plug-in terminals •  Customized versions on request: special marking, special covers (e.g. notches, release features, brackets) •  Magnetically latched Mini ISO plug-in relay •  Two coils with set and reset function •  Pin assignment similar to ISO 7588 part 1 •  Plug-in terminals •  Customized versions on request: special marking, special covers (e.g. notches, release features, brackets) •  Magnetically latched PCB power relay •  Limiting continuous current 50 A •  Increased ambient temperature 125 °C •  Maximum switch on current •  Reduced coil power consumption of latching version allows higher limiting continuous current and increased ambi- ent temperature •  60% volume reduced Power K •  Design allows highest reliability •  High shock and vibration resistance •  No change of switching state version at breakdown of battery voltage •  Smallest magnetically latched PCB relay •  Only set and reset pulse no continuous coil power required •  Increased ambient temperature up to 125 °C •  Limiting continuous current up to 35 A •  Footprint compatible with Micro Relay K •  Two coils with set and reset function •  Minimal weight •  900 VDC 100 A, hermetically sealed DC contactor •  Side or bottom mount - not position sensitive ELV / RoHS / WEEE status Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant RoHS Compliant Contacts Contact arrangement 1 Form A 1 Form C 1 Form A 1 Form C 1 Form U 2 Form C 1 Form A 1 Form A 1 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 1 Form A / (2 x 87) 1 Form C 1 Form U 1 Form A 1 Form A 1 Form C 1 Form A 1 Form C 1 Form A (Mini) 1 Form C (Mini) 1 Form A (Maxi) 1 Triple make contact 1 Form A 1 Bifurcated contact 1 Form A 1 Form X 1 Form X 1 Form A 1 Form A 1 Form A 1 Form C 1 Form X Max. switching current – ON [A] 100 A 30 / 100 A (NC / NO) 60 A 12/60 A (NC/NO) 2 x 40 A 35 A 200 A 40 A (100 A) 40 A 40 A 40 A 40 A 30 A 30 A 120 A 45/120 A (NC/NO) 2 x 100 A 240 A 120 A 40 / 120 A (NC / NO) 100 A 40 A 120 A 45/120 A (NC/NO) 240 A 75 A 150 A 300 A 300 A 190 A - 50k / 100 A - 100k 50 A 200 A 200 A 50 A on set contact, 20 A on reset contact 600 A (Make) at +400 V Max. switching current – OFF [A] 60 A 30 / 60 A (NC / NO) 20 A 10/20 A (NC/NO) 2 x 20 A 35 A 40 A 30 A 30 A 30 A 30 A 30 A 30 A 30 A 60 A 40/60 A (NC/NO) 2 x 40 A 70 A 30 A 15 / 30 A (NC / NO) 30 A 30 A 60 A 40/60 A (NC/NO) 70 A 200 A / > 10 cycles 75 A 100 A 300 A 300 A 190 A - 50k / 100 A - 100k 30 A 40 A 40 A 30 A on set contact, 20 A on reset contact 1000 A (Break) at +400 V Max. switching current – ON / OFF / ON at 23 °C [A] 1500 A - 5 times Max. limiting current at 23 °C [A] 120 A 1500 A for 200 ms, 1000 A for 1 s Limiting continuous current at 23 °C [A] 45 A 30 / 45 A (NC / NO) 15 A 10/15 A (NC/NO) 2 x 10 A 30 A motor reverse 40 A 30 A 25/30 A (NC/NO) 25/30 A (NC/NO) 25 / 30 A (NC / NO) 25 / 30 A (NC / NO) 25 / 30 A (NC / NO) 25 / 30 uploads/Litterature/ relay-selection-guide.pdf

Tags
littérature contacts relay quick current contact
Documents similaires
  • 18
  • 0
  • 0
Afficher les détails des licences
Licence et utilisation
Gratuit pour un usage personnel Attribution requise
Partager