Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Allen & Heath 1 XONE:42 User Guide USER GUIDE Publication AP6857 Allen & Heath

Allen & Heath 1 XONE:42 User Guide USER GUIDE Publication AP6857 Allen & Heath 2 XONE:42 User Guide Limited One Year Warranty This product is warranted to be free from defects in materials or workmanship for period of one year from the date of purchase by the original owner. To ensure a high level of performance and reliability for which this equipment has been designed and manufactured, read this User Guide before operating. In the event of a failure, notify and return the defective unit to ALLEN & HEATH Limited or its authorised agent as soon as possible for repair under warranty subject to the following conditions Conditions Of Warranty The equipment has been installed and operated in accordance with the instructions in this User Guide. The equipment has not been subject to misuse either intended or accidental, neglect, or alteration other than as described in the User Guide or Service Manual, or approved by ALLEN & HEATH. Any necessary adjustment, alteration or repair has been carried out by ALLEN & HEATH or its authorised agent. This warranty does not cover fader wear and tear. The defective unit is to be returned carriage prepaid to ALLEN & HEATH or its authorised agent with proof of purchase. Units returned should be packed to avoid transit damage. In certain territories the terms may vary. Check with your ALLEN & HEATH agent for any additional warranty which may apply. This product complies with the European Electro magnetic Compatibility directives 89/336/EEC & 92/31/EEC and the European Low Voltage Directives 73/23/EEC & 93/68/EEC. This product has been tested to EN55103 Parts 1 & 2 1996 for use in Environments E1, E2, E3, and E4 to demonstrate compliance with the protection requirements in the European EMC directive 89/336/EEC. During some tests the specified performance figures of the product were affected. This is considered permissible and the product has been passed as acceptable for its intended use. Allen & Heath has a strict policy of ensuring all products are tested to the latest safety and EMC standards. Customers requiring more information about EMC and safety issues can contact Allen & Heath. XONE:42 User Guide AP6857 Issue 1 Copyright © 2007 Allen & Heath Limited. All rights reserved Allen & Heath Limited Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK http://www.allen-heath.com http://www.xone.co.uk Allen & Heath 3 XONE:42 User Guide PACKED ITEMS Check that you have received the following: Safety Sheet Important ! Read this sheet before starting. Retain for future reference. Registration Card Complete and return to Allen & Heath to register your product. Mains Lead Check that the correct mains plug is fitted. Xone:42 mixer Spare knobs and buttons TO PC USB Allen & Heath 4 XONE:42 User Guide CONTENTS Congratulations on purchasing the Allen & Heath Xone:42 performance DJ mixer. To ensure that you get the maximum benefit from the unit please spare a few minutes familiarizing yourself with the controls and setup procedures outlined in this user guide. For further information please refer to the additional information available on our web site, or contact our technical support team. http://www.xone.co.uk http://www.allen-heath.com Warranty ....................................................... 2 Packed Items................................................. 3 Contents........................................................ 4 Panel Drawings............................................. 5 Introduction.................................................. 6 Specifications................................................. 7 Block Diagram.............................................. 8 Mic / USB Channel Input............................ 9 Phono / Line Input Channels 1 and 4....... 11 Line / Line Input Channels 2 and 3........... 13 Filters Section............................................... 14 Headphone Section ..................................... 16 Master Section.............................................. 17 Crossfader..................................................... 18 Rear Connectors ......................................... 19 USB Connection .......................................... 22 Filter Reference............................................ 23 Operating Levels.......................................... 24 Earthing.......................................................... 25 Replacing the Crossfader / Face Plate ..... 26 User-Replaceable Parts............................... 27 “You’ve tried it your way, now try it ours …” Allen & Heath 5 XONE:42 User Guide PANEL DRAWINGS Rear Panel Front Panel RECORD R L BOOTH R L X:FX RTN R L MIX OUT LEFT RIGHT R L LINE L R PHONO L R INPUT 1 LINE L R PHONO L R INPUT 2 LINE L R L R INPUT 3 LINE L R L R INPUT 4 100 - 240V~ 47-63Hz ~ 30W MAX MADE IN THE UK BY ALLEN & HEATH LIMITED FUSE T500mAL 250V 20mm I 0 ON OFF SERIAL No: AC MAINS IN ~ WARNING: REPLACE FUSE WITH SAME TYPE AND RATING. STRICTEMENT IDENTIQUE EN VALEURS. ATTENTION: REMPLACER PAR UN FUSIBLE DO NOT EXPOSE APPARATUS TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK WARNING: THIS APPARATUS MUST BE EARTHED. CAUTION FOR CONTINUED PROTECTION AGAINST RISK OF FIRE X:FX SND IN L R OUT L R USB AUDIO LINE LINE A B A B TO PC USB Allen & Heath 6 XONE:42 User Guide INTRODUCTION TO THE XONE:42 The Xone:42 is a high performance 12” analogue DJ mixer featuring four stereo dual input channels, a Mic/USB channel, 60mm linear VCA channel faders, an analogue VCF filter, and the new X:FX external effects loop with wet/dry control. This mixer is designed to seamlessly interface with current leading-edge DJ technology, and may be used by the widest range of DJs - from those who keep it in the bedroom, to regular performers and profes- sionals. The same rugged build quality of vertical circuit board construction that is used throughout the Xone range ensures that the Xone:42 can deal with any environment expected of it, and its ergonomic, intuitive layout and stylish graphics make the Xone:42 one of the most easy-to-use hi-tech mix tools around. Each of the four main stereo channels is equipped with a powerful three band equalizer providing a safe +6dB of boost and total kill for complete frequency isolation. Nine point metering on each channel al- lows for precise matching of signal levels, and smooth VCA faders help to ensure a perfect mix. Individual channels can be routed to either side of the 45mm VCA crossfader, which has an adjustable curve control for smooth mixes or virtually instant attack suitable for scratching. The Xone:42 incorporates the X:FX system that enables an external effects processor to be easily inter- faced, with a single knob controlling the proportion of the channel signal sent to the effects unit, from 0% (dry) to 100% (wet). The Xone:42 is also equipped with the legendary Xone VCF filter system. Each of the four main channels can be individually routed to the filter, and the X:FX Return to Filter function allows channel signals that have been through an external effects unit to be subsequently routed through the filter. Three basic filter types can be selected: hi-pass, band-pass and low-pass. These filter types can be added together to create other filter types; for example, hi-pass and low-pass together create a notch filter. Each filter type can be swept from 20Hz to 20 kHz by the rotary frequency control, whilst resonance can be set from “mild” to “wild”. A filter reference is included towards the end of this User Guide. The mixer incorporates a USB audio interface for easy connection to a computer and integration of digi- tal media. It can be used to play back music files from a laptop and to record mixes from the Xone:42, or when used with appropriate software, as a digital DJ effects unit that can be patched into the X:FX. The USB input combines with an XLR microphone input to provide an additional channel with two band +/- 12dB EQ and rotary level control. A powerful headphone amp ensures more than adequate monitor level, while two separate headphone sockets are provided on 3.5mm and ¼” Jack. A split cue feature allows the cue signal to be monitored in the left headphone and the main mix in the right. The master section has individual controls for the main mix and booth. Stereo nine point output meters display the post master level output, or the pre-fade source level when a cue is selected. In split cue mode the left meter displays the cue level and the right meter the master output. A dedicated booth output, record out at -8dBu, and balanced main mix outputs on XLR round off the Xone:42’s impressive list of features. Allen & Heath 7 XONE:42 User Guide Dimensions and Weights The console is fitted with rubber feet for desktop operation. Width Height Depth Weight Mixer 305 mm (12“) 84 mm (3.3“) 358 mm (14”) 5 kg (11 lbs) Packed 490 mm (19.5”) 205 mm (8.1”) 450 mm (17.7”) 7 kg (15.4 lbs) SPECIFICATIONS Nom / max output levels Main Mix +4dBu +27dBu Booth 0dBu +22dBu X:FX Send 0dBu +20dBu Record Out -10dBV +10dBV Internal headroom Channels +22dB Frequency response +/-0.5dB 10Hz - 20kHz Distortion < 0.03% THD+noise @1kHz Crosstalk < -90dB inter-channel Mic EIN 22Hz-22kHz -126dB 150 ohm source Residual noise Mix 1 -94dBu Booth -101dBu X:FX -92dBu Rec -95dBu Mix noise Mix 1 -80dBu (-84dB S/N) Booth -84dBu (-82dB S/N) X:FX -88dBu (-84dB S/N) Rec -90dBu Channel meters Peak reading 9 LED -20dB to +10dB Main meters Peak reading 9 LED -20dB to +10dB Mic EQ 2-Band +/-12dB Channel EQ 3-Band +6dB / total kill Channel fader 60mm stereo VCA, < -90dB shutoff uploads/Management/ xone42-guide.pdf