Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Osiris user guide UpRev LLC Osiris User Guide Osiris User Guide Page of CUpRev LLC Osiris User Guide Contents - Software Installation - Preparation and Precautions before ashing an ECU - Re ashing an ECU with Osiris Re asher - Using the UpRev map switchin

UpRev LLC Osiris User Guide Osiris User Guide Page of CUpRev LLC Osiris User Guide Contents - Software Installation - Preparation and Precautions before ashing an ECU - Re ashing an ECU with Osiris Re asher - Using the UpRev map switching feature not available on a limited number of ROMs - eTune update datalogging - Returning an ECU to stock - Recovering an ECU from a partial ash - Cable Manager - Navigating Osiris ROM editor - Real Time Tuning with the ROM Editor - Map tracing and data logging with the ROM editor - Using Osiris to dump a ROM from an unsupported ECU - ECU Bench Harness Pinouts for use with UpRev bench harness Page of CUpRev LLC Osiris User Guide - Software Installation NOTE Run the software installer BEFORE you connect your UpRev interface cable to a USB port Start by going to www UpRev com and then clicking on the link for the ??Support ? section Download the installer for the system that you purchased under ??Product Related Downloads ? on the right side of the screen You can always get the latest software updates by running the UpRev software updater program from the start menu shortcut NOTE Pro Tuners should download the installer from the pro download area Contact UpRev with a user name and password to get a log in account setup if you don ? t have one already It is recommended that pro tuners run the pro software updater before any tuning session and only download the ROMs for the vehicle you ? re planning to work on It will take a LONG time to download all the ROM ?les and the hashing process for all those ROMs will slow down the updater in the future - Preparation and Precautions before ashing an ECU Re ashing ECU ash memory can be very tricky Although UpRev has gone to great lengths to test the software for robustness there is always the possibility that something could go wrong Be aware of your location while ashing your ECU It is highly recommended that you NEVER ash your ECU in a place where you could get stranded if the ash fails The most common cause of an ECU ash failure occurs if there is a loss of power during the ashing process Verify that you have a ??healthy ? vehicle battery If your vehicle battery dies after leaving your headlights on for minutes DO NOT attempt to ash your ECU NEVER shut o ? the ignition while a ash is in progress - Turn o ? all electrical loads that can be shut o ? or easily disconnected will reduce the chance of draining the vehicle ? s battery charge - All electrical loads must remain o ? or disconnected for the duration of the re ash process - Ensure that your PC Laptop has adequate battery life and or power supply to for the duration of the ashing process - Ensure that the UpRev