Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Cc3300 user guide CC SimpleLink Wi-Fi and IoTSolution With MCU LaunchPad Getting StartedGuide User 's Guide Literature Number SWRU A June ??Revised June Contents Introduction Prerequisites Getting Started Download andInstall Software Configure Board Insta

CC SimpleLink Wi-Fi and IoTSolution With MCU LaunchPad Getting StartedGuide User 's Guide Literature Number SWRU A June ??Revised June Contents Introduction Prerequisites Getting Started Download andInstall Software Configure Board InstallUSBDriver Compile Download andDebug Option Code Composer Studio CCS Option IAR Workbench Option GCC Summary Acronyms Used Revision History Table ofContents SWRU A ??June ??Revised June Submit Documentation Feedback Copyright ? Texas Instruments Incorporated www ti com List ofFigures Jumpers onthe CC -LAUNCHXL Windows DeviceManager Update DriverSoftware Browse forDriver Software USBSerial Port Device Manager CodeComposer Studiov Setup CCSAppCenter SelectCCSProjects toImport SelectCCSProjects toImport Properties forti rtos config Selectsimplelink Project Editing main c TargetConfigurations ImportTarget Configuration SetasDefault Debugwlan station IAREmbedded Workbench IDE Opensimplelink eww Rebuild thesimplelink Project Editing main c SelectTIStellaris Driver DebugIcon Cygwin Setup Cygwin Terminal Cygwin Terminal Running theMake Command Running theMake Install Command Editing main c Makefile Command OutputScreen Debugging wlan station SWRU A ??June ??Revised June List ofFigures Submit Documentation Feedback Copyright ? Texas Instruments Incorporated User 's Guide SWRU A ??June ??Revised June CC SimpleLink Wi-Fi and IoTSolution WithMCU LaunchPad Getting StartedGuide This guide isintended toassist usersinthe initial setup anddemonstration ofthe Getting Startedwith WLAN Station application Theguide explains howtoinstall anIntegrated Development Environment IDE andthen compile download anddebug Getting StartedwithWLAN Station Introduction Prerequisites The user should havethefollowing items ? One CC -LAUNCHXL ? An b g n GHz Wireless AccessPoint AP ? Acomputer runningtheMicrosoft Windows or XP operating systems SimpleLink LaunchPadaretrademarks ofTexas Instruments Wi-Fi isaregistered trademark ofWiFi Alliance CC SimpleLink Wi-Fi and IoTSolution WithMCU LaunchPad SWRU A ??June ??Revised June Getting StartedGuide Submit Documentation Feedback Copyright ? Texas Instruments Incorporated www ti com GettingStarted Getting Started Download andInstall Software Download andinstall thefollowing software ? CC SDKpackage ?? This guide assumes theuse ofthe default installation folderC TI CC SDK Configure Board The jumpers onthe CC -LAUNCHXL shouldbeconnected asshown inFigure It may benecessary to move ajumper fromP -VCC toSOP Figure Jumpers onthe CC -LAUNCHXL Install USBDriver Connect theCC -LAUNCHXL tothe PCusing theprovided micro-USB cable Open theWindows DeviceManager byselecting StartMenu Control Panel Device Manager The CC -LAUNCHXL willappear astwo instances of ??USB - JTAG SWD ? under thecategory Other Devices asshown inFigure For both ofthese instances thedriver software willneed tobe updated SWRU A ??June ??Revised June CC SimpleLink Wi-Fi and IoTSolution WithMCU LaunchPad Getting StartedGuide Submit Documentation Feedback Copyright ? Texas Instruments Incorporated Getting Started www ti com Figure Windows DeviceManager Right clickonthe first instance of ??USB - JTAG SWD ? and select ??Update DriverSoftware ? ? Select ??Browse mycomputer fordriver software ? Figure Update DriverSoftware Fill the search pathasC TI CC SDK cc -sdk ools tdi and press next There isno need to restart thePC CC SimpleLink Wi-Fi and IoTSolution WithMCU LaunchPad SWRU A ??June ??Revised June Getting StartedGuide Submit Documentation Feedback Copyright ? Texas Instruments Incorporated www ti com GettingStarted Figure Browse forDriver Software Repeat theabove threesteps forthe other instance of USB - JTAG SWD Repeat thesame stepsforthe instance of ??USB Serial Port ? that should haveappeared asshown in Figure Figure USB Serial Port The CC -LAUNCHXL willnow bevisible