Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Table - U3 - Year of Acceptable Edition of Referenced Standards in This Divisio

Table - U3 - Year of Acceptable Edition of Referenced Standards in This Division Mandatory Appendix 43 - Establishing Governing Code Editions And Cases For Pressure Vessels And Parts UG-20(f) - Check for Impact Test Requirments. UCS-66 - Determination of Coldest Allowable Minimum Design Metal Temperature (MDMT). Figure UG 66.2 - Diagram of UCS-66 Rules for Determining Lowest Minimum Design Metal Temperature - (MDMT) Without Impact Testing UG-22 - Loadings. UG-25 - Corrosion. UG-25(f) - Openings for Drain UG-27 - Thickness of Shell under Internal Pressure. UG-16(b)(4) - The minimum thickness of shells and heads used in compressed air service, steam service & water service. UG-32 - UG-16(b)(4) - The minimum thickness of shells and heads used in compressed air service, steam service & water service. Table UG-33.1 Values of Spherical Radius Factor Ko for Ellipsoidal Head With Pressure on Convex Side. UG-36 - Openings in Pressure Vessels. UG-36(b) - Size of Openings UG-36(c) 3 (a) - Strength and Design of Finished Openings (Reinforcement Check). UG-37 - Reinforcement Required for Opening in Shell and Formed Heads. Figure UG-37.1 - Nomenclature and Formulas for Reinforced Openings UG-27 - Required Thickness of Shell during Internal Pressure UG-28 - Required Thickness of Shell during External Pressure Appendix 1-1 - Required Thickness of Nozzle during Internal Pressure UG-40 - Limits of Reinforcement. UG-44 - Flanges and Pipe Fittings App. 1-1 (a) - Thickness of Cylinderical and Spherical Shells UG-16(b)(4) - The minimum thickness of shells and heads used in compressed air service, steam service & water service. UG-31(c)(2) - Tubes and pipes When used as Tubes and Shells. UG-45 - Nozzle Neck Thickness App. 1-1 (a) - Thickness of Cylinderical and Spherical Shells UG-16(b)(4) - The minimum thickness of shells and heads used in compressed air service, steam service & water service. Table UG-45 - Nozzle Minimum Thickness Requirements UG-46 - Inspection Opening UG-46 (f)(3) - Vessels that require access or inspection openings UG-99 - Standard Hydrostatic Test UCS-56 - Requirements of Post Weld Heat Treatment. Table UCS-56.1 - Postweld Heat Treatment Requirements for Carbon and Low Alloy Steels - P-No. 1 UCS-79 - Forming Pressure Parts UG-79 - Forming Pressure Parts Table UG-79-1 - Equations for Calculating Forming Strains UW-2 - Service Restrictions UW-11 - Radiographic and Ultrasonic Examination UW-12 - Join Efficiencies UW-16 - Minimum Requirements For Attachment welds at opening. UW-51 - Radiographic Examination of Welded joints UW-52 - Spot Examination Welded Joints. Guide For ASME AUDIT - 2018 Formed Heads, And Sections, Pressure on Concave Side. uploads/s1/ guide-for-asme-audit-2018-table-u3-mandatory-appendix-43-ug-20-f.pdf