Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Copyright © 2008 Operation Technology, Inc. All rights reserved. Certain names

Copyright © 2008 Operation Technology, Inc. All rights reserved. Certain names and/or logos used in this document may constitute trademarks, service marks, or trade names of Operation Technology, Inc. or other entities. ETAP 6.0.0 April 2008 Installation Guide Microsoft Windows XP, Vista and 2003 Server Access Database Operation Technology, Inc. www.etap.com Telephone: (949) 462-0400 Fax: (949) 462-0200 E-mail: support@etap.com Installation Guide System Requirements Copyright © 2008 Operation Technology, Inc. Page 2 1.1 System Requirements 1.1.1 Operating System • Microsoft® Windows Vista • Microsoft® Windows® XP (Service Pack 2) Professional or Home Edition • Microsoft® Server 2003 (Service Pack 2), Microsoft Server 2003 R2 (Service Pack 2) 1.1.2 Other Software Requirements • Internet Explorer 5.01 or higher (or minimum version level as specified by the Operating System in use) • Microsoft® .NET Framework v1.1, Service pack 1 • Microsoft® .NET Framework v2.0, Service pack 1 1.1.3 PC Configuration Requirements • Parallel port, USB port or serial port (for stand-alone licensing only) • CD ROM or DVD Drive • 5 to 80 GB hard disk space (based on project size, number of buses) • 19" monitors recommended (dual monitors highly recommended) • Minimum display resolution – 1024X768 1.1.4 Recommended Hardware Requirements 500 Bus Projects • Intel Pentium IV – 2.0 GHz or equivalent (or dual/quad core- E6600), or better • 1 GB of RAM 2000 Bus Projects • Intel Pentium IV – 3.2 GHz with Hyper-Threading Technology (or dual/quad core - E6700), or better with high speed bus (or equivalent) • 2GB of RAM (high-speed) 10000 Bus Projects and Higher • Intel Xeon – 3.2 GHz with Hyper-Threading (or dual/quad core – X6800), or better with high speed system bus or AMD equivalent • 2 to 4 GB RAM - (high-speed) Installation Guide ETAP 6.0.0 Installation Copyright © 2008 Operation Technology, Inc. Page 3 1.2 ETAP 6.0.0 Installation This section describes the installation procedure for Windows XP/Vista and Windows Server 2003, of ETAP 6.0.0 using a Microsoft Access, SQL Server, or Oracle database. ETAP provides all the necessary tools to build and maintain the Microsoft Access databases used for your ETAP projects. Other database formats such as Microsoft SQL Server and Oracle require a separate license from the appropriate software developer/distributor. 1.2.1 Uninstalling Previous Versions of ETAP The ETAP 6.0.0 installation can coexist with earlier releases of ETAP and it is not necessary to remove older versions of ETAP to run the latest version. If you would like to uninstall earlier versions of ETAP go to the Control Panel and select Add or Remove Programs. Then select and uninstall any earlier ETAP installations. Any user-created files, as well as the ETAPS.INI file and the ETAPLIBX.LIB file (where X is 2, 3, 4, or 5 depending on the version) will not be removed by the uninstall procedure. ETAP Setup uses the uninstaller of the previous versions to uninstall them. Installation Guide ETAP 6.0.0 Installation Copyright © 2008 Operation Technology, Inc. Page 4 1.2.2 Installing ETAP The installation program installs ETAP and all of its components including libraries, example and help files. It also installs the ETAP License Manager since all stand-alone and network keys use this service to provide authorization for ETAP 6.0.0. In this installation procedure, your CD-ROM drive is designated as the D: drive. If this is not the case, replace the letter D with the correct designation of your CD-ROM drive. The same installation procedure is used to install ETAP regardless of the licensing method (stand-alone system or network). 1. To install ETAP, you must have administrative access to your computer. For Windows Vista Operating Systems, in addition to the administrative access we recommend to turn the User Account Control (UAC) off during this installation. You can do so by going to the Control Panel\User Accounts and Family Safety\User Accounts\Turn User Account Control ON or OFF and uncheck the “Use User Account Control (UAC) to help protect your computer” option. The Firewall must be turned off as well. 2. Close all applications and insert the ETAP CD into your CD-ROM drive. 3. For Windows Vista Operation Systems, the installer will start up and present the following screen. Select the Run ETAPINSTALLER.exe option. 4. The ETAP Installer Program will then appear. In the Installations section, select the “ETAP 6.0 & License Manager” option to install ETAP and/or select the “License Manager” option to install the License Manager only. For the Stand-Alone licenses “ETAP 6.0 & License Manager” and ETAP key reside on the same PC. For the Network licenses “ETAP 6.0 & License Manager” shall be installed on the client machines and the ETAP License Manager shall be installed on a PC designated as the License Manager Server. In this configuration the ETAP key will be located at the License Manager Server. Installation Guide ETAP 6.0.0 Installation Copyright © 2008 Operation Technology, Inc. Page 5 5. Click Next on the Welcome screen to continue. Installation Guide ETAP 6.0.0 Installation Copyright © 2008 Operation Technology, Inc. Page 6 6. The installation and use of ETAP is governed by the terms and conditions of the ETAP License Grant and Agreement. These terms must be accepted before the installation can continue. Click Next. 7. The Information screen displays hardware and software requirements as well as other useful information. Click Next to continue with the installation. Installation Guide ETAP 6.0.0 Installation Copyright © 2008 Operation Technology, Inc. Page 7 8. Setup requires the name of a destination folder on your hard drive where you would like the ETAP application to be installed. The default destination folder is C:\ETAP 600. To install the program in a different location, click Browse and select or type a new destination folder. Click Next. The following is an example of typical folders created by ETAP: Installation Guide ETAP 6.0.0 Installation Copyright © 2008 Operation Technology, Inc. Page 8 9. The Start Copying Files screen provides the opportunity to verify the setup information. If the setup information is correct, click Next to continue the installation. 10. The installer displays the Setup Status screen and starts copying files to your installation of ETAP. The installer also adds an ETAP shortcut to the program folder. By default, the Setup program will create a program folder named ETAP 600. ETAP 6.0.0 requires installation of Microsoft .NET Framework 1.1, SP1 and Microsoft .NET Framework 2.0, SP1. If these installations are not available on your operating system, ETAP proceeds with installing them. Billboards will be shown during the file transfer period. These billboards highlight some of the latest features and technologies of ETAP. 11. The installation program then continues with installing the drivers for the USB-1600 keys and the following message will appear. Installation Guide ETAP 6.0.0 Installation Copyright © 2008 Operation Technology, Inc. Page 9 For Microsoft Vista Operating Systems, the Windows Security screen appears. Select the “Install this driver software anyway” option. ETAP then installs the USB-1410 key drivers. 12. When the installation is complete, the installer displays the ETAP 6.0.0 Installation Completed screen. You can check the “Launch ETAP 6.0.0” option and click Finish to automatically run ETAP. If you choose not to run ETAP automatically, leave the box unchecked. 13. Click Finish. Installation Guide ETAP 6.0.0 Installation Copyright © 2008 Operation Technology, Inc. Page 10 1.2.3 Installing the ETAP Library File If the installation folder chosen during the ETAP installation contains an ETAP library with the name ETAPLIB600.LIB, the installation program will preserve the existing ETAP library. The installation program renames the existing ETAP library to OLDETAP600.LIB before installing the new library ETAPLIB600.LIB. If an OLDETAP600.LIB already exists on the target computer, the installation program directs you to make a backup copy of the old file or move the old file into a different subfolder. Otherwise, the installation program will overwrite the current OLDETAP600.LIB with a copy of the existing ETAPLIB600.LIB. 1.2.4 Registering Data Source Name The installation program automatically sets up and registers the ODBC Data Source Names (DSNs) otiaccess and otireport. Three additional DSNs, otisql and otioracle, otioracle2 (required for reporting), can be added by the user to support SQL and Oracle databases respectively. Installation Guide ETAP 6.0.0 Installation Copyright © 2008 Operation Technology, Inc. Page 11 1.2.5 Completing the ETAP Installation When the ETAP installation is completed, an ETAP program shortcut is automatically placed on your desktop. The Setup program also creates an ETAP program shortcut in the Start menu under All Programs. Desktop Shortcut Start Menu Shortcut Installation Guide ETAP License Wizard Copyright © 2008 Operation Technology, Inc. Page 12 1.3 ETAP License Wizard After the complete installation, launch ETAP using the ETAP shortcut on your desktop or go to the Start menu and select All Programs, ETAP 6.0.0. When ETAP 6.0.0 is launched for the first time, it may generate the ETAP License Wizard. The ETAP License Wizard allows you to setup the location of the ETAP licenses. This Wizard was introduced in ETAP 5.5.0. For previous license setups refer to their appropriate documents. 1. Upon launching ETAP, the ETAP License Wizard prompts you with the ETAP uploads/s3/ installation-guide 30 .pdf