Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

QNX ® Software Development Platform 6.5.0 Service Pack 1 Installation Guide For

QNX ® Software Development Platform 6.5.0 Service Pack 1 Installation Guide For Windows®, Linux®, and QNX® Neutrino® hosts © 2012, QNX Software Systems Limited © 2005–2012, QNX Software Systems Limited. All rights reserved. QNX Software Systems Limited 1001 Farrar Road Kanata, Ontario Canada K2K 0B3 Voice: +1 613 591-0931 Fax: +1 613 591-3579 Email: info@qnx.com Web: http://www.qnx.com/ Electronic edition published 2012. QNX, Momentics, Neutrino, Aviage, Photon, Photon microGUI, and Foundry27 are trademarks of QNX Software Systems Limited, which are registered trademarks and/or used in certain jurisdictions. All other trademarks belong to their respective owners. Contents About This Guide v What’s in this guide? vii Typographical conventions vii Before you start vii Getting started with the documentation viii Technical support ix QNX Neutrino RTOS Hosts 1 1 Before you start 3 System requirements 3 BIOS settings 4 Installing QNX SDP 6.5.0 SP1 4 Errors while booting 5 Activating QNX SDP 5 Activating automatically 5 Activating manually 6 Commercializing your evaluation software 6 Uninstalling QNX SDP 6.5.0 and SP1 7 Determining your base directory 7 Microsoft Windows Hosts 9 2 Before you start 11 System requirements 11 Installing QNX SDP 6.5.0 SP1 12 Activating QNX SDP 12 Activating automatically 13 Activating manually 13 Commercializing your evaluation software 14 Uninstalling QNX SDP 6.5.0 and SP1 14 Determining your base directory 16 Linux Hosts 17 3 Before you start 19 June 25, 2012 Contents iii © 2012, QNX Software Systems Limited System requirements 19 Installing QNX SDP 6.5.0 SP1 20 Activating QNX SDP 20 Activating automatically 21 Activating manually 21 Commercializing your evaluation software 21 Uninstalling QNX SDP 6.5.0 and SP1 22 Determining your base directory 23 iv Contents June 25, 2012 About This Guide June 25, 2012 About This Guide v © 2012, QNX Software Systems Limited Before you start What’s in this guide? Thank you for choosing the QNX Software Development Platform version 6.5.0. This guide tells you how to install QNX SDP 6.5.0 Service Pack 1 from a DVD. Please read this preface for information that applies to all host OSs, and then refer to the chapter for your speciﬁc OS (QNX Neutrino, Microsoft Windows, or Linux). Typographical conventions Throughout this manual, we use certain typographical conventions to distinguish technical terms. In general, the conventions we use conform to those found in IEEE POSIX publications. The following table summarizes our conventions: Reference Example Commands make Environment variables PATH File and pathnames /dev/null Keyboard keys Enter Variable names stdin User-interface components Cancel We use an arrow (→) in directions for accessing menu items, like this: You’ll ﬁnd the Other... menu item under Perspective→Show View. We use notes and cautions to highlight important messages: Notes point out something important or useful. CAUTION: Cautions tell you about commands or procedures that may have unwanted or undesirable side effects. ! Before you start Before you install this software, please note the following: • The DVD includes QNX SDP SP1 for all host OSs for creating software for all supported targets. • You must have already installed QNX SDP 6.5.0. • It isn’t possible to uninstall just QNX SDP 6.5.0 SP1; if you uninstall it, you’ll completely uninstall QNX SDP 6.5.0. June 25, 2012 About This Guide vii Getting started with the documentation © 2012, QNX Software Systems Limited • On Linux and Windows hosts, QNX SDP includes the QNX Momentics Tool Suite, which you can use to develop applications to run on the QNX Neutrino RTOS on a separate target system. • QNX SDP for self-hosted QNX Neutrino systems includes the QNX Neutrino RTOS and the QNX Momentics Tool Suite. • QNX SDP includes everything you need to build for all supported target platforms (ARM, MIPS, PowerPC, SH-4, and x86). There are also special versions of QNX SDP for x86 targets only. • Don’t install the x86-only version of 6.5.0 SP1 on the full version of 6.5.0, or the full version of SP1 on the x86-only version of 6.5.0, or else you’ll end up with an inconsistent set of software. • We post CRC and MD5 checksums with the packages in the Download area on our website. If you download a CD or DVD image or an installer from our website, make sure that its checksum matches that given on the website. On Unix-style OSs (e.g. QNX Neutrino, Linux), you can use the cksum utility to calculate the CRC checksum. Microsoft doesn’t support such utilities on Windows, but they’re available from third parties. • QNX SDP 6.5.0 can coexist with QNX SDP 6.4.0, 6.4.1, and QNX Momentics 6.3, but if you want 6.5.0 to replace 6.4.1, 6.4.0, or 6.3, you must uninstall the older versions and any updates to them before installing 6.5.0. Coexistence with QNX Momentics 6.2.1 is supported only on Windows hosts (we didn’t support Linux hosts in 6.2.1). • For information about new features and known issues in QNX SDP, see the release notes. The online documentation includes a copy, but for for the most up-to-date version, go to our website, www.qnx.com, log into your myQNX account, and then go to Downloads→QNX Software Development Platform 6.5.x. • For information about using BSPs with QNX SDP 6.5.0, see the BSP Migration Guide in the BSPs and Drivers project on Foundry27. Getting started with the documentation After you’ve installed QNX SDP, you’ll ﬁnd an extensive set of HTML documentation: • On Linux and Windows development hosts, you can read it in the Integrated Development Environment’s help system. On Linux, use the qde command to start the IDE; on Windows, use the desktop icon. • On self-hosted QNX Neutrino systems, you can read it in the Photon helpviewer, or you can use a web browser to display: ${QNX_TARGET}/usr/help/product/momentics/bookset.html viii About This Guide June 25, 2012 © 2012, QNX Software Systems Limited Technical support The “roadmap” page contains links to the various HTML booksets that accompany the OS. We recommend that you start with Welcome to the QNX Software Development Platform for an overview of QNX SDP. Next, see 10 Steps to Developing a QNX Program: Quickstart Guide for a short tutorial that will help you get started, and then refer to the other documents (System Architecture, QNX Neutrino Programmer’s Guide, Library Reference, Utilities Reference, and so on). You can install and work with multiple versions of QNX Neutrino. Whether you’re using the command line or the IDE, you can choose which version of the OS to build programs for. For more information, see the IDE User’s Guide or the QNX Neutrino Programmer’s Guide. Technical support To obtain technical support for any QNX product, visit the Support area on our website (www.qnx.com). You’ll ﬁnd a wide range of support options, including community forums. For questions about installing and using QNX SDP, see the QNX Momentics Getting Started forum on our Foundry27 site, http://community.qnx.com. There are other forums for speciﬁc topics, including the QNX Neutrino RTOS, development tools, networking, Board Support Packages, and so on. June 25, 2012 About This Guide ix Chapter 1 QNX Neutrino RTOS Hosts In this chapter. . . Before you start 3 System requirements 3 BIOS settings 4 Installing QNX SDP 6.5.0 SP1 4 Errors while booting 5 Activating QNX SDP 5 Commercializing your evaluation software 6 Uninstalling QNX SDP 6.5.0 and SP1 7 Determining your base directory 7 June 25, 2012 Chapter 1 • QNX Neutrino RTOS Hosts 1 © 2012, QNX Software Systems Limited System requirements If you’ve already installed an evaluation version of QNX SDP 6.5.0, and you’ve purchased and received a commercial QNX license or you’ve received an evaluation extension license, please go to “Commercializing your evaluation software,” below. Before you start • For QNX Neutrino self-hosted development, it’s possible to have more than one version of QNX SDP installed on your computer at the same time, by having them in separate partitions. If you want to retain an earlier released version of QNX SDP or QNX Momentics, install 6.5.0 in a new partition. When you boot, you’re asked to choose the partition by its number. If you’re then prompted to choose from multiple .diskroot ﬁles, choose the one that corresponds to the partition that you already chose. • In text mode, we support only the US keyboard layout. • If you install QNX Neutrino in a partition on a Windows machine and later use Windows software to create another partition, you’ll lose your QNX Neutrino partition. • The Neutrino boot process can dynamically add block I/O (i.e. disk) drivers, letting you boot on systems with newer controllers. The mechanism is simple and not proprietary to QNX Software Systems, so third parties can offer enhanced block drivers without any intervention on our part. For more information, see “Updating disk drivers” in the Controlling How Neutrino Starts chapter of the QNX Neutrino User’s Guide. System requirements Minimum Recommended Processor 2 GHz or more Intel Pentium 4 2 GHz or more Intel Pentium 4 RAM 512 MB 1 GB Disk space 3.0 GB 3.5 GB Monitor 1024×768 1280×1024 June 25, 2012 Chapter 1 • QNX Neutrino RTOS Hosts 3 BIOS uploads/Geographie/ installation-guide 52 .pdf