Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

KIP 2300 User Guide Version QA.1 1 We highly appreciate your purchasing our KIP

KIP 2300 User Guide Version QA.1 1 We highly appreciate your purchasing our KIP 2300 Image Scanner. This User's Manual contains functional and operational explanation for KIP 2300 Image Scanner. Read this User's Manual carefully before use in order to understand the KIP 2300 Image Scanner completely and to use more efficiently. Keep this User's Manual for future reference. 1. For U.S.A. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. For Europe This equipment complies with the requirements in Pub.22 of CISPR Rules for a Class B computing device. Operation of this equipment in a residential area may cause unacceptable interference to radio and TV reception requiring the operator to take whatever steps are necessary to correct the interference. Do not install Machine around electronics equipment or precision instruments. It may be influenced by electrical reason or vibration while operation. If Machine is installed near electronics equipment, such as TV or radio, interference to equipment, such as noise or flickering may be occurred. Use separate power line and install Machine as far as such equipment. The International ENERGY STAR ® Office Equipment Program is an international program that promotes energy saving through the penetration of energy efficient computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos are uniform among participating nations. The symbol shown indicates that this product conforms to Directive 2002/96/EC of the European Parliament and the council of 27 January 2003 on waste electrical and electronic equipment (WEEE) and does not apply to countries outside of EU. As an ENERGY STAR ® Partner, Katsuragawa Electric Co., Ltd. has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. The symbol shown indicates that this product conforms to SJ/T11364-2006 of People’s Republic of China Electronic Industry Standard and does not apply to countries outside of People’s Republic of China. The symbol shown indicates that this product conforms to GB 18455-2001 11364-2006 of National Standard of the People’s Republic of China and does not apply to countries outside of People’s Republic of China. 2 Following warnings are very important to use this equipment safely and to prevent the operator from danger and his/her property from being damaged. Hazardous or damage degree is classified and shown as follows when this machine is erroneously used ignoring this USER'S MANUAL. WARNING This caution mark denotes that the failure to follow given instructions in handling the machine could result in a death or serious injury. CAUTION This caution mark denotes that the failure to follow given instructions in handling the machine could result in an injury or physical damage only. This symbol signifies what must not be done. This symbol signifies General Mandatory Action. WARNING FOR THE SAFETY (OBSERVE THESE WARNING) 3 WARNING 1. Power source should be rated from 100V - 240V +6/-10%, 6A or higher, and 50/60Hz. 2. It is preferable that the used power circuit is provided with a dedicated breaker. 3. Install the machine as close as possible to the outlet. 4. When you wish to move the machine to another place, make sure to ask your service engineer. Connect the scanner and Ground with each other surely with the grounding wire. Otherwise, it is dangerous for you if you receive an electric shock or at the time of lightning. If the outlet does not have a Grounding Terminal or if it is impossible to connect, call the vendor or service professional for the installation. Do not disassemble or tamper the machine. Otherwise, it may cause a fire or receiving an electric shock. 1. Do not use a multi-wiring connector that might raise the temperature of the outlet abnormally and cause a fire. 2. Do not put anything heavy on the power cord. It may cause a fire or receiving an electric shock. 3. Do not step on the power cord, and do not damage or process it. It may also cause a fire or receiving an electric shock. 4. Do not tie the power cord or make a knot on it. It may also cause a fire or receiving an electric shock. 5. Do not put a flower vase, a flowerpot or a water-filled glass on the top of the machine. If the water spilt out, it may also cause a fire or receiving an electric shock. 1. If the machine generates abnormal smell or noise, turn it off and then disconnect the power plug from the outlet necessarily. 2. Do not handle the power plug with the wet hand positively. It may cause to receive an electric shock. 3. Insert the power plug into the outlet completely. If the power plug is not inserted completely, it may cause a fire. 4. Use only the attached power cord. Make sure to catch the Plug when you unplug the machine. Otherwise, you may break the cord and may result in a fire or receiving an electric shock. 4 CAUTION Do not install the machine at the following places. 1. Humidified or dusty place. 2. Unstable floor. (When the machine comes down, it may cause the injury.) 1. Unplug the machine before you move it to another place. Otherwise, the power cord may be damaged and may result in a fire or receiving an electric shock. 2. If nobody operates the scanner in the night time, make sure to turn it off for the safety. 3. If nobody operates the machine for a long time during consecutive holidays, make sure to turn it off for the safety. 4. Nothing should be put near the power plug so as to disconnect it quickly anytime. Be careful not to catch your hand between Upper Unit and Main Unit when you close the Upper Unit. LED Safety (Safety of LED Products) “Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure” As the LED on the Light Source PCBs (PW12130 & PW12131) are Class 2 LED singularly, it is not allowed for using it with disassembling or converting. Classification of LED product : - CLASS 1 LED PRODUCT IEC 60825-1:2001 EN 60825-1:1994 + A2:2001 + A1:2002 - Maximum class of the embedded LED : CLASS 2 (WHITE LED, Maximum power : 4.0mW) 1-1 1. 1 Installation Requirements The following conditions have to be satisfied when installing the KIP2300 Scanner. 1. Satisfy the following input power condition. Voltage 100 - 240V +6%/-10% Current 6A or higher Frequency 50 or 60Hz. KIP2300 can be connected to the outlet simply so far as the voltage is within 100 - 240V. (+6% and -10% are acceptable) 2. Connect the power plug to the grounded outlet. 3. To completely disconnect the equipment from the power source, please draw the power plug from the outlet. The outlet must be easily accessible near the equipment. 4. The temperature must be within 10 through 32 degrees centigrade, and the humidity must be within 20 through 80%. 5. Keep the equipment away from fire, dust and direct sunlight. If it is impossible to avoid the direct sunlight, please pull the curtain to intercept the sunlight. 7. Keep enough space around the machine as follows. (The following values are the least requirements. Please keep a wider space if possible.) 1600mm 600mm 600mm 1000mm (2000mm is required if the original is thicker than 1.2mm) (Front side) (Rear side) KIP2300 1-2 Machine Noise Information Ordinance 3. GSGV January 18, 1991 : The maximum sound pressure level is equal or less than 70dB (A) according to ISO 7779. Reference NOTE 1. For U.S.A. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. For Europe This equipment complies with the requirements in Pub.22 of CISPR Rules for a Class B computing device. Operation of this equipment in a residential area may cause unacceptable interference to radio and TV reception requiring the operator to take whatever steps are necessary to correct the interference. Do not install Machine around electronics equipment or precision instruments. It may be influenced by electrical reason or vibration while operation. If Machine is installed near electronics equipment, such as TV or radio, interference to equipment, such as noise or flickering may be occurred. Use separate power line and install Machine as far as such equipment. 1-3 1. 2 Specifications Model KIP2300 Image Scanner Type Desktop scanner Reading sensor 3 CCD Reduction Optical System (3 CCD of uploads/Industriel/ 2300-userguide.pdf