Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Koida guide Creating a Kolida K T GPS GSM Network Rover Pro ?le and Connecting to a GPS Network Data Correction Service Using MicroSurvey FieldGenius May CCreating a Kolida K T GPS GSM Network Rover Pro ?le Introduction This guide describes how to create

Creating a Kolida K T GPS GSM Network Rover Pro ?le and Connecting to a GPS Network Data Correction Service Using MicroSurvey FieldGenius May CCreating a Kolida K T GPS GSM Network Rover Pro ?le Introduction This guide describes how to create a GPS GSM network rover pro ?le for your Kolida K T GNSS receiver Important Note You only need to create a particular pro ?le once After that FieldGenius will preserve and use this already-created pro ?le You are also welcome to create more pro ?les such as for a UHF radio GPS pro ?le but in this guide we explain how to create a GSM Network GPS pro ?le Current Version This guide was written using FieldGenius Version installed on a Getac PS with Windows Mobile installed If you are using a di ?erent version your screens may look di ?erently than what is displayed in this guide Before you begin Have your Kolida K T Receiver data collector with FieldGenius installed and a SIM card close by You will need them to complete this guide Continued on the following page ? MicroSurvey Software Inc Page of CCreating a Kolida K T GPS GSM Network Rover Pro ?le continued Step Action Turn on your Getac PS Display This starts up the Windows Mobile Operating system Note Don ? t be alarmed if your display is slightly di ?erent from the image on the right We may have set up our display di ?erently to yours Tap on the button From within the context menu Tap on the FieldGenius menu selection Note If you do not see FieldGenius in your menu then you must use File Explorer to go to Programs and ?nd the FieldGenius icon and tap on it The next time you open this Start menu you will see FieldGenius in the list This takes you to the Device ID screen Continued on the following page ? MicroSurvey Software Inc Page of CCreating a Kolida K T GPS GSM Network Rover Pro ?le continued Step Action In the Device ID screen Enter your License Key in the Key ?eld Press the Apply Key button when ?nished Important Note FieldGenius will remember your key therefore you will only have to enter your key once Once a correct key is entered you will not see this screen again Display This takes us to the Project Manager screen after we accept the tip of the day License Keys are provided by the internet registration portal or your dealer Please contact your dealer for information on License Keys and how to register your new software In the Project Manager screen Since this is a new installation we only see the sample project that comes included with FieldGenius We will create a new project Tap on the New Project button This takes us to the Create New Project screen ? MicroSurvey Software Inc Continued on the following page Page of CCreating a Kolida K T GPS GSM Network Rover Pro ?le