Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

EIO0000000067.07 www.schneider-electric.com SoMachine EIO0000000067 04/2012 SoM

EIO0000000067.07 www.schneider-electric.com SoMachine EIO0000000067 04/2012 SoMachine Programming Guide 04/2012 2 EIO0000000067 04/2012 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. If you have any suggestions for improvements or amendments or have found errors in this publication, please notify us. No part of this document may be reproduced in any form or by any means, electronic or mechanical, including photocopying, without express written permission of Schneider Electric. All pertinent state, regional, and local safety regulations must be observed when installing and using this product. For reasons of safety and to help ensure compliance with documented system data, only the manufacturer should perform repairs to components. When devices are used for applications with technical safety requirements, the relevant instructions must be followed. Failure to use Schneider Electric software or approved software with our hardware products may result in injury, harm, or improper operating results. Failure to observe this information can result in injury or equipment damage. © 2012 Schneider Electric. All rights reserved. EIO0000000067 04/2012 3 Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 About the Book. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Part I Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Chapter 1 Introduction to Programming . . . . . . . . . . . . . . . . . . . . . 15 Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Chapter 2 Managing Projects with SoMachine . . . . . . . . . . . . . . . . 17 Main Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Part II Managing Your Project . . . . . . . . . . . . . . . . . . . . . . . 19 Chapter 3 Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 3.1 General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 General Description of the Main Selection Screen . . . . . . . . . . . . . . . . . . 23 Accessing General Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 3.2 Show Existing Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Show Existing Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 3.3 Create New Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Create New Machine Sub-Tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Start with Standard Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Start with Empty Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Start with TVD Architecture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Start with Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Start with Existing Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 3.4 Machine Workflow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Machine Workflow Sub-Tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Commission Machine - Start with Project . . . . . . . . . . . . . . . . . . . . . . . . . 45 Commission Machine - Upload Project from Device. . . . . . . . . . . . . . . . . 47 Update Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 3.5 Learning Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Learning Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Chapter 4 Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 General Overview of the Properties Tab. . . . . . . . . . . . . . . . . . . . . . . . . . 56 Description of the General Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Description of the Description Task. . . . . . . . . . . . . . . . . . . . . . . . . . . . uploads/Industriel/ programming-guide 2 .pdf