Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Prepared by: Confederation of Construction Products and Services (CCPS) Project

Prepared by: Confederation of Construction Products and Services (CCPS) Project Sponsored by: All India Flat Glass Manufacturers Association (AIFGMA) DRAFT FOR COMMENTS AND SUGGESTIONS Guidelines on use of Glass in Buildings © No copying without CCPS permission Part A: Human Safety 13th September, 2007 3 LIST OF STEERING COMMITTEE MEMBERS A steering committee was formed to ensure the integrity of the process and the acceptance of the recommendations of the committee by the industry. Four meetings of steering committee were organized in Delhi, Mumbai and Bangalore. Apart from the meetings the draft was circulated and recommendations of the members of steering committee was accepted by email, courier and post. The role of steering committee was to: 1. Guide and support the secretariat in its functioning 2. Assist and advise and if possible share responsibility in background research, analysis, preparation of draft report 3. Review and confirm the draft report 4. Assist and advise on wider feedback to the draft report. 5. Review and confirm the final report Below is the list of the members of the steering committee: Mr. K.K. Trivedi Secretary General, AIFGMA, Delhi Mr. Deependra Prashad, Architect, Secretary, International Network for Traditional Building, Architecture & Urbanism (INTBAU), Delhi Mr. Kunwar Narayan, Chief Operating Officer, AIS Glass Solutions Ltd., Delhi Mr. Phillip Davies, Director, Dupont China Holding Co., Ltd., China Mr. Sandeep Kashyap, Business Manager - India/ Pak., EI Dupont India Pvt. Ltd., Gurgaon Mr. Sharanjit Singh, Managing Director, GSC Toughened Glass Pvt. Ltd., Greater NOIDA Mr. Paresh Misra HOD - Architectural Division, Gujarat Guardian Ltd., Delhi Mr. N. G. Rao, National Head, Gujarat Guardian Ltd., Delhi Mr. Amit Malhotra, Managing Director, McCoy Silicones Ltd., Delhi Dr. Gerard Savineau, Architectural Applications Manager, Saflex Interlayers, France Mr. Anand Jain, Project Manager, Saint Gobain Ltd., Chennai Mr. Naren Kumar, Manager - Institutional Sales, Saint Gobain Ltd., Chennai Mr. V. B. Sud, Business Manager, Solutia Chemicals India Pvt. Ltd., Delhi Mr. Arun Sharma Managing Director, Trosifol, Delhi Mr. Ashok Menon, Division Head - Construction Market Center, 3M India Ltd., Banglore Mr. N. Gopinath, National Sales Manager, 3M India Ltd., Banglore Mr. A. B. Bhalerao, Director, Garware Polyester Ltd., Aurangabad Mr. Sandeep Chowdhry, Managing Partner, Al Karma, Delhi Mr. Phil Murray, Technical Services Manager, CPFilms - Middle East, Africa, India Mr. R. Subramanian, Director (Operations), Sejal Architectural Glass Ltd., Mumbai Ms. Meeta Zaveri, Director, Gras Impex Pvt. Ltd., Mumbai Mr. Prashant Yadav, Architect, SP Fabricators Pvt. Ltd., Banglore Mr. P Ganesh, Executive Director and Chief Executive Officer, Glass & Glazing Systems (P) Ltd., Kerala Mr. Naveen Keswani, Managing Director, Aluplex India Pvt. Ltd., Mumbai Mr. S. C. Marwah, Vice President, Indo Alusys Industries Ltd., Delhi Mr. Nimish Patel Architect, Abhikram, Ahmedabad Mr. Balbir VermaArchitect, Balbir & Associates, Delhi Mr. Manjunatha Prasad, GM (Projects), Brigade Gateway, Bangalore Mr. L. Venkatesh Architect, C.R Narayanan Rao Architects and Engineers, Chennai Mr. Dhananjay Dhake, Architect, Construction Catalysers Pvt. Ltd., Pune Mr. Vivek Sabherwal, Architect, Interior India, Delhi Mr. K. Nagaraj, Architect, Jurong Consultants (India) Pvt. Ltd., Bangalore Mr. Vijay Dahiya, Architect, Morphogenesis Architect Studio, Delhi Mr. Nalin Sharma, Architect (Ex), Airports Authority of India (AAI), Delhi Mr. S.C. Bhatia, Architect, Ex-Central Public Works Department (CPWD), Delhi Mr. Mayank K. Tilak, Superintending Engineer (TAS)/ CSQ., CPWD, Delhi Mr. V. D. Deewan, Chief Architect, Delhi Development Authority (DDA), Delhi Mr. A. K. Jain, Commissioner Planning, Delhi Development Authority (DDA), Delhi Mr. K.K. MutrejaEngineer-in-Chief, New Delhi Municipal Council (NDMC), Delhi Mr. V. K. Rustogi, General Manager - RE, National Buildings Construction Corporation Ltd. (NBCC), Delhi Mr. A. K. SinghalChief Engineer, Public Works Department (PWD) - Delhi, Delhi Mr. B.L Moolchandani, Chief Engineer 1st, Rajasthan Housing Board, Jaipur Mr., Sudhir Kumar, Addl. Chief Executive Officer, Greater Noida Industrial Development Authority, Uttar Pradesh Mr.L. Mahesh, Asst.General Manager-Planning, Skyline Builders, Cochin Mr. Aprameya Kar, Architect, Unitech Ltd., Gurgaon Mr. Nilabh Nagar, Architect, Architect Hafeez Contractors, Mumbai Mr. Abhijit Ray, Architect, The Indian Institute of Architects, Delhi Mr. Ashok B Lal, Architect, TVB School Of Habitat Studies, Delhi Mr. Ashok Kumar, Architect Scientist - Housing & Planning, CBRI, Roorkee Mr. Subir Saha, Professor School of Planning and Architecture, New Delhi Dr. Leon Jacob Mr. Sthaladipti Saha, Deputy Design Head, Larsen & Toubro Limited | ECC Division,Gurgaon Mr. Suhel, Managing Director, FG Glass, Mumbai Mr. Feroz, Director, FG Glass, Mumbai Yogesh Dutt, Director, Impact Safety Glass Works Deepak Malik, Executive Director A BC Group Mr. G. P. Savlani,CREDAI Mr. Vivek Dubey, Marketing Head, Gold Plus Mr. R. K. Gandhi, Chief Engineer, PWD (B&R), Haryana Mr. Raj Kapoor, Architect, Department of Architecture, PWD (B&R), Haryana Use of Glass in Buildings 4 5 LIST OF SPECIAL INVITEES TO STEERING COMMITTEE MEETINGS During steering committee meetings, which were organized in Delhi, Mumbai and Bangalore, it was decided to involve the professionals from the building industry as special invitees to these meeting, so that wider feedback could be taken. The following members participated in the deliberations as special invitees: 1. Mr. Ravindra Mudugu, Assistant Manager - Projects, Oberoi Constructions, Mumbai 2. Mr. Vivek Kulkarni, Assistant Manager - Projects, Oberoi Constructions, Mumbai 3. Ms. Manisha Thakur, Sr. Engineer - Projects, Oberoi Constructions, Mumbai 4. Mr. G. Naga Varma, AGM - Marketing, HNG 5. Mr. Gaurav Tyagi, Director, Shiv Shakti Float Glass Pvt. Ltd. 6. Mr. Sushil Padwal, Officer Purchase, Kalpataru, Mumbai 7. Mr. Bharat Gawde, Officer Purchase, Kalpataru, Mumbai 8. Mr. Uttaran B. Ray, Director and Architect, Impact Safety Design 9. Mr. Vijay G., Assistant Technical Manager, 3M India Limited 10. Mr. Pradeep Ramesh, Engineer, A. N. Prakash and Consultants 11. Mr. Pankaj Keswani, Managing Director, Alufit 12. Mr. A. C. Kadir Velu, Consulting Engineer 13. Mr. Srinivasan Desikachari, Architect, CREDAI 14. Mr. Giriyappa, Proprietor, Giriyappa and Associates 15. Mr. K R. Singh, Branch Manager, GSC Toughened Glass Private Limitd 16. Mr. Vineet Gupta, Territory Head, Gujarat Guardian Limited 17. Mr. T. Ravindran, Director, Instruct 18. Mr. Madan Lal, Director, Mahaveer Safety Glass 19. Mr. Javed Anwar, Managing Director, Milestone 20. Mr. Gaiwal, Assistant Engineer, Building Proposal Department of M.C.G.M., Municipal Corporation of Greater Mumbai, Mumbai 21. Mr. Ingawale V. D., Executive Engineer, Building Proposal Department of M.C.G.M., Municipal Corporation of Greater Mumbai, Mumbai 22. Mr. Susanta, Engineer, Natraj and Venkat 23. Mr. Raj Dilip, Sr. Architect, Natraj and Venkat 24. Mr. Motta Tarun, Joint Secretary, Practising Engineers and Architecture Town Planner Association (PEATA) 25. Mr. Vasim Sayed, Manager North, S. P. Fabricators 25. Mr. Nanda Kumar, Commercial Department, S. P. Fabricators 26. Mr. Praveen, EDM (South), S. P. Fabricators 27. Mr. Ajit Chnadrashekharan, Manager - Institutional Sales, Saint Gobain Glass 28. Mr. Jaubilant C., Architect, Saint Gobain Glass 29. Mr. Raj Gopal, Architect, Sundaram Architects 30. Mr. Prem, Sr. Vice President, Zak Trade Fairs and Exhibition. This document has been adopted by Confederation of Construction Products and Services (CCPS) and All India Flat Glass Manufacturers Association (AIFGMA) on _______ October, 2007. Since this document is a consensus standard, a steering committee was formed keeping in mind the integrity of the process and the acceptance of the recommendations of the committee by the industry. The document was adopted after the draft was finalized by the steering committee through a series of meetings held throughout India. To cater to the needs of the present building industry, this document has been made keeping in mind the latest International Standards and the building practices. In preparing this standard assistance has been derived from: - IS 2553 (Part 1) : 1990 - Safety Glass - Specification. - IS 2835 : 1987 - Specification for Flat Transparent Sheet Glass (third revision) - IS 875 - Codes for the Wind Loads. (for wind load calculations please refer to annexure 2) - IS: 3548 - 1988 - Code of Practice for Glazing in Buildings - IS: 10439 - 1983 - Code of Practice for Patent Glazing - 16CFR Ch II (1-1-04 Edition) - Part 1201 - Safety Standards for architectural glazing materials. - ANSI Z 97.1 - 1984 (R1994) - Safety Glazing Materials - Used in Buildings - Safety Performance Specifications and Methods of Tests. - AS: 2208:1996 - Safety Glazing Materials in Buildings - AS 1288 - 2006: Glass in Buildings - Selection and Installation. - BS 6206 : Part 4 : 1995 - Specifications for impact performance requirements for flat safety glass and safety plastics for use in buildings - BS 6262, Part 4 - 1994 - Code of Practice for Glazing for Buildings - Safety related to Human Impact - BS 6262: Part 6: 1997 - Code of Practice for Glazing for Buildings: Special Applications - BS 952 - For nominal thickness of glass. - BS 8000: part 7: 1990 - Workmanship on Building Sites - Code of Practice for Glazing - BS 5516-1:2004: Patent Glazing and Sloped Glazing for Buildings - Code of Practice for Design and Installation. - BS 8213: Part 4: 1990 - Windows, Doors and Rooflights: Code of Practice for the Installation of Replacement Windows and Doorsets in Dwellings - BS EN: 12600:2002 - Glass in buildings - Pendulum tests uploads/Ingenierie_Lourd/ good-practice-guide 1 .pdf