Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Omada Controller Upgrade Guide Omada SDN Controller 4.1.5 is a major update to

Omada Controller Upgrade Guide Omada SDN Controller 4.1.5 is a major update to the Omada Controller, representing TP-Link’s work in developing an integrated and efficient network solution covering nearly all modules and functions. TP-Link Team has strived to maintain the commitment to backward compatibility and straight-forward upgrade process. However, given the vast scope of changes in Omada SDN Controller 4.1.5, there are inevitably special considerations to be evaluated and actions to be taken in order to successfully upgrade from your current controller. This guide provides instructions for upgrading your Omada Controller to Release 4.1.5, which maintains your configurations and reduces the overall upgrade downtime. The guide includes the following sections: • Introduction to Omada SDN Controller Solution • Before You Upgrade • Upgrade Your Controller Content Introduction to Omada SDN Controller Solution ......................................................................... 1 Before You Upgrade................................................................................................................................. 1 1 Upgrade Paths and Version Considerations.....................................................................................1 2 Checking Compatibility Matrix. ..............................................................................................................2 3 Feature Updates..........................................................................................................................................2 Features to be configured. ............................................................................................................................2 Adjusted features.............................................................................................................................................3 Upgrade Your Controller. ........................................................................................................................ 4 1 Prepare for Upgrade..................................................................................................................................4 2 Upgrade Procedure....................................................................................................................................4 Upgrade to Omada Software Controller. .................................................................................................4 Upgrade on the Same Computer...............................................................................................................4 Upgrade Across Devices. ..............................................................................................................................7 Upgrade to Omada Hardware Controller (OC200/OC300) .......................................................... 12 Upgrade on the Same Omada Hardware Controller........................................................................ 12 Upgrade to Another Omada Hardware Controller............................................................................ 16 Upgrade to Omada Cloud-Based Controller ..................................................................................... 20 Upgrade from Omada Software Controller......................................................................................... 20 Upgrade from Omada Hardware Controller(OC200/OC300). ....................................................... 21 1 Omada Controller Upgrade Guide Introduction to Omada SDN Controller Solution Omada SDN Controller Solution is designed to provide business-class networking solutions for demanding and high-traffic environments, such as campuses, hotels, malls, and offices. Developed from Omada Controller that can centrally manage wireless access points, Omada SDN Controller acts as the command center of the network and provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points. Omada SDN Controller simplifies managing large-scale networks and offers easy maintenance, ongoing monitoring, and flexible scalability. Tailored to different needs and applications, Omada SDN Controller offers diverse deployment solutions: Omada Software Controller, Omada Hardware Controller, and Omada Cloud-Based Controller. Newly developed Omada Cloud-Based Controller controller is deployed on the Omada Cloud server. With a paid subscription to Omada Cloud Service, you need not install the software on the host or purchase an additional hardware device. Three types of Controller differ in forms, but they serve the same functions with management of networks. Before You Upgrade 1 Upgrade Paths and Version Considerations Regardless of which type of Omada Controller you are using, you can upgrade it to different forms of Omada SDN Controller. 2 Omada Controller Upgrade Guide If you are using a version earlier than Omada Software Controller, Release 3.1.4 (Omada Hardware Controller, Release 1.2.0) you need to first upgrade to one of the releases that are listed above and then follow the upgrade procedure in this guide. 2 Checking Compatibility Matrix Omada SDN Controller can configure and manage only the certain devices with supported firmwares. View the compatibility matrix below to check if your device is compatible with Omada SDN Controller. If the firmware version of your device is lower than the version listed, click the button to download the latest firmware and extra the firmware file(.bin), then follow the instructions to upgrade it. EAP245 V3 2.20.0 Build 20200423 Rel. 36779 and above EAP225 V3 2.20.0 Build 20200422 Rel. 70513 and above EAP115 V4 3.20.0 Build 20200525 Rel.36931 and above EAP110 V4 3.20.0 Build 20200525 Rel. 36899 and above EAP225-Wall V2 1.20.0 Build 20200422 Rel. 70504 and above EAP115-Wall V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Outdoor V1 1.20.0 Build 20200422 Rel. 70543 and above EAP110-Outdoor V3 3.20.0 Build 20200511 Rel. 33388 and above 3 Feature Updates Two levels of functional changes that you should pay attention to when upgrading a controller: features to be configured and adjusted features. ■ Features to be configured These features will require manual configuration. In other words, these are features that have a direct corresponding solution, but for various reasons cannot be automatically upgraded. Wireless Control > Access Control Access Control has been updated to ACL in the Network Security module in Omada SDN Controller 4.1.5. The new function can be applied to specific clients or groups whose traffic passes through the gateway, switches and EAPs. If you want to restore Access Control configurations, go to Settings > Network Security > ACL and configure the EAP ACL rules manually after upgrading. 3 Omada Controller Upgrade Guide Wireless Control > Portal Portal has been improved in Omada SDN Controller 4.1.5, which can take effect on SSIDs and LAN networks. Only one portal is allowed for a single site and supports one authentication type (including No Authentication, Simple Password, Hotspot, External RADIUS Server, and External Portal Server). For Hotspot, you can select one or more authentication modes from Voucher, Local User, SMS, RADIUS, and Facebook. If you want to restore Portal configuration, go to Settings > Authentication and configure Portal manually after upgrading. Wireless Control > Free Authentication Policy Free Authentication Policy has been changed to Authentication-Free Policy as a subordinate function of Portal in Omada SDN Controller 4.1.5, which can allow certain clients to access the internet without Portal authentication. ■ Adjusted features These are features that have been adjusted or replaced by new designs. Wireless Control > Scheduler Wireless Control > Scheduler Association The two modules are adjusted to the Profile module in Omada SDN Controller 4.1.5, which provides a more flexible and practical approach for Time Range customization and association. Insight > Untrusted Rogue APs Insight >Trusted Rogue APs The two modules are adjusted in Omada SDN Controller 4.1.5. Rogue APs Detection can scan all channels to detect all nearby APs by an optimized mechanism, but will not sort the rouge APs into Trusted or Untrusted in the new release, which simplifies the configuration. Site Settings > Log Settings For old versions, you need to set both the sender’s and receiver’s email address to receive system logs, and set Time Mode to determine system logs to be sent at a specific time or time interval. With Mail Server configured on the Controller module, Omada SDN Controller 4.1.5 can send emails for resetting your password, pushing notifications, and delivering the system logs. And the system logs will be automatically emailed to the mailbox bound with the administrator account at a regular interval. Controller Settings > User Account The tiered roles of system administrators have been redefined. The system administrators of the old controller have three types of roles with a descending priority: Administrator (including Root Administrator), Operator, and Observer. Correspondingly, Three roles of the new release are Master Administrator, Administrator, and Viewer. 4 Omada Controller Upgrade Guide Upgrade Your Controller 1 Prepare for Upgrade To successfully upgrade a current controller, ensure that you have performed the following tasks before you upgrade: 1. Download the upgrade bundles and place them in the repository. 2. Read carefully this guide and know the process of upgrading, then plan for an upgrade with minimum downtime. 2 Upgrade Procedure Upgrading is a multistep process and must be performed in the order that is specified in this guide. According to your upgrade target, click the tab below to jump quickly to the corresponding page and select the suitable scheme for your upgrade. Upgrade to Omada Software Controller Upgrade to Omada Hardware Controller (OC200/OC300) Upgrade to Omada Cloud-Based Controller ■ Upgrade on the Same Computer If you want to upgrade to Omada Software Controller 4.1.5 on your current controller host, complete the following procedures required for a successful upgrade: 1. Back up your current controller 2. Uninstall the current controller 3. Install Omada Software Controller 4.1.5 4. Import the backup file of the previous controller 5. Upgrade the devices in Omada SDN Controller 5 Omada Controller Upgrade Guide ▶ Back up your current controller. Step 1 Go to Controller Settings > Backup&Restore. Step 2 Select the length of time in days that data will be backed up in the Retained Data Backup drop- down list. For example, with 7 days selected, the data only in recent 7 days will be backed up. Step 3 Click Backup to save the current configuration and data in the controller as a backup file. ▶ Uninstall the current controller. Step 1 In the search box on the taskbar of the controller host, type Control Panel and select it from the results. Select Programs > Programs and Features. Press and hold (or right-click) on the program you want to remove and select Uninstall. Then follow the directions on the screen. 6 Omada Controller Upgrade Guide Step 2 Click No to completely remove all data of the controller. ▶ Install Omada Software Controller 4.1.5. Step 1 Run the installation file and follow the wizard to install the Omada SDN Controller. The installation file can be downloaded from https://www.tp-link.com/support/download/omada-software- controller/. Step 2 Launch the Omada SDN Controller and follow the step-by-step instructions to complete the Quick Setup. After the wizard is finished, a login screen will appear. Enter the username and password you created uploads/Litterature/ omada-controller-upgrade-guide.pdf