Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Operation guide 1 Operation guide iHeat Combined water and central heating system Important This appliance shall be installed in accordance with -- Manufacturer ? s installation instructions -- AS NZS -- Local regulations and municipal building codes Inst

Operation guide iHeat Combined water and central heating system Important This appliance shall be installed in accordance with -- Manufacturer ? s installation instructions -- AS NZS -- Local regulations and municipal building codes Installation servicing and repair shall be carried out only by authorised personnel Please retain this manual for future reference Warning Improper installation adjustment alteration service or maintenance can cause property damage personal injury or loss of life For more information about buying living and servicing of Rinnai appliances call RINNAI Rinnai New Zealand Limited Pavilion Drive Mangere Auckland PO Box Auckland Airport Auckland Phone Fax Email info rinnai co nz Web rinnai co nz youtube com rinnainz contents About your Rinnai iHeat About the iHeat thermostat Operating in manual mode Operating in timer mode Fan settings Care of your iHeat Advanced settings Safety Troubleshooting General information Installation checklist Installer details Limited warranty About your Rinnai iHeat Congratulations on the purchase of your Rinnai iHeat combined water and heating system The Rinnai iHeat is a ducted home heating system that uses hot water from your Rinnai In ?nity continuous ow water heater to warm air and circulate it around your home Rinnai In ?nity continuous ow installed ??external or internal models available Rinnai iHeat installed in the ceiling space or under the oor Ducting outlets ??up to each outlet provides approximately kW Rinnai thermostat controller provides multiple control options Suitability The Rinnai iHeat may be retro ?tted to any home with an existing Rinnai In ?nity continuous ow water heater or both units can be installed simultaneously The Rinnai iHeat can be installed in the ceiling space or under the oor It must not be mounted in areas subject to direct splashing ??this is relevant to under oor installations that could be exposed to water Speci ?cation summary -- Power output nominal kW maximum kW dependent on installation -- No outlets up to each outlet provides approximately kW -- Heating area up to m ? depending on where you live and how well insulated your house is -- E ?ciency delivers heat at the same e ?ciency as the Rinnai In ?nity -- Noise level of fan sounds like an air conditioning unit The Rinnai In ?nity provides hot water to the iHeat air handler unit heat exchanger The heat exchanger extracts the heat from the hot water and transfers it to a steady stream of air This air is fed into the ducting system and is distributed into each room Water is returned to the In ?nity for reheating The Rinnai iHeat is controlled via a wall thermostat which has three fan speed settings and can control up to four di ?erent schedule periods per day Ensure the Rinnai In ?nity is positioned where overnight operation will not disturb occupants or neighbours iHeat operation guide -A - About the iHeat thermostat Main screen selections and display Current time Temp setting Current day week Current room temp Current system setting Mon System Auto System Fan Fan Auto