Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Cc3300 user guide 1 CC SimpleLink Wi-Fi and IoT Solution With MCU LaunchPad Getting Started Guide User's Guide Literature Number SWRU A June ?? Revised June CContents Introduction Prerequisites Getting Started Download and Install Software Con ?gure Board

CC SimpleLink Wi-Fi and IoT Solution With MCU LaunchPad Getting Started Guide User's Guide Literature Number SWRU A June ?? Revised June CContents Introduction Prerequisites Getting Started Download and Install Software Con ?gure Board Install USB Driver Compile Download and Debug Option Code Composer Studio CCS Option IAR Workbench Option GCC Summary Acronyms Used Revision History Table of Contents SWRU A ?? June ?? Revised June Copyright ? Texas Instruments Incorporated Submit Documentation Feedback Cwww ti com List of Figures Jumpers on the CC - LAUNCHXL Windows Device Manager Update Driver Software Browse for Driver Software USB Serial Port Device Manager Code Composer Studio v Setup CCS App Center Select CCS Projects to Import Select CCS Projects to Import Properties for tirtoscon ?g Select simplelink Project Editing main c Target Con ?gurations Import Target Con ?guration Set as Default Debug wlanstation IAR Embedded Workbench IDE Open simplelink eww Rebuild the simplelink Project Editing main c Select TI Stellaris Driver Debug Icon Cygwin Setup Cygwin Terminal Cygwin Terminal Running the Make Command Running the Make Install Command Editing main c Make ?le Command Output Screen Debugging wlanstation SWRU A ?? June ?? Revised June Submit Documentation Feedback Copyright ? Texas Instruments Incorporated List of Figures CUser's Guide SWRU A ?? June ?? Revised June CC SimpleLink Wi-Fi and IoT Solution With MCU LaunchPad Getting Started Guide This guide is intended to assist users in the initial setup and demonstration of the Getting Started with WLAN Station application The guide explains how to install an Integrated Development Environment IDE and then compile download and debug Getting Started with WLAN Station Introduction Prerequisites The user should have the following items ? One CC -LAUNCHXL ? An b g n GHz Wireless Access Point AP ? A computer running the Microsoft Windows or XP operating systems SimpleLink LaunchPad are trademarks of Texas Instruments Wi-Fi is a registered trademark of WiFi Alliance CC SimpleLink Wi-Fi and IoT Solution With MCU LaunchPad SWRU A ?? June ?? Revised June Getting Started Guide Submit Documentation Feedback Copyright ? Texas Instruments Incorporated Cwww ti com Getting Started Download and Install Software Download and install the following software ? CC SDK package ?? This guide assumes the use of the default installation folder C TI CC SDK Getting Started Con ?gure Board The jumpers on the CC -LAUNCHXL should be connected as shown in Figure It may be necessary to move a jumper from P -VCC to SOP Figure Jumpers on the CC -LAUNCHXL Install USB Driver Connect the CC -LAUNCHXL to the PC using the provided micro-USB cable Open the Windows Device Manager by selecting Start Menu Control Panel Device Manager The CC -LAUNCHXL will appear as two instances of ??USB - JTAG SWD ? under the category Other Devices as shown in Figure For both of these instances the driver software will need to be updated SWRU A ?? June ?? Revised June CC SimpleLink Wi-Fi and IoT Solution With MCU LaunchPad Submit Documentation Feedback Getting Started