Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Guide 95 monitors i can ? t see anything on my computer screen is the computer turned on there is a light on the cpu if the computer is on it will be lit is the computer plugged in check to see if all plugs are secure power cord from the computer to the p

monitors i can ? t see anything on my computer screen is the computer turned on there is a light on the cpu if the computer is on it will be lit is the computer plugged in check to see if all plugs are secure power cord from the computer to the power strip power strip to the wall socket is the power strip turned on there is a light on the strip if the strip is on the indictor light will be on is the monitor on there is a light on the monitor if the monitor is on it will be lit if it is turned on check the contrast and brightness buttons to see if they have been tampered with is the computer in power save or sleep mode move the mouse or press any key on the keyboard to see if the computer will wake-up are all peripherals plugged in verify that all cables and cords leading in to and out of your computer to insure they are all in tight and not disconnected secure the following to the computer monitor mouse keyboard printer network cable to computer and wall blue is the printer turned on there is a light on the printer if the printer is on the indictor light will be on is the printer plugged in here are some basic trouble shooting tips for new monitors the picture does not appear ? check to make sure the signal cable is ?rmly connected in the socket ? check to see if the computer system's power is on ? check that the brightness control is at the appropriate position not at the minimum the screen is not synchronized ? check to make sure the signal cable is ?rmly connected in the socket ? check that the output level matches the input level of your computer C ? make sure the signal timing of the computer system is within the speci ?cation of the monitor the position of the screen is not in the center ? adjust the h-size h-phase or v-size v-center controls ? check if the signal timing of the computer system is within the speci ?cation of the monitor the screen is too bright or too dark ? check if the brightness or contrast control is at the appropriate position not at the maximum or minimum ? check if the speci ?ed voltage is applied ? check if the signal timing of the computer system is within the speci ?cation of the monitor ? especially check the horizontal frequency the screen is shaking ? move all objects that emit a magnetic ?eld such as a motor or transformer away from the monitor ? check if the speci ?ed voltage is applied ? check if the signal timing of the computer system is within the speci ?cation of the monitor top hard drive my computer is on but it is frozen my cursor is stuck on the hourglass and won ? t let me