Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Programming guide 2 SoMachine EIO SoMachine Programming Guide www schneider-electric com EIO CThe information provided in this documentation contains general descriptions and or technical characteristics of the performance of the products contained herein

SoMachine EIO SoMachine Programming Guide www schneider-electric com EIO CThe information provided in this documentation contains general descriptions and or technical characteristics of the performance of the products contained herein This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for speci ?c user applications It is the duty of any such user or integrator to perform the appropriate and complete risk analysis evaluation and testing of the products with respect to the relevant speci ?c application or use thereof Neither Schneider Electric nor any of its a ?liates or subsidiaries shall be responsible or liable for misuse of the information contained herein If you have any suggestions for improvements or amendments or have found errors in this publication please notify us No part of this document may be reproduced in any form or by any means electronic or mechanical including photocopying without express written permission of Schneider Electric All pertinent state regional and local safety regulations must be observed when installing and using this product For reasons of safety and to help ensure compliance with documented system data only the manufacturer should perform repairs to components When devices are used for applications with technical safety requirements the relevant instructions must be followed Failure to use Schneider Electric software or approved software with our hardware products may result in injury harm or improper operating results Failure to observe this information can result in injury or equipment damage ? Schneider Electric All rights reserved EIO CTable of Contents Safety Information About the Book Part I Introduction Chapter Introduction to Programming Programming Chapter Managing Projects with SoMachine Main Tasks Part II Managing Your Project Chapter Home General Information General Description of the Main Selection Screen Accessing General Functions Show Existing Machine Show Existing Machine Create New Machine Create New Machine Sub-Tasks Start with Standard Project Start with Empty Project Start with TVD Architecture Start with Application Start with Existing Project Machine Work ow Machine Work ow Sub-Tasks Commission Machine - Start with Project Commission Machine - Upload Project from Device Update Firmware Learning Center Learning Center Chapter Properties General Overview of the Properties Tab Description of the General Task Description of the Description Task Description of the Custom Information Task EIO CChapter Con ?guration General Information General Description of the Con ?guration Tab Graphical Con ?guration Editor General Description Adding and Deleting Devices Con ?guring Devices Detecting Con ?guration Errors Accessing Programming and Application Functions with the Graphical Con ?guration Editor Creating Network Connections Chapter Program General Information General Description of the Program Tab Managing the Application Objects Adding Tasks Adding and Declaring POUs Adding Libraries Adding and Declaring Remanent Variables Adding a Symbol Con ?guration Adding Other Objects Introduction to Data Logging Introduction to Network Variables List NVL Adding Devices Adding Controller Adding Expansion Modules Adding Communication Managers Adding Devices to a Communication Manager Adding Devices from Template Managing the Libraries Generalities About Libraries Library Management in SoMachine