Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

lab guide LAB SETUP LAB FORTIGATE WIRELESS CONFIGURATION USING A FORTIAP DEVICE Exercise Con ?guring a wireless LAN LAB DEVICE IDENTIFICATION Exercise BYOD con ?guration for a VAP LAB IMPROVING WIRELESS SECURITY WITH WPA-ENTERPRISE SECURITY Exercise PEAP

LAB SETUP LAB FORTIGATE WIRELESS CONFIGURATION USING A FORTIAP DEVICE Exercise Con ?guring a wireless LAN LAB DEVICE IDENTIFICATION Exercise BYOD con ?guration for a VAP LAB IMPROVING WIRELESS SECURITY WITH WPA-ENTERPRISE SECURITY Exercise PEAP using local user group Exercise Captive Portal LAB CUSTOM AP PROFILES Exercise Con ?guring rogue AP detection LAB PUTTING IT ALL TOGETHER Exercise Using FortiAuthenticator for PEAP authentication Exercise Setting up Full Mesh Wireless on FortiGate Unit Using Two FortiAP Units C ? Lab Setup Please note that the following information is for reference only this setup will have been completed by the instructor The following instruction assumes a FortiGate VM and FortiAP per student You may adapt the instruction to use a physical FortiGate device if you prefer The FortiAP device used in this training is the B however you may also use a di ?erent device and adapt the instruction accordingly You also require a FortiAuthenticator VM per student however you may use the inbuilt trial license For desktop virtualization we use VMware Player in this instruction First install the VMware Player application on your PC You will require administrator privileges to do this Next copy the FortiGate and FortiAuthenticator VMs in OVF format which will be used for this class and open and import both VMs with the VMware Player application We use two interfaces on the FGT one as the default route and wireless AP distribution system and one for the internal network Note this setup relies on DHCP being available on the network the laptops and APs connect to The FortiAP B has Power-over-Ethernet interfaces therefore you may use a PoE switch however the mesh lab does require a power supply for the AP connecting to the wireless mesh The setup used in this training uses the Ethernet port of the laptop The Virtual Network Editor vmnetcfg exe is required for this setup and is not included in VMware Player by default therefore you need to install VMware Workstation on another system and copy this ?le from the Programs File directory on the source system to the target system with the VMware Player Note that you must use the version of Workstation compatible with your version of player The FortiGate uses the following VMware vmnet interfaces Vmnet host-only which maps to port Vmnet bridged which maps to port From the Virtual Network Editor edit interface Vmnet host-only and change the subnet IP to and disable the DHCP service on this interface From VMware Player edit the FGT VM settings and choose vmnet for port the ?rst interface in the list and vmnet for port From VMware Player edit the FortiAuth VM settings and choose vmnet for port the ?rst interface in the list Con ?gure the PC vmnet interface as Start up the FGT VM and connect to the console and format the log disk this is required for local logging and for other services to function C ? Lab Setup When the FGT restarts connect to the CLI set