Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Specs guide Guide to Insulation Product Speci ?cations Introduction The Guide to Insulation Product Speci ?cations was updated by the National Insulation Association Technical Information Committee in February after the Committee Days meeting This guide l

Guide to Insulation Product Speci ?cations Introduction The Guide to Insulation Product Speci ?cations was updated by the National Insulation Association Technical Information Committee in February after the Committee Days meeting This guide lists ASTM federal and military speci ?cations that pertain to the thermal insulation industry It encompasses both industrial and commercial mechanical insulations as well as building envelope and ?re resistance insulations Related application and ?nishing accessory materials also are included Some government construction agencies General Services Administration Department of Housing and Urban Development Department of Defense Corps of Engineers etc issue speci ?cations or standards that designated insulation materials This guide is intended to serve the limited purpose of describing in a general way the speci ?cations and standards so designated It should be kept in mind that the materials listed in this guide are subject to change as are the speci ?cations and standards themselves Users are encouraged to review the current version of the applicable speci ?cation and or standard This guide organizes each speci ?cation by type ASTM federal or military number and title and describes its scope NIA Associate Members that manufacture products that claim conformance to the referenced speci ?cation are listed below each speci ?cation Do not rely upon the guide to determine whether a product meets contract speci ?cations or to obtain approvals under purchase orders or contracts These determinations must be made by careful examination of the contract speci ?cations the manufacturer ? s literature and the provision of the government speci ?cation or standard referred to in the contract documents For speci ?c product information and speci ?cations compliance consult the particular manufacturer Ordering Information To order a copy of an ASTM speci ?cation contact the following Order Department ASTM International Barr Harbor Drive West Conshohocken PA Tel - Fax - www astm org Requests for copies of federal and military speci ?cations should be made on company letterhead and sent to the following address Robbins Ave Philadelphia PA - Allow - working days for processing Hard copies of this guide can be downloaded from the NIA website NIA Sunset Hills Rd Suite Reston VA Tel - Fax - www insulation org ASTM Guides Practices and Test Methods The following selected ASTM standards describe test methods and practices to determine speci ?c characteristics of building and construction materials and shall not be used to specify materials These Updated February Cmethods may be referenced in ASTM standards or other speci ?cation and standards ASTM standards must be reviewed every ?ve years and if not revised either approved again or withdrawn Standards pertaining to thermal insulation generally are developed by ASTM Committee C- on Thermal Insulation and thus are identi ?ed with the pre ?x C followed by a three- or four-digit number A two-digit number following the dash omitted in this document indicates the year that the standard was adopted or if revised the year of last revision Users are advised to refer to the current version of the