Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

EXCAVATOR SPEC GUIDE 2015 Bobcat Company Net Operating Std. Bucket Breakout Max

EXCAVATOR SPEC GUIDE 2015 Bobcat Company Net Operating Std. Bucket Breakout Max. Dig Max. Reach Model HP Weight (lbs.) (cu. ft.) Force (lbs.) Depth at Ground Level 418 10.2 2,593 .54 1,865 6’ 10’ 2” E20 13.9 4,306 1.1 4,684 8’ 6” 14’ E26 24.8 5,666 2.9 4,991 8’ 6” 14’ 11” E32 33.5 7,183 3.9 6,968 10’ 3” 16’ 4” E32i 24.8 7,183 3.9 6,968 10’ 3” 16’ 4” E35 33.5 7,468 3.9 6,968 10’ 3” 17’ 2” E35i 24.8 7,468 3.9 6,968 10’ 3” 17’ 2” E42 42.7 9,246 3.9 9,183 10’ 6” 17’ 3” E45 42.7 10,077 5.9 7,650 10’ 10” 18’ 7” E50 49.8 10,677 5.9 8,977 11’ 7” 19’ 6” E55 49.8 12,313 5.9 8,977 12’ 11” 20’ E63 59.4 13,779 5.9 9,731 13’ 6” 20’ 5” E85 59.4 18,960 9.5 14,509 15’ 6” 23’ 11” Bobcat Company Bobcat compact excavators allow access to all major service areas using the swing-open tail- gate and side access hood. Filters, fluid checks, air cleaner, battery and other maintenance points are simple to access, making it easy to make maintenance part of your routine. Side panels are also simply removed for additional engine access. Indicate 11 on inquiry card Caterpillar Inc. Net Operating Std. Bucket Breakout Max. Dig Max. Reach Model HP Weight (lbs.) (cu. yds.) Force (lbs.) Depth at Ground Level 300.9D 18 2,170 .49-.95* 2,000 5’ 8” 9’ 11” 301.4C 17.7 3,241 .60-2.0* 3,597 7’ 4” 12’ 301.7D CR 17.7 3,726 .60-2.0* 3,190 7’ 7” 12’ 7” 301.7D 17.7 4,068 .60-2.0* 4,226 7’ 3” 12’ 2” 302.2D 17.9 4,464 .60-2.0* 4,406 8’ 2” 13’ 6” 302.4D 17.7 5,115 1.24-3.24* 4,900 7’ 11” 13’ 2” 302.7C 20.7 5,681 1.24-3.24* 5,058 8’ 4” 14’ 8” 303E CR 23.5 7,782 1.6-6.96* 6,385 9’ 15’ 9” 303.5E CR 31.6 8,139 1.6-6.96* 7,419 9’ 6” 16’ 8” 303.5E2 23.5 8,103 1.6-6.96* 7,419 9’4” 16’ 6” 304E CR 40 8,838 1.9-9.9* 8,498 10’ 3” 17’ 1” 304E2 40.2 8,655 1.9-9.9* 8,498 10’ 3” 17’ 1” 305E CR 40.2 11,217 1.9-9.9* 10,050 10’ 9” 17’ 10” 305E2 CR 40.2 11,334 1.9-9.9* 10,049 10’ 9” 17’ 6’” 305.5E2 CR 44.1 11,863 1.9-9.9* 11,443 11’ 5” 18’ 6” 305.5E CR 44.2 11,938 1.9-9.9* 11,445 11’ 4” 18’ 6” 308E CR SB 65 18,371 3.5-14.8 9,015 13’ 7” 22’ 9” 308E2 CR SB 65 18,519 3.5-14.8 9,015 13’ 6” 23’ 314E CR 89 32,600 .27-1.0 12,800 19’ 6” 28’ 6” 312E 91 33,080 .27-1.0 12,800 19’ 10” 28’ 3” 311F RR 70 30,600 .27-1.0 11,465 18’ 4” 26’ 7” 313F L GC 70 32,200 .27-1.0 12,800 19’ 9” 28’ 3” 316E 113 38,801 .46-1.19 15,500 21’ 7” 30’ 5” 318E 113 42,340 .46-1.19 16,700 21’ 7” 30’ 5” 321D LCR 148 53,308 .61-2.05 23,223 22’ 32’ 1” 320E RR 152 54,900 .61-2.08 23,400 22’ 1” 30’ 9” 323F L 161 56,438 .61-2.08 23,400 22’ 1” 32’ 4” 326F L 203 64,831 .68-2.46 26,500 22’ 4” 33’ 2” 329F L 239 68,209 .68-2.58 24,953 25’ 6” 36’ 7” 335F L CR 200 83,703 .68-2.58 27,700 22’ 11” 34’ 11” 336F L 303 80,500 .95-3.52 31,810 26’ 10” 38’ 5” 336F L XE Hybrid 303 81,800 .95-3.52 31,810 26’ 10” 38’ 5” 349F 396 107,200 1.2-5.0 40,240 26’ 11” 39’ 10” 352F 396 117,500 1.2-5.0 40,240 26’ 5” 39’ 9” 374F 472 156,461 2.5-6.0 64,003 28’ 2” 43’ 2” 390F 524 190,204 2.8-8.5 62,203 31’ 8” 48’ 2” 323F L SLR 161 53,100 .69 NA 38’ 4” 51’ 7” 326F L SLR 203 64,831 .75-.90 NA 48’ 4” 60’ 6” 329F L SLR 239 68,180 .75-.90 NA 48’ 5” 60’ 5” M313D** 128 33,270 .24-1.20 20,907 (N) 17’ 4” 27’ 10” M315D** 137 37,633 .50-1.65 22,725 (N) 18’ 8” 29’ 5” M322D** 165 49,052 .57-2.05 31,472 (N) 21’ 3” 33’ 10” M318F** 169 42,549 .5-1.65 22,705 19’ 4” 30’ 2” M320F** 169 46,385 .5-1.65 22,427 20’ 7” 32’ *Cubic feet **Wheeled Caterpillar Inc. All F Series machines feature ground-level access to grease points, fluid taps and filters; doors designed to help prevent debris entry; and cooling systems set up to enable easy cleaning. Specifically, the 313F GC comes with a C3.4 engine that meets Tier 4 Final with- out diesel exhaust fluid and incorporates a maintenance-free DPF. A pilot manifold in the valve block means fewer components and less service required. The fuel tank has a remote drain tube in the pump compartment for easy removal of water and sediment. The engine oil drain tube makes oil changes quick and easy without requiring special tools. Indicate 10 on inquiry card Gehl Net Operating Std. Bucket Breakout Max. Dig Max. Reach Model HP Weight (lbs.) (cu. yds.) Force (lbs.) Depth at Ground Level Z17 GEN:2 14.5 3,836 .06 3,417 7’ 2.6” 12’ 2.1” Z25 19.7 6,217 .16 4,079 9’ 8” 15’ 9” Z35 GEN:2 23.9 8,214 .16 5,643 10’ 8” 17’ 3.5” Z45 GEN:2 37.7 10,814 .24 6,497 11’ 7.8” 18’ 10” Z80 GEN:2 54.6 18,136 .44 11,332 14’ 4.4” 23’ 5.1” Gehl Performing OEM recom- mended maintenance is critical to assure your equip- ment’s efficient and continu- ous operation. Gehl’s Tier 4-compliant excavators have been designed to make that task quick and easy through the use of tool-free access panels, remote grease points and easily accessible filters. In addition, the new LCD monitor allows owners to set programmable maintenance reminders, allowing them to adjust the interval between maintenance procedures. Indicate 12 on inquiry card EXCAVATOR SPEC GUIDE Excavators are only profitable if they are working when needed and can be cost- efficiently maintained in peak operating condition. As such, manufacturers are building in features designed to keep equipment productive in the field for longer periods, and to enable quick service or repair when required. The following pages provide a glimpse at some of these features, along with current model specifications. Sort through this information to find the right combination of qualities for your jobsites, then turn to the reader service card following page 34 or visit the Buyers Guide at ForConstructionPros.com for more information on specific brands or models. 2015 14 EQUIPMENT TODAY | June 2015 ForConstructionPros.com Gradall Industries, Inc. Net Operating Std. Bucket Breakout Max. Dig Max. Reach Model HP Weight (lbs.) (cu. yds.) Force (lbs.) Depth at Ground Level D152* 220 32,500 .5 12,000 14’ 5” 25’ 6” XL3100 IV* 218 40,930 .88 17,990 18’ 1” 27’ 2” XL4100 IV* 245 49,684 1.13 24,900 19’ 11” 30’ 2” XL5100 IV* 265 57,670 1.6 24,900 24’ 1” 33’ 8” XL3300 III* 152 39,295 .88 19,300 18’ 5” 27’ 3” XL4300 III* 153 43,580 1.13 25,405 21’ 3” 30’ 4” XL5300 III* 153 51,216 1.6 25,405 24’ 7” 33’ 10” XL3200 III 152 39,240 .88 19,300 19’ 2” 27’ 5” XL4200 III 153 46,862 1.13 25,405 22’ 30’ 6” XL5200 III 153 54,452 1.6 25,405 25’ 4” 33’ 11” *Wheeled Gradall Industries New Gradall Series V hydraulic excavators have Tier 4 Final-compliant Volvo Penta diesel engines meeting the highest global emissions standards while reducing fuel consumption. They also feature high-performance, high-reliability 24-volt electrical systems and a new operator safety option, providing better rollover protection. All models are equipped with a telescoping, tilting boom that can do the work of many different machines, even in tunnels and under bridges where conventional booms cannot work. Indicate 15 on inquiry card JCB Net Operating Std. Bucket Breakout Max. Dig Max. Reach Model HP Weight (lbs.) (cu. yds.) Force (lbs.) Depth at Grade Level 8008 12 2,094 .3-.61* 2,091 5’ 7” 10’ 2” 8018 19 4,017 .62-1.47* 3,642 9’ 13’ 4” 8029 32.7 6,321 1.08-5.07* 5,170 10’ 15’ 3” 8035ZTS 32.7 8,049 1.08-5.07* 7,194 11’ 6” 17’ 5” 8040ZTS 45 9,480 1.06-4.6* 8,340 11’ 7” 18’ 5” 8045ZTS 45 10,472 1.06-4.6* 9,487 12’ 3” 19’ 2” 8055 45 11,660 1.06-4.6* 9,487 12’ 3” 19’ 6” 67C-1 51.5 14,740 2.25-8.8* 10,611 12’ 11” 21’ 85Z-1 60.8 18,298 2.25-9.89* 12,837 11’ 11” 22’ 2” 86C-1 60.8 18,960 2.25-9.89* 12,837 14’ 4” 23’ 3” 90Z-1 70.3 18,975 2.25-9.89* 12,837 13’ 6” 23’ 8” 100C-1 70.3 21,457 2.25-9.89* 16,231 14’ 9” 24’ JS145 109 34,430 .307-1.15 20,667 19’ 10” 28’ 5” JS160NLC 125 40,644 .5-1.15 26,104 20’ 7” 29’ 9” JS190NLC 125 44,099 .46-1.18 26,104 21’ 8” 29’ 10” JS220LC/XD 172 49,714 .52-1.56 34,835 22’ 31’ 8” JS220LR 172 49,714 .36-.72 34,835 39’ 3” 50’ 8” JS260LC/XD 197 61,160 1.0-1.91 43,154 23’ 8” 34’ 6” JS260LR 197 61,160 .36-.72 43,154 50’ 6” 61’ 3” JS330LC/XD 271 73,387 1.54-2.41 43,000 26’ 10” 38’ 4” JS360 282 84,596 1.11-3.06 60,296 26’ 6” 38’ JZ235 172 51,194 .5-2.35 34,835 21’ 7” 31’ 9” *Cubic feet JCB JCB’s excavator range now features Tier 4 Final engines in all models from the JS145 to the JS220. These Ecomax engines don’t require diesel particulate filters or regular regeneration, reducing time and money spent on maintenance. Tier 4 Final models also have a 34% larger cooling pack, with both the charge air cooler and the air conditioning con- denser now fully hinged to uploads/s1/ excavator-spec-guide 1 .pdf