Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Flexible Impeller Guide 2 IMPELLER IDENTIFICATION GUIDE The impeller is a very

Flexible Impeller Guide 2 IMPELLER IDENTIFICATION GUIDE The impeller is a very important security device. Its task is to pump the water through the cooling system of the engine. But remember that the impeller should be replaced every year. And always make sure you get a Johnson Pump original impeller. Then you’ll know that it matches your pump exactly. Take good care of the cooling system - change to a new impeller every year Order No. 09-950-9300 JP Impuller This is how to ﬁt the new one Lubricate the shaft and the inside of the pump body and the end cover. Use Johnson Pump lubrication to help develop prime and prevent damage from dry-running the pump at initial start-up. Mount the impeller by mak- ing a pushing and twisting movement in the rotating direction. Lubricated impellers should not be stored for extended periods of time. Engine should be run after installation of a new impeller to wash out the lubrica- tion. These recommendations apply to any service work on the pump and its components that require the use of lubrication inside the pump for assembly and start-up. Warning! Do not use any petroleum-based products to lubricate the inside of the pump. Only use Johnson Pump Lubrication. Other prod- ucts can damage the impeller, which will damage the pump and lead to engine failure. Do not run the impeller without water or lubricant, this can cause engine failure or a ﬁre. This is how to remove the old impeller Johnson Pump Impeller Bar We can now offer a new impeller stand that can rotate and have room for 10 of our most popular spare impellers up to size F7. Display size: Height 750mm/29.5" incl. topsign Width 500 mm/19.7" Included are: • Impellerguide with 1/1 size illustration of all our impellers • 5 pcs 09-806B-1 • 5 pcs 09-808B-1 • 5 pcs 09-810B-1 • 5 pcs 09-1026B-1 • 5 pcs 09-801B • 5 pcs 09-1027B-1 • 5 pcs 09-1028B • 5 pcs 09-1052S-9 • 5 pcs 09-1077B-9 • 5 pcs 09-824P-9 Order No: 09-46854 Complete stand including above impellers Remove the impeller with a slip joint plier or a Johnson Pump Impuller. Give your impeller a good life! Lubricate with Johnson Pump Impeller Lubricant, optimize the priming ability at ﬁrst start or after seasonal storage. Now available in Counter display box with 150 pcs Impeller lubricant packages. Order No. 09-47086 A new impeller compound MC97 MC97 has been developed to meet new environmental regulations for rubber manufacturing processes and will replace our regular Neoprene compound. The development of MC97 has also resulted in an extended service life of the impeller compared to impellers in Neoprene. MC97 requires new guidelines for handling impeller replacement as well as guidelines for standard- and engine cooling ﬂexible impel- ler pumps for OEM-engine manufactures. Please note that these guidelines are also valid for our regular Neoprene compound. All new MC97 impellers, impeller kits and service kits containing MC97 impellers will be supplied with a JP impeller lubricant. NEW! 3 35,2 mm / 1.38" width 12,7 mm / 0.5" } 45,2 mm / 1.77" width 12,8 mm / 0.5" } 40 mm / 1.57" width 19 mm / 0.74" } 40 mm / 1.57" width 19 mm / 0.74" } F2 F3 F35 Impeller article number 09-1077B-9 Nitrile (oil resistant) Impeller article number 09-1052S-9 Nitrile (oil resistant) Impeller article number 09-806B-1 MC97 (for cooling) replaces Jabsco 4528-0001 Europe&USA inner diameter 9,5 mm Impeller article number 09-808B-1 MC97 (for cooling) replaces Jabsco 22405-0001 Europe&USA inner diameter 12 mm The impellers are illustrated in full scale which means that you can identify your impeller without knowing the part number. To ensure 100% size when printing, do not allow your printer driver to scale the output to ﬁt your paper. 4 50,8 mm / 2.0" width 22 mm / 0.87" } 50,8 mm / 2.0" width 22 mm / 0.87" } 50,8 mm / 2.0" width 22 mm / 0.87" } F4 F4 Impeller article number 09-810B-1 MC97 (for cooling) replaces Jabsco 18653-0001 Europe&USA Impeller article number 09-810B-9 Nitrile (oil resistant) inner diameter 12 mm Impeller article number 09-1026B-1 MC97 (for cooling) replaces Jabsco 673-0001 Europe&USA Impeller article number 09-1026B-9 Nitrile (oil resistant) replaces Jabsco 673-0003 Europe&USA inner diameter 12,7 mm Impeller article number 09-824P-9 Nitrile (oil resistant) replaces Jabsco 6303-0003 Europe&USA 5 57,1 mm / 2.24" width 31,5 mm / 1.24" } 57,1 mm / 2.24" width 31,5 mm / 1.24" } 57,1 mm / 2.24" width 31,5 mm / 1.24" } 57,1 mm / 2.24" width 48,2 mm / 1.89" } F5 Impeller article number 09-801B Neoprene (for cooling) replaces Jabsco 4568-0001 Europe&USA inner diameter 15,9 mm/key Impeller article number 09-804B-9 Nitrile (oil resistant) inner diameter 20 mm/key F6 Impeller article number 09-1027B-1 MC97 (for cooling) replaces Jabsco 1210-0001 Europe&USA Impeller article number 09-1027B-9 Nitrile (oil resistant) replaces Jabsco 1210-0003 Europe&USA Impeller article number 09-812B-1 MC97 (for cooling) replaces Jabsco 13554-0001 USA F5 F5 6 65 mm / 2.56" width 50,2 mm / 1.97" } 65 mm / 2.56" width 80 mm / 3.15" } F7 F75 Impeller article number 09-1028B Neoprene (for cooling) replaces Jabsco 17937-0001 Europe&USA Impeller article number 09-1028B-9 Nitrile (oil resistant) replaces Jabsco 17937-0003 Europe&USA Impeller article number 09-821B Neoprene (for cooling) 7 95 mm / 3.74" width 63 mm / 2.48" 95 mm / 3.74" width 63 mm / 2.48" Impeller article number 09-819B Neoprene (for cooling) replaces Jabsco 836-0001 Europe& 17935-0001 USA Impeller article number 09-819B-9 Nitrile (oil resistant) replaces Jabsco 836-0003 Europe& 17935-0003 USA Impeller article number 09-1029B Neoprene (for cooling) replaces Jabsco 836-0001 Europe& 17935-001 USA F8 F8 95 mm / 3.74" width 63 mm / 2.48" } 95 mm / 3.74" width 63 mm / 2.48" } 8 Impeller article number 09-802B Neoprene (for cooling) replaces Jabsco 6760-0001 Europe&USA 95 mm / 3.74" width 88,5 mm / 3.48" } Impeller article number 09-814B Neoprene (for cooling) replaces Jabsco 21676-0001 Europe& 17936-0001 USA F9 F9 95 mm / 3.74" width 88,5 mm / 3.48" } } 9 95 mm width 130 mm / 5.12" } / 3.74" Impeller article number 09-820B Neoprene (for cooling) F95 Johnson Pump AB, Business Ares Marine Nastagatan 19, P .O. Box 1436, SE-701 14 Orebro, Sweden, Phone 46 19 27 23 72 Johnson Pumps of America, Inc. 10509 United Parkway, Schiller Park, Illinois 60176, USA, Phone 847-671-7867, Fax 847-671-7909 Johnson Pump (Australia) Pty. Ltd. P .O. Box 427, Cannon Hill, QLD. 4170, Australia, Phone 617 3899 9933, Fax 61 7 3899 8574 www.johnson-pump.com uploads/s1/ impeller-guide.pdf