Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

IPCLK1000 V200R002 User Guide Issue 06 Date 2009-12-20 Huawei Technologies Prop

IPCLK1000 V200R002 User Guide Issue 06 Date 2009-12-20 Huawei Technologies Proprietary Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Proprietary IPCLK1000 User Guide About This Document Issue 06 (2009-12-20) Huawei Technologies Proprietary 1 About This Document Purpose This document describes the structures and functions of the IPCLK1000. It provides guides on how to perform installation, commissioning, and routine maintenance. Related Versions The following table lists the product version related to this document. Product Name Version IPCLK1000 V200R002 Intended Audience This document is intended for: z Network planners z Installers z Network operators z System engineers z Field engineers z Site maintainers Organization This document consists of six chapters and one appendix and is organized as follows. Chapter Content 1 Overview of the IPCLK1000 This describes the functions of, typical networking modes of, and specifications for the IPCLK1000. About This Document IPCLK1000 User Guide 2 Huawei Technologies Proprietary Issue 06 (2009-12-20) Chapter Content 2 Description of the IPCLK1000 This describes the structures and principles of the IPCLK1000. 3 Installation and Commissioning This describes the installation and commissioning procedures. 4 Interconnection Between the IPCLK1000 and an IP Clock Client This describes the procedures for interconnecting the IPCLK1000 and an IP clock client and for verifying the interconnection. 5 IPCLK1000 Maintenance This describes the maintenance items for the IPCLK1000 and the procedures of parts replacement. 6 Basic Operations for the IPCLK1000 This describes the basic operations for the IPCLK1000. A Acronyms and Abbreviations This describes the acronyms and abbreviations used in the document. B Communication Ports Used by the IPCLK1000 This describes the communication ports used by the IPCLK1000. Conventions Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazard with a high level of risk that, if not avoided, will result in death or serious injury. Indicates a hazard with a medium or low level of risk which, if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation that, if not avoided, could cause equipment damage, data loss, and performance degradation, or unexpected results. Indicates a tip that may help you solve a problem or save time. Provides additional information to emphasize or supplement important points of the main text. IPCLK1000 User Guide About This Document Issue 06 (2009-12-20) Huawei Technologies Proprietary 3 General Conventions Convention Description Times New Roman Normal paragraphs are in Times New Roman. Boldface Names of files, directories, folders, and users are in boldface. For example, log in as user root. Italic Book titles are in italics. Courier New Terminal display is in Courier New. Command Conventions Convention Description Boldface The keywords of a command line are in boldface. Italic Command arguments are in italics. [ ] Items (keywords or arguments) in square brackets [ ] are optional. { x | y | ... } Alternative items are grouped in braces and separated by vertical bars. One is selected. [ x | y | ... ] Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected. { x | y | ... } * Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected. <> It means that you must enter or select a value for the parameter that is enclosed in angle brackets during command configuration. GUI Conventions Convention Description Boldface Buttons, menus, parameters, tabs, windows, and dialog titles are in boldface. For example, click OK. > Multi-level menus are in boldface and separated by the ">" signs. For example, choose File > Create > Folder. About This Document IPCLK1000 User Guide 4 Huawei Technologies Proprietary Issue 06 (2009-12-20) Keyboard Operation Format Description Key Press the key. For example, press Enter and press Tab. Key 1+Key 2 Press the keys concurrently. For example, pressing Ctrl+Alt+A means the three keys should be pressed concurrently. Key 1, Key 2 Press the keys in turn. For example, pressing Alt, A means the two keys should be pressed in turn. Mouse Operation Action Description Click Select and release the primary mouse button without moving the pointer. Double-click Press the primary mouse button twice continuously and quickly without moving the pointer. Drag Press and hold the primary mouse button and move the pointer to a certain position. Update History Updates between document versions are cumulative. Therefore, the latest document version contains all updates made to previous versions. Updates in Issue06 (2009-12-20) This is the fifth commercial release. Compared with issue 05 (2009-11-05), the following part is added. 3.6.9 Configuring the SNTP Server Compared with issue 05 (2009-11-05), no deletion and change is made. Updates in Issue 05 (2009-11-05) This is the forth commercial release. Compared with issue 04 (2009-09-20), the following changes are made: Parts Changes 1.2.2 Network Security The description of service IP addresses for signaling message and event message communication between IPCLK1000 and IPCLK1000 User Guide About This Document Issue 06 (2009-12-20) Huawei Technologies Proprietary 5 AP is added. 3.2.3 Planning Data The secondary service IPCLK1000 IP address is added, and it used to transfer event message between IPCLK1000 and AP. Updates in Issue 04 (2009-09-20) This is the third commercial release. Compared with issue 03 (2009-07-05), no addition, deletion and change is made. The description in this issue is polished. Updates in Issue 03 (2009-07-05) This is the second commercial release. Compared with issue 02 (2009-05-25), the following changes are made: “2.2.4 Ports”: IPCLK1000 obtains standard 8kHz clock from UCKI board which is the interface board of Access Gateway. “2.3.6 Optical Cable”: IPCLK1000 adopts single-mode optical cable. Updates in Issue 02 (2009-05-25) This is the first commercial release. Compared with issue 01 (2008-10-30), the description of log management is added. Updates in Issue 01 (2008-10-30) Initial commercial release. Compared with issue V100R001 06 (2008-10-25), the following part is added. 1.2.2 Network Security 3.6.8 Configuring the Protocol Module IPCLK1000 User Guide Contents Issue 06 (2009-12-20) Huawei Technologies Proprietary i Contents 1 Overview of the IPCLK1000.....................................................................................................1-1 1.1 Introduction to Clock over IP........................................................................................................................1-1 1.2 Introduction to the IPCLK1000.....................................................................................................................1-1 1.2.1 Position of the IPCLK1000 in the Network.........................................................................................1-1 1.2.2 Network Security .................................................................................................................................1-2 1.2.3 Features of the IPCLK1000 .................................................................................................................1-2 1.3 Clock Signal Processing................................................................................................................................1-3 1.3.1 Input and Output of Clock Signals.......................................................................................................1-3 1.3.2 Switching Between Clock Sources ......................................................................................................1-3 1.3.3 Working Principles of the IPCLK1000 as an IP Clock Client..............................................................1-4 1.3.4 Clock Synchronization.........................................................................................................................1-4 1.3.5 Clock Packet Capture...........................................................................................................................1-4 1.3.6 Clock Packet Statistics.........................................................................................................................1-4 1.4 OM Functions................................................................................................................................................1-4 1.4.1 OM Modes ...........................................................................................................................................1-4 1.4.2 Introduction to OM Functions..............................................................................................................1-5 1.4.3 Security Management ..........................................................................................................................1-6 1.4.4 Configuration Management .................................................................................................................1-6 1.4.5 Software Management .........................................................................................................................1-6 1.4.6 Fault Management ...............................................................................................................................1-6 1.4.7 Log Management .................................................................................................................................1-6 1.5 Networking Capability..................................................................................................................................1-7 1.5.1 Major Types of Network Elements Supported.....................................................................................1-7 1.5.2 Transmission Port Specifications.........................................................................................................1-7 1.5.3 Requirements for the IP Network.........................................................................................................1-8 1.5.4 Typical Networking Modes..................................................................................................................1-8 1.6 Product Specifications.................................................................................................................................1-11 1.6.1 Standard Compliance .........................................................................................................................1-11 1.6.2 Environmental Requirements.............................................................................................................1-12 1.6.3 Electrical Specifications.....................................................................................................................1-13 1.6.4 Clock Performance Specifications.....................................................................................................1-13 1.6.5 Reliability Specifications...................................................................................................................1-14 Contents IPCLK1000 User Guide ii Huawei Technologies Proprietary Issue 06 (2009-12-20) 1.6.6 Structural Specifications ....................................................................................................................1-14 2 Description of the IPCLK1000.................................................................................................2-1 2.1 Components of the IPCLK1000....................................................................................................................2-2 2.1.1 Hardware Components.........................................................................................................................2-2 2.1.2 Software Components..........................................................................................................................2-2 2.2 Case of the IPCLK1000 ................................................................................................................................2-2 2.2.1 Components of the Case ......................................................................................................................2-2 2.2.2 Panel.....................................................................................................................................................2-4 2.2.3 LEDs....................................................................................................................................................2-5 2.2.4 Ports .....................................................................................................................................................2-6 2.3 Cables of the IPCLK1000 .............................................................................................................................2-9 2.3.1 Cable List.............................................................................................................................................2-9 2.3.2 PGND Cable ......................................................................................................................................2-11 2.3.3 –48 V DC Power Cable......................................................................................................................2-11 2.3.4 110 V/220 V AC Power Cable ...........................................................................................................2-12 2.3.5 Straight-Through Cable......................................................................................................................2-12 2.3.6 Optical Cable .....................................................................................................................................2-14 2.3.7 GPS Clock Cable ...............................................................................................................................2-15 2.3.8 Unbalanced Input BITS Signal Cable................................................................................................2-15 2.3.9 Output Clock Cable............................................................................................................................2-16 2.3.10 Balanced Input BITS Signal Cable ..................................................................................................2-16 2.3.11 8 kHz/1 PPS Input Clock Cable.......................................................................................................2-17 2.4 Software of the IPCLK1000........................................................................................................................2-18 2.4.1 Host Software.....................................................................................................................................2-18 2.4.2 LMT Application................................................................................................................................2-19 3 Installation and Commissioning.............................................................................................3-1 3.1 Requirements for the Installation Environment.............................................................................................3-2 3.2 Preparing for the Installation and Commissioning........................................................................................3-2 3.2.1 Tools, Instruments, and Device for the Installation..............................................................................3-2 3.2.2 Obtaining the Software Package..........................................................................................................3-3 3.2.3 Planning Data.......................................................................................................................................3-3 3.2.4 Unpacking the IPCLK1000..................................................................................................................3-4 3.3 Installing the IPCLK1000 Hardware.............................................................................................................3-5 3.3.1 Installation Scenarios...........................................................................................................................3-5 3.3.2 Installing the IPCLK1000 Case in a Cabinet .......................................................................................3-6 3.3.3 Installing Cables...................................................................................................................................3-6 3.3.4 Checking the Installation .....................................................................................................................3-8 3.4 Installing and Configuring the LMT ...........................................................................................................3-11 3.4.1 Connecting the LMT to the IPCLK1000............................................................................................3-11 3.4.2 Setting uploads/s1/ ipclk1000-user-guide.pdf