Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Quick guide ARI-MyValve Rev. t000024093-2 2412 Quick guide ARI-myValve A detail

Quick guide ARI-MyValve Rev. t000024093-2 2412 Quick guide ARI-myValve A detailed user support can be found at the menu "Help" You can use our website http://www.ari-armaturen.de/de/download/myvalve.html to check your ARI-myValve version of timeliness and update it if necessary (refer also to item 7.0 Version-check / update by Internet). Quick guide ARI-MyValve Page 2 Rev. t000024093-2 2412 1.0 About ARI-myValve ARI-myValve is a program that helps you calculate your system components quickly, safely and reliably. For each selected product, it also generates the product data as well as various documents (e.g. ordering data, spare part drawings, data sheets or operating instructions). Quick guide ARI-MyValve Rev. t000024093-2 2412 Page 3 2.0 Installation instructions 2.1 Network installation on Windows operating systems ARI-myValve can be installed in two different ways. In this Chapter we describe how to install ARI-myValve for using it on your PC on the Windows operating system and in your network with Windows operating system. If you like to work with ARI-myValve in your network, please copy the folder "ARImyValve" from the DVD to a folder of your choice. The installation is completed now. ARI-myValve can then be started in the needed language version. After the installation the program can be used with the CAD-Library which is integrated in the program. 2.2 Local installation on Windows operating systems To install the ARI-myValve calculation program, start the installation file "setup_ARImyValve.exe" from the DVD. Note: For installation you need administrator rights! Please observe the information during the installation and specify the program directory (usually C:\Programme\ARImyValve\). For the program directory of ARI-myValve, the user should have writing access, so he can perform an update by himself when there is a version modification (otherwise, the update process must be done with administrator rights). After successful installation, you can start at C:\Programme\ARImyValve\ in your preferred language. Note: After this installation the CAD-Library can not be used! Quick guide ARI-MyValve Page 4 Rev. t000024093-2 2412 3.0 Calculation 3.1 Select module Because of various different basics of product calculations, codes and product allocations ARI-myValve is subdivided into several modules for the different product groups. With ARI-Product-Selector a large part of ARI's product range can be selected without prior calculation 3.2 Enter values Enter all for the calculation of the respective product necessary calculation data and start with the button "Calculate". Here for example: "ARI-Control valves ARI- STEVI-Calculation" Quick guide ARI-MyValve Rev. t000024093-2 2412 Page 5 3.3 Product list The result of the calculation is shown in a product list. With product parameters (e.g. for STEVI: "Material", "Sealing", "Plug variation" and "Series") the displayed product list can be filtered. Select "show all" if you want to display all possible options of the previous picklist for further filtering. In order to avoid product restrictions, the filter lists will be rebuilt after each calculation. 3.4 Managing / Saving results 1. Create project data (refer to item 4.0 Create project dataFehler! Verweisquelle konnte nicht gefunden werden.) 2. Allocate a Tag-No. or Calculation-Nr. 3. Put-out in PDF file (see item 3.5) The unique definition of the filename for the PDF-output, the drawings and calculations are allocated as follows: Project-No. + TAG-No. = Filename.xml/.pdf (e.g. 2009001-w015-calc.pdf) Quick guide ARI-MyValve Page 6 Rev. t000024093-2 2412 3.5 Product information 1. By using the context menu of the product list (right mouse-button) After selecting a product from the product list, information can be queried/issued about it. - PDF-output: Output of the calculation in PDF-format - Drawing: Sparepart drawings with parts and dimensions - Data sheets - Operating Instructions - Pressure-Temp: Pressure-temperature- diagram - Flow characteristic: Kvs-characteristic- diagram - Save calculation: refer to 3.6 Save calculation 2. By using the program field "Documents“ (top right of the window) 3.6 Save calculation At the menu "File" you can manage/save the calculations, input values and results. Save calculation: - the calculation is saved in the respective module directory (.xml). The file name will be generated automatically including the Project-No. and TAG-No. (Note: if the file name was edited manually, the file in the project management will not be considered furtheron.) - you can also save a project from the context menue of the product list (refer to item 3.5 Product informationFehler! Verweisquelle konnte nicht gefunden werden.) - for "Changing the saving directory“ refer to item 5.4 Change directory. Load calculation: - opens the browser window to open the calculation file. Load last calculation: - opens the last saved calculation. Quick guide ARI-MyValve Rev. t000024093-2 2412 Page 7 4.0 Create project data Fill in the fields and confirm your entries with the button "Save". Note: Please do not use spaces or special characters (especially "/“). If a PDF-output is generated (refer to item 3.5) and the calculation data are saved (refer to item 3.6), they will be deposited to the project data. In the result data list, you can see the projects which are already stored with associated calculations. when there are several projects, you can search by using a filter. If a project was selected from the list, you can load the saved calculation data, the PDF-output and the sparepart drawings by using the corresponding button (if they were stored). With the button "Delete record" the selected project can be deleted. With the button "Delete calculation" the selected calculation can be deleted. Attention: The deleting can not be undone! The project will only be cleared when all the calculation data were deleted. (Notes to save your data, refer to item 6.0 Saving your data) Quick guide ARI-MyValve Page 8 Rev. t000024093-2 2412 5.0 Settings 5.1 Calculation basis - Calculation in SI- or ANSI-units - Calculation with absolut- or gauge pressure 5.2 User settings Are shown in the PDF-documents. Attribute "Differential pressure-isolation“: Setting parameter for the selection of nominal diameters for isolation valves and control valves 5.3 Media data Herewith you can create your own media data (liquids and vapors/gases), if they are not included in the database yet. (The uniqueness is defined by name and temperature of the medium.) At the media selection, the new created medium can be choosen via "free data-set entry" (at the bottom of the list). Quick guide ARI-MyValve Rev. t000024093-2 2412 Page 9 5.4 Change directory Enter the new directory path manually or open with "Selection" the browser window. You can work with local-level or network-level. A folder "ARI-myValve" will automatically be created with sub-structure for each module. If you have very specific requirements in relation to project-backup or archiving, please contact us. 6.0 Saving your data At the menu "File“ you can create a backup/summary in ZIP-format for the current project. You can choose if you want to save "only PDF-Report“, "PDF-Report and Drawing or "all drawings and data to the selected project“ in a folder-bundled secure. The backup will be saved in the default directory "C:/Documents and Settings/user/arimyvalve/ZIP/", if no other location has been defined (refer to item 5.4 Change directory). Note: Back-up your data continuously in ZIP-format on an additional disk. Quick guide ARI-MyValve Page 10 Rev. t000024093-2 2412 7.0 Version-check / update by Internet 7.1 Check on current version If you do not have the latest ARI-myValve-version, you can perform an update (refer to item 7.3 Update) 7.2 Proxy settings If you can not connect to the internet, please adjust your proxy settings. 7.3 Update - Please start the download of the ZIP-file first: (example based on vers. 1.02) ARI-myValve-Update-1.02. - Exit ARI-myValve. - Unzip the ZIP-file und and start the EXE-file: <update_ARImyValve_1.02.exe> - Confirm the required information, ARI- myValve is updated on your computer. - Restart ARI-myValve again. uploads/s3/ ari-guide.pdf