Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Increase Speed/ Jog Forward (from an Anchor Position) Heading Lock Steer Left/

Increase Speed/ Jog Forward (from an Anchor Position) Heading Lock Steer Left/ Jog Left (from an Anchor position) Anchor Memory Bank Route Record Prop ON/OFF Cruise Control Activates at 1.0 mph Steer Right/ Jog Right (from an Anchor Position) Manual Mode Exits any mode Decrease Speed/ Jog Backwards (from an Anchor Position) Route Playback 1-8  Manual /  GPS Features Sync Remote to Motor: press ( ) and ( ) within 10 seconds of applying power Compass Calibration: press ( ) + 1,1,1 Alignment Calibration: press ( ) + 1,1,2 Audio Mode 1: press ( ) + 1,3,1 Audio Mode 2: press ( ) + 1,3,2 Audio Mode 3: press ( ) + 1,3,3 *Refer to Owner’s Manual for detailed instructions Required Calibrations and Settings* To ensure proper operation, it is necessary that the Pinpoint Wireless Remote be synced to the Motor and the Compass and Alignment Calibrations are completed. It is recommended that the calibrations be performed with the motor deployed in a fi shing location. MANUAL MODE OPERATION After it is powered up, the trolling motor will operate in Manual mode by default or if the GPS signal is lost while operating in a GPS mode. To change from any function to the Manual mode, press the Manual mode button ( ). SPEED CONTROL • To start the propeller, press the Propeller ( ) • To stop the propeller, press the Propeller ( ) button • To increase motor speed by one level, press the Increase Speed ( ) button • To decrease speed by one level, press the Decrease Speed ( ) button Holding the Increase Speed or Decrease Speed button will cause the speed level to increase to the maximum speed level or decrease to the minimum speed level. STEERING • To turn left, press the Steer Left ( ) button • To turn right, press the Steer Right ( ) button The available steering range allows the trolling motor to turn beyond 180° for operation in reverse GPS MODE OPERATION Status LED is solid when the motor has GPS fi x. Status LED blinks slowly when a GPS mode is active. SETTING THE ANCHOR POSITION • Press the Anchor ( ) button to lock current GPS position ADJUSTING THE ANCHOR POSITION (JOG) While in Anchor, the Anchor position can be adjusted in fi ve foot increments (Jog), relative to boat orientation, in the direction selected: • Press the Left arrow ( ), Right arrow ( ), Forward ( ) or Backward ( ) STORING AN ANCHOR POSITION • Press and hold any of the numbered Memory ( 1-8 ) buttons for two seconds A stored Anchor position can be overwritten with a new Anchor position by repeating the same procedure. RECALLING A STORED ANCHOR POSITION • Press and release the desired Memory ( 1-8 ) button If the desired stored Anchor Position is over a mile away from your current location, the trolling motor will emit an error tone. EXITING ANCHOR POSITION • Press the Anchor ( ) button or press the Manual Mode ( ) button SETTING THE HEADING LOCK To lock in the trolling motor’s heading and navigate in a straight line: • Steer the trolling motor in the desired direction • Press the Heading Lock ( ) button ADJUSTING HEADING LOCK The Heading can be adjusted using the Steer Left and Steer Right buttons. The speed can be adjusted by using the Increase and Decrease Speed buttons. EXITING HEADING LOCK • Press the Heading Lock ( ) button or the Manual Mode ( ) button RECORDING AND STORING A ROUTE • Press the Route Record ( ) button and begin navigating along your desired Route You can use Heading Lock and Manual mode at any time while recording a Route. Status LED will blink and unit will beep as waypoints are recorded. • Press and hold any of the numbered Memory ( 1-8 ) buttons to stop recording and to store the Route The trolling motor will emit a tune to conﬁ rm that the Route is stored. To overwrite a stored route, use the same procedure as Storing a new Route. RECALLING A STORED ROUTE • Press the Route Playback ( ) button • Press and release the desired numbered Memory ( 1-8 ) button The trolling motor will return you to the nearest point on the recalled Route then navigate the longest leg of the route. ROUTE TRAVEL AND COMPLETION While travelling along a stored route, the direction of travel can be reversed by recalling the stored route again. Upon reaching the end of a stored route, the system will enter Anchor mode SETTING CRUISE CONTROL • Press the Cruise Control ( ) button to set the Cruise Control at 1.0 mph Cruise Control can be activated while in Heading Lock or Route Playback. ADJUSTING CRUISE CONTROL SPEED • Cruise Control ( ) speed can be increased or decreased in 0.1 mph increments by using the Increase Speed ( ) button or Decrease Speed ( ) button EXITING CRUISE CONTROL • Press the Cruise Control ( ) button to turn off Cruise Control © 2014 MotorGuide / Lowell, MI 49331 / motorguide.com 69527 Rev. A uploads/Ingenierie_Lourd/ increase-speed-jog-forward-prop-on-off-from-an-anchor-position.pdf