Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Cd800 user guide 1 Datacard CD Card Printer User ? s Guide February Part No - Rev B CNotice Please do not attempt to operate or repair this equipment without adequate training Any use operation or repair you perform that is not in accordance with the info

Datacard CD Card Printer User ? s Guide February Part No - Rev B CNotice Please do not attempt to operate or repair this equipment without adequate training Any use operation or repair you perform that is not in accordance with the information contained in this documentation is at your own risk Trademark Acknowledgments Datacard is a registered trademark and service mark of Entrust Datacard Corporation in the United States and other countries MasterCard is a registered trademark of MasterCard International Incorporated Visa is a registered trademark of Visa International Service Association All other product names are the property of their respective owners Proprietary Notice The design and information contained in these materials are protected by US and international copyright laws All drawings and information herein are the property of Entrust Datacard Corporation All unauthorized use and reproduction is prohibited Entrust Datacard Park Place Shakopee MN Phone ? ? Fax ? ? www entrustdatacard com Copyright ? Entrust Datacard Corporation All rights reserved ii CCompliance Statements Liability The WARNING and CAUTION labels have been placed on the equipment for your safety Please do not attempt to operate or repair this equipment without adequate training Any use operation or repair in contravention of this document is at your own risk Safety All Datacard products are built to strict safety speci ?cations in accordance with CSA UL ? requirements and the Low Voltage Directive EC Therefore safety issues pertaining to operation and repair of Datacard equipment are primarily environmental and human interface The following basic safety tips are given to ensure safe installation operation and maintenance of Datacard equipment ? Connect equipment to a grounded power source Do not defeat or bypass the ground lead ? Place the equipment on a stable surface table and ensure oors in the work area are dry and non ? slip ? Know the location of equipment branch circuit interrupters or circuit breakers and how to turn them on and o ? in case of emergency ? Know the location of ?re extinguishers and how to use them ABC type extinguishers may be used on electrical ?res ? Know local procedures for ?rst aid and emergency assistance at the customer facility ? Use adequate lighting at the equipment location ? Maintain the recommended temperature and humidity range in the equipment area iii CRegulatory Compliance Notice for USA FCC notice This equipment has been tested and found to comply with the limits for Class A computing devices pursuant to Part of FCC rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy If this equipment is not installed and used in accordance with this instruction manual it may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense Changes or