Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

Installation Guide for Linux Release 19.0 ANSYS, Inc. January 2018 Southpointe

Installation Guide for Linux Release 19.0 ANSYS, Inc. January 2018 Southpointe 2600 ANSYS Drive 000408 Canonsburg, PA 15317 ANSYS, Inc. and ANSYS Europe, ansysinfo@ansys.com Ltd. are UL http://www.ansys.com registered ISO (T) 724-746-3304 (F) 724-514-9494 9001: 2008 companies. Revision Information The information in this guide applies to all ANSYS, Inc. products released on or after this date, until superseded by a newer version of this guide. This guide replaces individual product installation guides from previous releases. Copyright and Trademark Information © 2017 ANSYS, Inc. Unauthorized use, distribution or duplication is prohibited. ANSYS, ANSYS Workbench, AUTODYN, CFX, FLUENT and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries located in the United States or other countries. ICEM CFD is a trademark used by ANSYS, Inc. under license. CFX is a trademark of Sony Corporation in Japan. All other brand, product, service and feature names or trademarks are the property of their respective owners. FLEXlm and FLEXnet are trademarks of Flexera Software LLC. Disclaimer Notice THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION INCLUDE TRADE SECRETS AND ARE CONFID- ENTIAL AND PROPRIETARY PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS. The software products and documentation are furnished by ANSYS, Inc., its subsidiaries, or affiliates under a software license agreement that contains provisions concerning non-disclosure, copying, length and nature of use, compliance with exporting laws, warranties, disclaimers, limitations of liability, and remedies, and other provisions. The software products and documentation may be used, disclosed, transferred, or copied only in accordance with the terms and conditions of that software license agreement. ANSYS, Inc. and ANSYS Europe, Ltd. are UL registered ISO 9001: 2008 companies. U.S. Government Rights For U.S. Government users, except as specifically granted by the ANSYS, Inc. software license agreement, the use, duplication, or disclosure by the United States Government is subject to restrictions stated in the ANSYS, Inc. software license agreement and FAR 12.212 (for non-DOD licenses). Third-Party Software See the legal information in the product help files for the complete Legal Notice for ANSYS proprietary software and third-party software. If you are unable to access the Legal Notice, contact ANSYS, Inc. Published in the U.S.A. Table of Contents 1. Installation Prerequisites for Linux ........................................................................................................ 1 1.1. System Prerequisites ......................................................................................................................... 3 1.1.1. CAD Support ............................................................................................................................ 3 1.2. Disk Space and Memory Requirements ............................................................................................. 4 1.3. Requirements for the GPU Accelerator in Mechanical APDL ............................................................... 5 1.4. Additional Hardware and Software Requirements ............................................................................. 5 1.5.Third-Party Software and Other Security Considerations .................................................................... 6 2. Platform Details ...................................................................................................................................... 9 2.1. Utilizing CPU Hyperthreading Technology with ANSYS CFD Solvers .................................................. 14 2.2. Compiler Requirements for Linux Systems ....................................................................................... 14 2.3. Select Your Installation .................................................................................................................... 15 3. Installing ANSYS Products for a Stand-alone Linux System ................................................................. 17 3.1. Pre-Installation Instructions for Download Installations .................................................................... 18 3.2. Product Download Instructions ....................................................................................................... 18 3.3. Installing from a USB Drive .............................................................................................................. 19 3.4. Mounting the DVD Instructions for DVD Installations (Linux x64 Only) .............................................. 20 3.5. Product Installation ......................................................................................................................... 21 3.5.1. Specifying CAD Configurations ............................................................................................... 24 3.5.2. ANSYS License Manager Installation ....................................................................................... 24 3.5.2.1. Registering the License Server ....................................................................................... 26 4. Installing ANSYS Products and the License Server on Different Linux Machines ................................ 27 4.1. Pre-Installation Instructions for Download Installations .................................................................... 28 4.2. Product Download Instructions ....................................................................................................... 28 4.3. Installing from a USB Drive .............................................................................................................. 29 4.4. Mounting the DVD Instructions for DVD Installations (Linux x64 Only) .............................................. 30 4.5. Product Installation ......................................................................................................................... 31 4.5.1. Specifying CAD Configurations ............................................................................................... 34 4.5.2. ANSYS License Manager Installation ....................................................................................... 35 4.5.2.1. Registering the License Server ....................................................................................... 36 4.5.3. Network Installation and Product and CAD Configuration ....................................................... 37 4.5.3.1. Export the /ansys_inc Directory ............................................................................... 37 4.5.3.2. Run the Product & CAD Configuration Manager on All Client Machines ........................... 38 5. Post-Installation Instructions ............................................................................................................... 39 5.1. Post-Installation Procedures for Mechanical APDL and ANSYS Workbench Products ......................... 40 5.1.1. Post-Installation Procedures for ANSYS CFX ............................................................................. 41 5.1.1.1. Setting up ANSYS TurboGrid Release 19.0 ....................................................................... 42 5.1.1.2. Using the ANSYS CFX Launcher to Set Up Users .............................................................. 43 5.1.2. Post-Installation Procedures for ANSYS Fluent ......................................................................... 43 5.1.3. Post-Installation Procedures for ANSYS Polyflow ..................................................................... 44 5.1.4. Post-Installation Procedures for ANSYS ICEM CFD .................................................................... 44 5.1.5. Post-Installation Procedures for ANSYS Autodyn ..................................................................... 44 5.1.6. Post-Installation Procedures for ANSYS FENSAP-ICE ................................................................. 44 5.1.7. Post-Installation Procedures for Other Products ...................................................................... 46 5.2. Product Localization ....................................................................................................................... 46 5.2.1.Translated Message File Installation for Mechanical APDL ....................................................... 47 5.3. Launching ANSYS, Inc. Products ....................................................................................................... 48 6. Silent Mode Operations ........................................................................................................................ 49 6.1. Silent Product and License Manager Installation .............................................................................. 50 6.2. Silent Product Configuration/Unconfiguration ................................................................................. 52 6.3. Silent Media Installation .................................................................................................................. 52 iii Release 19.0 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates. 6.3.1. Silent Uninstall ....................................................................................................................... 53 7. Configuring CAD Products .................................................................................................................... 55 7.1. Using the Product & CAD Configuration Manager ............................................................................ 55 7.1.1. Unconfiguring ........................................................................................................................ 56 7.1.2. Running the Product & CAD Configuration Manager in Batch Mode .................................... 56 7.1.3. NX Configuration ................................................................................................................... 57 7.2. Configuring the Geometry Interface for NX for ANSYS Workbench Products ..................................... 58 8. Uninstalling the Software ..................................................................................................................... 59 9.Troubleshooting .................................................................................................................................... 61 9.1. Installation Troubleshooting ............................................................................................................ 61 9.1.1. Gathering Diagnostic Information .......................................................................................... 61 9.1.2.The GUI Installation Process Hangs ......................................................................................... 61 9.1.3.The Target Machine Does Not Have a DVD Drive ...................................................................... 61 9.1.4. Product & CAD Configuration Manager Help Does Not Load .................................................... 62 9.1.5. Cannot Enter Data in Text Fields .............................................................................................. 62 9.1.6. Download and Installation Error Messages .............................................................................. 62 9.1.7. System-related Error Messages ............................................................................................... 63 9.1.8. High Performance Computing Error Messages ........................................................................ 63 9.1.9. INSTALL Command Appears as Lowercase in USB Installation .................................................. 63 9.2. Installation Troubleshooting - Mechanical APDL .............................................................................. 63 9.2.1.Your batch jobs terminate when you log out of a session ......................................................... 63 9.2.2. Mechanical APDL Documentation File for User Interface Error Messages .................................. 63 9.2.3. Launcher Error Messages ........................................................................................................ 64 9.2.4. FORTRAN Runtime Error Messages ......................................................................................... 64 9.2.4.1. Intel Linux 64 Systems ................................................................................................... 64 9.2.4.2. Intel EM64T Linux x64 Systems ....................................................................................... 64 9.2.4.3. AMD Opteron Linux x64 Systems ................................................................................... 64 9.3. Installation Troubleshooting - ANSYS Workbench ............................................................................ 65 9.3.1. Startup or Graphics Problems ................................................................................................. 65 9.4. Installation Troubleshooting - ANSYS CFX ........................................................................................ 65 9.4.1. CFX Distributed Parallel Runs Fail ............................................................................................ 65 9.5. Contacting Technical Support ......................................................................................................... 65 10. Applications Included with Each Product ........................................................................................... 67 Release 19.0 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates. iv Linux Installation Guide List of Tables 1.1. Supported Linux Platforms ..................................................................................................................... 3 1.2. CAD Support by Platform ........................................................................................................................ 3 2.1. OpenMotif Versions for SUSE Linux Enterprise ......................................................................................... 9 2.2. OpenMotif Versions for Red Hat Enterprise Linux ..................................................................................... 9 2.3. Compiler Requirements for All Linux Versions ........................................................................................ 14 5.1. Startup Commands ............................................................................................................................... 48 v Release 19.0 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates. Release 19.0 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates. vi Chapter 1: Installation Prerequisites for Linux This document describes the steps necessary to correctly install and configure all ANSYS, Inc. products on Linux platforms for Release 19.0. These products include: • ANSYS Structural Mechanics – ANSYS Mechanical Products (includes Mechanical APDL, Mechanical and ANSYS Composite PrepPost, where supported) – ANSYS Customization Files for User Programmable Features • ANSYS Explicit Dynamics – ANSYS Autodyn – ANSYS LS-DYNA • ANSYS Fluid Dynamics – ANSYS CFX (includes ANSYS CFD-Post) – ANSYS Fluent (includes ANSYS CFD-Post) – ANSYS TurboGrid – ANSYS Polyflow (includes ANSYS CFD-Post) – ANSYS CFD-Post only • ANSYS ICEM CFD • ANSYS Additional Tools – ANSYS Icepak (includes ANSYS CFD-Post) – Remote Solve Manager Standalone Services • ANSYS Geometry Interfaces – ACIS – CATIA,Version 4 – CATIA,Version 5 – NX – Parasolid 1 Release 19.0 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates. Notes Not all products may be available on all Linux platforms. See the remainder of this document for detailed information on which products are available on which platforms. At Release 19.0, ANSYS BladeGen, Vista CCD, Vista CPD, Vista RTD, and Vista AFD are not supported on Linux platforms. ANSYS Workbench and ANSYS EKM Desktop are installed by default as product components to most ANSYS, Inc. products. ANSYS Workbench is not installed as part of the products under ANSYS Additional Tools. ANSYS Workbench includes the following applications: • DesignModeler • Design Exploration • Meshing • Remote Solve Manager • Fluent Meshing • FE Modeler • EKM Client Important Notice If you wish to run multiple releases of ANSYS, Inc. software, you MUST install them chronologically (i.e., Release 18.0 followed by Release 19.0). If you install an earlier release after installing Release 19.0, you will encounter licensing issues that may prevent you from running any products/releases. If you need to install an earlier release uploads/s3/ linux-installation-guide 2 .pdf