Remerciez-le!

Remerciez @Admin pour avoir partagé cet document gratuitement, de la manière la plus simple, en partageant sur les réseaux sociaux.

User’s Guide AWUS036NHA 150Mbps Wireless High Gain USB Adapter FCC STATEMENT Th

User’s Guide AWUS036NHA 150Mbps Wireless High Gain USB Adapter FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This device has been tested for compliance with FCC RF Exposure (SAR) limits in the typical laptop computer configuration and this device can be used in desktop or laptop computers. This device cannot be used with handheld PDAs (personal digital assistants). This device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter. SAR measurements are based on a 5mm spacing from the body and that compliance is achieved at that distance. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National restrictions This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Country Restriction Reason/remark Bulgaria None General authorization required for outdoor use and public service France Outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5 MHz Military Radiolocation use. Refarming of the 2.4 GHz band has been ongoing in recent years to allow current relaxed regulation. Full implementation planned 2012 Italy None If used outside of own premises, general authorization is required Luxembourg None General authorization required for network and service supply(not for spectrum) Norway Implemented This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund Russian Federation None Only for indoor applications Note: Please don’t use the product outdoors in France. TABLE OF CONTENT Package Contents ....................................................................................................................... 1 Chapter 1. Introduction ................................................................................................................ 2 1.1 Overview of the product .......................................................................................... 2 1.2 Features .................................................................................................................... 2 1.3 LED Status ................................................................................................................ 3 Chapter 2. Installation Guide ...................................................................................................... 4 2.1 Hardware Installation ............................................................................................... 4 2.2 Software Installation ................................................................................................ 4 2.2.1 Overview ....................................................................................................... 4 2.2.2 Software Installation for Windows XP ...................................................... 4 Chapter 3. Configuration for Windows XP ................................................................................ 9 3.1 Current Status .......................................................................................................... 9 3.2 Profile Management .............................................................................................. 11 3.2.1 Add or Modify a Configuration Profile ..................................................... 11 3.2.2 Remove a profile ........................................................................................ 15 3.2.3 Switch another Profile ............................................................................... 16 3.2.4 Export a Profile ........................................................................................... 16 3.2.5 Import a Profile ........................................................................................... 16 3.2.6 Scan Available Networks .......................................................................... 17 3.2.7 Auto Profile Selection Management ....................................................... 17 3.3 Diagnostics ............................................................................................................. 18 3.3.1 Check Driver Information .......................................................................... 19 3.3.2 Check Receive and Transmit Statistical Information ........................... 20 Appendix A: Specifications ...................................................................................................... 21 Appendix B: Glossary ............................................................................................................... 22 1 Package Contents The following contents should be found in your box:  One AWUS036NHA 150Mbps Wireless High Gain USB Adapter  One USB extension cable  One Installation CD for AWUS036NHA, including: • Atheros Wireless Client Utility and Drivers • User Guide • Other Helpful Information ) Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor. Conventions: The ‘Adapter’ mentioned in this user guide stands for AWUS036NHA 150Mbps Wireless High Gain USB Adapter without any explanations. 2 Chapter 1. Introduction Thank you for choosing AWUS036NHA 150Mbps Wireless High Gain USB Adapter. 1.1 Overview of the product The adapter is designed to provide a high-speed and unrivaled wireless performance for your notebook and PC. With a faster wireless connection, you can get a better Internet experience, such as downloading, gaming, video streaming and so on. The AWUS036NHA’s auto-sensing capability allows high packet transfer rate of up to 150Mbps for maximum throughput. It has good capability on anti-jamming; it can also interoperate with other wireless (802.11b/g) products. The adapter supports WEP, WPA and WPA2 encryption to prevent outside intrusion and protect your personal information from being exposed. The Quick Setup Wizard guides you step-by-step through the installation process; the Atheros Wireless Client Utility (ACU) helps you create a wireless connection immediately. With unmatched wireless performance, reception, and security protection, the AWUS036NHA is the best choice for easily adding or upgrading wireless connectivity. 1.2 Features  IEEE 802.11n, IEEE802.11g, IEEE802.11b standards  Supports WPA/WPA2 data security, IEEE802.1x authentication, TKIP/AES encryption, WEP encryption  Make use of IEEE 802.11n wireless technology to provide a wireless data rate of up to 150Mbps  supports automatically adjust to lower speeds due to distance or other operating limitations  Provides USB interface  Supports Ad-Hoc and Infrastructure modes  Good capability on anti-jamming  Supports roaming between access points when configured in Infrastructure mode  Ease to configure and provides monitoring information  Supports Windows 2000, XP, Vista, and Windows 7 3 1.3 LED Status LED Indications Status Working Status Status Green Flashing Alternately The adapter is trying to scan a networking connection. Activity Green Status Green Intermittently The adapter is already connected but is not transmitting or receiving data. Activity Green Status Green Flashing The adapter is transmitting or receiving data. Activity Green 4 Chapter 2. Installation Guide 2.1 Hardware Installation Connect the Adapter and your computer through the USB cable attached in package. The LED will light up when the Adapter is installed successfully and the PC is on. 2.2 Software Installation 2.2.1 Overview The Adapter’s Setup Wizard will guide you through the Installation procedure for Windows XP. The Setup Wizard will install the Atheros Wireless Client Utility (ACU) and drivers. When you install the hardware prior to before installing the software, the system will prompt “Found New Hardware Wizard”, click Cancel, and run the Setup Wizard program on the CD-ROM. The Setup steps for Windows 2000 and XP are similar with each other. This user guide takes Windows XP for example. 2.2.2 Software Installation for Windows XP 1. Insert the Resource CD into your CD-ROM drive, and the Figure 2-1 will appear. To continue, select the AWUS036NHA.There will be a menu including: Windows (Driver & Utility), and User Guide. Figure 2-1 2. Click AWUS036NHA to load the following screen and select your language. Click Next to continue. 5 Figure 2-2 3. Soon, Figure 2-3 will display after a moment. Click Next to continue. Figure 2-3 4. After License Agreement, you should choose a Setup type. It is recommended that you select Install Client Utilities and Driver. Select Install Driver Only to install driver only, select Make Driver Installation Diskette(s) to make the diskette(s) as the installation driver (shown in Figure 2-4). Click Next to continue. 6 Figure 2-4 5. Click Browse to change the destination location for the software, then click Next in the screen below (shown in Figure 2-5). Figure 2-5 6. After that, select the program folder, you should create a new folder name or select one from the Existing Folders list. It is recommended that you keep the default setting. Click Next to continue the installation. 7 Figure 2-6 7. Choose configuration tool, if you are not sure, please leave it default. Then click Next to continue. Figure 2-7 8. Click OK to continue the Installation. Wait a while for the setup as shown in Figure 2-8. 8 Figure 2-8 9. After all the steps above, you will see the screen below, click Finish to reboot the system. Figure 2-10 Now, carefully insert the device into the USB port of your computer. Windows will automatically detect the device and display the icon and below in the taskbar. 9 Chapter 3. Configuration for Windows XP Alfa AWUS036NHA can be configured by Atheros Wireless Client Utility (ACU) in Windows XP & 2000. This chapter describes how to configure your Adapter for wireless connectivity on your Wireless Local Area Network (WLAN) and use the data security encryption features. The configuration of the adapter uploads/s3/ guide-awus036nh.pdf